alston251 Posted January 14, 2010 Report Share Posted January 14, 2010 Nice gun dude. Is that a G&P URX II? If so how is it? I might be using it to build a GBB SR-15 Link to post Share on other sites
Jim01 Posted January 14, 2010 Report Share Posted January 14, 2010 I agree about painting it...maybe its just the light reflection but it looks gold! Still very nice though Link to post Share on other sites
Bottlelot Posted January 14, 2010 Report Share Posted January 14, 2010 Bottlelot, Very Cool! I saw that over at SocalForums already  Question: is the URX really that golden?  -Shin  You know, it is and it isn't. The anodizing always comes out with a "goldish" tint, but it really depends on the color temp reflecting off of it. It's fairly noticeable in the sunlight, but in lower light conditions its manageable. Painting anodized aluminum is pretty difficult, so I'm probably going to leave it til' it really bothers me.  Nice gun dude. Is that a G&P URX II? If so how is it? I might be using it to build a GBB SR-15  I love it, install is interesting. It helps to have a full shop to put it together in. Don't think I could have done it without a vice at the very least. Once its on, it's golden Link to post Share on other sites
alston251 Posted January 14, 2010 Report Share Posted January 14, 2010 A vice?!? So did you have to use a AR clamp thinge to put it into the vice? And also does the front sight lock like it does on the VFC, KA and RS? Link to post Share on other sites
Bottlelot Posted January 14, 2010 Report Share Posted January 14, 2010 (edited) You need to hold the receiver still while rotating the foregrip down with a rubber pipe wrap, or a very specific tool to fit inside the grip. The standard AR15 armorers wrench does NOT work on this foregrip. Either way, once you get the gas tube in it's not going anywhere. And no, the front sight does not lock in the up or down position. Edited January 14, 2010 by Bottlelot Link to post Share on other sites
Whan Posted January 14, 2010 Report Share Posted January 14, 2010 Looks awesome Link to post Share on other sites
08kecarv Posted January 15, 2010 Report Share Posted January 15, 2010 The G&P URX is easier to install if you have the proprietary tool for it, but its not needed. I've gotten my URX on and off dozens of times with out tools or at the most, just a pair of needlenose pliers. It can be a pain to figure out how to get it seated in the right way to ensure that its on at its tightest as well as being perfectly straight and in line with the upper. After I think the second time I perfected my method of installing it. Â It's not that hard to put on and line up correctly, but taking it off can be a pain since when you install it, you're making it as tight as possible. That tightness means a great and solid URX, but a P.I.T.A. to take off the two locking screw things in the URX. Lemme tell you though, that thing is ROCK solid when its on. Oh and yeah the front sight doesn't have a locking mech, but it has a screw on the outside that allows you to adjust the tightness of it (meaning you can make it extremely hard to flip up and down all the way to just making it flop around). Â Alston, if you were looking for a G&P URX i'm currently selling mine. If you're interested shoot me a PM. Link to post Share on other sites
alston251 Posted January 15, 2010 Report Share Posted January 15, 2010 Thanks guys. IT all depends on when i wan't to start my project. And depends when the PTS ACR comes out. Since that's pirority. Link to post Share on other sites
Puding Posted January 15, 2010 Report Share Posted January 15, 2010 ares m110 Â Link to post Share on other sites
luvs2shoot Posted January 15, 2010 Report Share Posted January 15, 2010 ares m110  http://i46.photobucket.com/albums/f128/iri...SC_70240001.jpg  Puding,  That's the first thing I saw this morning on the forums - most excellent How does it perform? Write a review?  That would be the only Sr25 I would ever consider - engraved trademarks FTW  Well done -Shin Link to post Share on other sites
08kecarv Posted January 15, 2010 Report Share Posted January 15, 2010 Holy hot damn thats beautiful! I love KAC sooooooooo much  Does your M110 still retain full auto capabilities or only semi? Link to post Share on other sites
Tek-Spec Posted January 15, 2010 Report Share Posted January 15, 2010 puding, That is an awesome rifle, very well done. Link to post Share on other sites
Puding Posted January 16, 2010 Report Share Posted January 16, 2010 m110 is rock solid, externals are amazing, gearbox is smooth need to get out next weekend to check range accuracy, review will follow after masada and we scar reviews have been finish  you can still go full auto as the selector switch has a notch cut out to allow it to go past the block, personally i will be modifying the selector plate to restrict it to semi for when i go abroad and what to throw in a higher spring,  went with the ares as mid caps are know easily available and the quick change spring, have star/ares m4/m16 and love the externals, some better pictures know i have a little light  better pics of the markings Link to post Share on other sites
