Masterrob Posted September 15, 2012 Report Share Posted September 15, 2012 I own my KAC PDW for almost 1 Year (open bolt). I'm not a skirmischer but I go every month to our families landhouse in the forest. And... It is in the forest that we have fun with our airsofts together with friends and family: just fun. Afterwards, the guns are not used for a month, not mentained, not lubricated, nor.... We shot minimum 250 mag's with the WE PDW without any single problem (even in the rain) so... What do you just do with your guns to have all these problems? Quote Link to post Share on other sites
snail Posted October 2, 2012 Report Share Posted October 2, 2012 Hi guys- Ive had an open bolt Pdw for about a year now and love it. can someone tell me where I can get a longer pistol grip for it. I have large-ish hands and would like something bigger than the stock one that comes with it Quote Link to post Share on other sites
jkpics Posted October 2, 2012 Report Share Posted October 2, 2012 It takes WE M4 grips, and RS M4 grips also WA grips with small mod, so there is really no limit. Quote Link to post Share on other sites
snail Posted October 2, 2012 Report Share Posted October 2, 2012 Thank you Quote Link to post Share on other sites
keewee7.62 Posted October 6, 2012 Report Share Posted October 6, 2012 (edited) Ive been using this for a year or so and love it. No problems getting it into New Zealand. Direct replacement, no mods necessary. http://www.opsgear.com/index/page/product/product_id/781/category_id/48/category_chain/20,48/product_name/M16++AR15+HOGUE+Pistol+Grip Edited October 6, 2012 by keewee7.62 Quote Link to post Share on other sites
tome Posted November 8, 2012 Report Share Posted November 8, 2012 Hi, I just read all the way back to page 10 and didn't find much on this so I'll ask Has anyone run their PDW on CO2 extensively? Any problems encountered? Cheers Tome Quote Link to post Share on other sites
The Walrus Posted January 6, 2013 Report Share Posted January 6, 2013 hey new to the fourms. just got myself the open (pull) bolt long version of this gun from a buddie that was having problems with it. (full auto would putter and drain all the gas). after some tinkering i found out that the trigger box just has to much stuff in such a small space. the hammer has a small latch that was grabbing the sear every other shot(when on full auto). notice the latch on the hammer circled in red and where it was catching in blue. but after sanding off that latch on the hammer the gun now works fine. Now if only i could find out why my nozzel is freezing so fast. P.S. photo stolen from thread starter. Quote Link to post Share on other sites
jkpics Posted January 6, 2013 Report Share Posted January 6, 2013 Likely the FA shear was bent after closing the gun with the selector on FA, it's a 3-4 USD part so no biggie. Quote Link to post Share on other sites
sandokan2001 Posted February 10, 2013 Report Share Posted February 10, 2013 I, there, im having a pdw for two years and lately i am having a very strange problem it fires well in single auto but in full when i fire the bolt wont stops until it run out off bbs it fires continuously even without pressing the trigger... Can you help me fixing the problem?? Thanks Quote Link to post Share on other sites
jkpics Posted February 12, 2013 Report Share Posted February 12, 2013 That sounds like another bent FA shear or another problem with the conecting FA rod. Quote Link to post Share on other sites
Crimson Posted February 12, 2013 Report Share Posted February 12, 2013 Want to pick one of these up for summer, someone is selling one but dont know what gen it is What upgrades should i consider Quote Link to post Share on other sites
3vi1-D4n Posted February 12, 2013 Report Share Posted February 12, 2013 Don't buy one, these things are too troublesome. I had 2 of these and they did not work well. Rather, the WE M4/XM177E2 and the SCAR has "less" problems. Quote Link to post Share on other sites
bankz5152 Posted February 13, 2013 Report Share Posted February 13, 2013 If it isnt already then get the Version 3 internals much much better than the V2 Version 2 WE magazines - 2 stage magazines that reduce cooldown Falcon Blue/Modify Tan/PDI W Hold Hop Rubber - All exellent. RATech NPAS New pistol grip the standard one is tiny and vile. Sent from my GT-I9300 using Tapatalk 2 Quote Link to post Share on other sites
jkpics Posted February 18, 2013 Report Share Posted February 18, 2013 Don't buy into all the about WE gen 2 gas mags, the only thing they do better then gen 1 is keep the gas inside the mag and not leaking out do to bad design, but yea a gen 3 PDW with Gen2 gas mags is the way to go, and it kicks *albatross*. Quote Link to post Share on other sites
bankz5152 Posted February 18, 2013 Report Share Posted February 18, 2013 What a stupid thing to say. The whole point is the hold gas better. They also do reduce cooldown. Standard mag will do about 70-80 shots semi auto. GenII will do about 90 - 100. Sent from my GT-I9300 using Tapatalk 2 Quote Link to post Share on other sites
jkpics Posted February 18, 2013 Report Share Posted February 18, 2013 Well the only thing that changed from gen 1 to gen 2 gas mags was the body design, the valve and every other part is the same, gen 1 was very leakty and gen 2 much better. Quote Link to post Share on other sites
bankz5152 Posted February 18, 2013 Report Share Posted February 18, 2013 Yeah so most of it? I.e the bits that needed improving.... Quote Link to post Share on other sites
jkpics Posted February 19, 2013 Report Share Posted February 19, 2013 Only the bit that was unable to hold the gas inside the mag, I think having the gas stay inside the mag is a worthwhile upgrade, maybe hats just me. Quote Link to post Share on other sites
ollie_ty Posted February 19, 2013 Report Share Posted February 19, 2013 Don't buy into all the about WE gen 2 gas mags, Only the bit that was unable to hold the gas inside the mag, I think having the gas stay inside the mag is a worthwhile upgrade, maybe hats just me. Are you sure thats what you think? Quote Link to post Share on other sites
bankz5152 Posted February 19, 2013 Report Share Posted February 19, 2013 Im not totally sure this guy has full grasp of how language works... Sent from my GT-P5113 using Tapatalk 2 Quote Link to post Share on other sites
jkpics Posted February 19, 2013 Report Share Posted February 19, 2013 The BS hype I was addressing is the cool down factor and more shots from a full mag, in a REAL/blind test I don't think anybody can tell them apart BUT WE M4 Gen 1 Gas mag Leaks And WE M4 Gen 2 Gas mag Don't leak Not a hard choice IMHO. Quote Link to post Share on other sites
bankz5152 Posted February 19, 2013 Report Share Posted February 19, 2013 The BS hype I was addressing is the cool down factor and more shots from a full mag, in a REAL/blind test I don't think anybody can tell them apart BUT WE M4 Gen 1 Gas mag Leaks And WE M4 Gen 2 Gas mag Don't leak Not a hard choice IMHO. >The BS hype I was addressing is the cool down factor and more shots from a full mag, in a REAL/blind test I don't think anybody can tell them apart BUT WE M4 Gen 1 Gas mag Leaks And WE M4 Gen 2 Gas mag Don't leak Not a hard choice IMHO. What a stupid thing to say. The whole point is the hold gas better. They also do reduce cooldown. Standard mag will do about 70-80 shots semi auto. GenII will do about 90 - 100. Sent from my GT-I9300 using Tapatalk 2 I tested it. The results as far as I remember are above. Quote Link to post Share on other sites
LordElpus Posted February 19, 2013 Report Share Posted February 19, 2013 Wasn't it the Gen 3 mags with the triple expansion chambers (as used in the G39 mags) the one with the improved cool down and shots per charge? Quote Link to post Share on other sites
Stuey Posted February 19, 2013 Report Share Posted February 19, 2013 There are no gen 3 mags are there? The main difference between 1 and 2 is as above, the gen 1 are an awful design and leak like there's no tomorrow, the gen 2 are a much better design and pretty easy to maintain. The slight performance increase is a nice bonus. Quote Link to post Share on other sites
LordElpus Posted February 19, 2013 Report Share Posted February 19, 2013 There are newer ones with 3 chamber design like the G39. The VN mags had the system before the M4s if memory serves Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.