Hammerfall Posted January 16, 2010 Report Share Posted January 16, 2010 You were careful not to mention the internals How are they? Are they reflective of the notorious ARES shoddiness? Is it proprietary?  It looks brilliant externally, but i wrote it off as soon as it came out because it was ARES and not 100% correct.. maybe that was a silly thing to do? That might be why we see none too, same with their SOPMOD M14's. They are rare, and look excellent but 'word' has it they're shocking;y bad inside  My VFC SR16E3 10.5'' is stuck in customs right now. I have 12 lovely P-Mags to photo it with too, oh you lot will love it. Link to post Share on other sites
Ion Posted January 17, 2010 Report Share Posted January 17, 2010 Wow, if I was to buy another AEG, it would be an ARES M110, or a VFC SR15. Man that thing is nice. Link to post Share on other sites
Bottlelot Posted January 17, 2010 Report Share Posted January 17, 2010 Bottlelot, looks fantastic. I'd hit the rail and barrel with some Coyote Alumahyde II, but other than that, it looks just right. Â Have you used "Alumahyde"? I've got a real steel rifle I'm looking to trim out in CB, and after reading the product description this looks like the stuff. If it's as good as they are saying... Link to post Share on other sites
Puding Posted January 17, 2010 Report Share Posted January 17, 2010 You were careful not to mention the internals tongue.gif How are they? Are they reflective of the notorious ARES shoddiness? Is it proprietary?  not deliberate more i have not had it appart yet , i don;t have a problem with ares internals other than there use of propriatory parts at times, althought this has improved and parts and even full replacement gearboxs are avalaible know without to much problem  star internals where bad in the beginning but they improved, the clear gearbox did them no favours, ares where the oem producer for star and went out on there own and there internals have improved even more, i have ares m4/16 / and a few of the g36 line father has ares l1a1 never had a problem really, im limited to 1j in Ireland do where not putting to much strain on internals but in terms of endurance they all stand up, will try and post more about the internals when i get a chance to crack her open to help you out  i always find internals funny, in Ireland CA is pritty much not sold due to there presived bad internals, but then again the same people that ridicule this brand will buy an aeg and strip out the gearbox as there first action, so does it matter that the stock piston is not the best in the past? where as in other country no one has a problem with CA as much  as humans where programmed to remember the bad and complain when things do not work, but very rearly do people stand up and say all is well, so by defult you get all the horrow storys on forms, even if those horror storys are disproportional  sorry for the little rant will post more info when she is opened Link to post Share on other sites
Hammerfall Posted January 19, 2010 Report Share Posted January 19, 2010 My VFC SR-16E3 10.5'' has finally been released by HMRC, should get it on Friday. I have some stuff for it already, but I didn't have any luck getting a lead on an RS Aimpoint T-1, so I will settle with a replica for now. I am also wanting to source MIAD grip and ASAP sling mount, not sure where is best for all that, s'pose I will research and compare. Need it before 31st.. Link to post Share on other sites
fiddlesticks4220 Posted January 22, 2010 Report Share Posted January 22, 2010 Â Link to post Share on other sites
08kecarv Posted January 22, 2010 Report Share Posted January 22, 2010 Hell yes it finally came in!!! MINI REVIEW!!!!!!!!!!!! Link to post Share on other sites
fiddlesticks4220 Posted January 23, 2010 Report Share Posted January 23, 2010 Hell yes it finally came in!!! MINI REVIEW!!!!!!!!!!!! Â Sure bro, I am to lazy to type, so a video will have to do in the next few days. Link to post Share on other sites
ranger-arg Posted January 23, 2010 Report Share Posted January 23, 2010 (edited) VFC SR-15e3 Â Â comming soon willl be CTR stock, Miad Grip, and lots of pmags! Edited January 23, 2010 by ranger-arg Link to post Share on other sites
[BS]_MARS Posted January 23, 2010 Report Share Posted January 23, 2010 Those VFC guns have some of the best finishes I've seen on airsoft guns. Looks fantastic. Link to post Share on other sites
b1indsamurai Posted January 23, 2010 Report Share Posted January 23, 2010 ^^ the engraved sr25 receiver looks amazing Link to post Share on other sites
Fellowz Posted January 23, 2010 Report Share Posted January 23, 2010 is there any way of getting that SR15 reciever on its own with the Ambi cotrols or a conversion kit? Â i am trying to build a Chris Costa sr15 out of the the mechbox i already have here. Link to post Share on other sites
Recommended Posts