chas Posted June 8, 2010 Report Share Posted June 8, 2010 KAC PDW QD silencer, from Ebaybanned. http://www.ebairsoft.com/aabb-silencer-flash-hider-short-p-3230.html Link to post Share on other sites
uscmCorps Posted June 8, 2010 Report Share Posted June 8, 2010 So it comes with a regular KAC birdcage instead of a KAC TTB? Link to post Share on other sites
DrewLawson Posted June 8, 2010 Report Share Posted June 8, 2010 I got the long version of that silencer in last week. Beware: it has a lot of movement when its on (as in around the flash hider, very little wobble if any). Overall its pretty good replica. Foam filled. Link to post Share on other sites
jgarnreiter Posted June 10, 2010 Report Share Posted June 10, 2010 FINALLY have something worth posting in here. Sorry for the crappy photo. Anyway, I'm keeping this girl simple. MIGHT add a micro red dot, but this is pretty much what it'll be. Link to post Share on other sites
BrooklynBorn Posted June 10, 2010 Report Share Posted June 10, 2010 What store did you buy it from? I remember a couple pages back I brought up how the American stock photos sow the gas block protruding. Yet, when they were shipped, the gas block was not sticking out like that. Weird. Link to post Share on other sites
brimm2000 Posted June 11, 2010 Report Share Posted June 11, 2010 What store did you buy it from? I remember a couple pages back I brought up how the American stock photos sow the gas block protruding. Yet, when they were shipped, the gas block was not sticking out like that. Weird. I Think you may be talking about the pic i posted with the link to Nashville Airsoft where i bought my combat master. They where using a stock photo of the reqular VFC SR15 E3 with the 16 inch barrel, With the barrel extension taken of. For the Combat master. Link to post Share on other sites
jgarnreiter Posted June 11, 2010 Report Share Posted June 11, 2010 What store did you buy it from? I remember a couple pages back I brought up how the American stock photos sow the gas block protruding. Yet, when they were shipped, the gas block was not sticking out like that. Weird. Wow i didn't even notice. I bought it from Airsoft GI. I bought the 16 in, and just took off the barrel extension. I looked up pics to compare and realized what you're saying. That's pretty weird. Link to post Share on other sites
BrooklynBorn Posted June 11, 2010 Report Share Posted June 11, 2010 Wow i didn't even notice. I bought it from Airsoft GI. I bought the 16 in, and just took off the barrel extension. I looked up pics to compare and realized what you're saying. That's pretty weird. OOOOHHHHHH!! You bought the 16" Never mind then. That explains it. Link to post Share on other sites
jgarnreiter Posted June 11, 2010 Report Share Posted June 11, 2010 OOOOHHHHHH!! You bought the 16" Never mind then. That explains it. Now that I've noticed it, I really like the look of the gas block pushed out. Gives it a bit of personality Link to post Share on other sites
SuperJesus37 Posted June 13, 2010 Report Share Posted June 13, 2010 G&P with some after market stuffz. Link to post Share on other sites
Stealthbomber Posted June 13, 2010 Report Share Posted June 13, 2010 Lovely pic's but I tend to be more interested in the practical side of things so I was kinda wondering how you operate that pressure switch when you're holding onto the AFG? Link to post Share on other sites
BrooklynBorn Posted June 13, 2010 Report Share Posted June 13, 2010 Lovely pic's but I tend to be more interested in the practical side of things so I was kinda wondering how you operate that pressure switch when you're holding onto the AFG? If I may just speculate, I see 2 ways that could work. Put pressure on it with your wrist, or move the rail cover up a little bit. Link to post Share on other sites
fiddlesticks4220 Posted June 13, 2010 Report Share Posted June 13, 2010 Lovely pic's but I tend to be more interested in the practical side of things so I was kinda wondering how you operate that pressure switch when you're holding onto the AFG? He is a Jedi How is the VFC PEQ working for you? Link to post Share on other sites
lambolurker Posted June 16, 2010 Report Share Posted June 16, 2010 If I may just speculate, I see 2 ways that could work. Put pressure on it with your wrist, or move the rail cover up a little bit. I have big hands so wrist pressure works. Link to post Share on other sites
lambolurker Posted June 16, 2010 Report Share Posted June 16, 2010 He is a Jedi How is the VFC PEQ working for you? I really can't speak of it's reliability as I never skirmish my AEG. They are merely display items together with my RS. FYI: If you do get them, you may want to source out a RCR123 battery so you can get brighter illumination. It works with CR123 but not as bright. I hope that helps somehow. Link to post Share on other sites
Short Stack Posted June 17, 2010 Report Share Posted June 17, 2010 http://shop.ehobbyasia.com/aeg/vfc/vfc-sr15e3-iws-16inch-electric-airsoft-rifle.html If i were to buy that SR-15 from ehobbyasia, would it be possible to remove the barrel extension so it goes back to having a short barrel with a gas block potruding? Remember, specifically from ehobby. And, Would an internal barrel stick out from it? Link to post Share on other sites
Vercingetorix Posted June 17, 2010 Report Share Posted June 17, 2010 Yes on both accounts. I think the barrel is around 12in when you take off the extender, and all the space between the rail and the threads is taken up by the gas block. The stock barrel goes to the end of the normal 16" outer barrel, so you will see it sticking out quite a bit. Also, you need to shim the barrel to the outerbarrel if you take the extender off, as it is extremely loose/barely supported without the entered or a VFC FH sticking on the end of it. Link to post Share on other sites
jgarnreiter Posted June 17, 2010 Report Share Posted June 17, 2010 http://shop.ehobbyas...soft-rifle.html If i were to buy that SR-15 from ehobbyasia, would it be possible to remove the barrel extension so it goes back to having a short barrel with a gas block potruding? Remember, specifically from ehobby. And, Would an internal barrel stick out from it? I bought the same one and removed the barrel extension. Here's how it looks. I had my TBB cut down to fit (around 285 mm) Link to post Share on other sites
hayabusa46 Posted June 18, 2010 Report Share Posted June 18, 2010 http://www.ebairsoft.com/iron-airsoft-style-sr15-flash-hider-silver-p-3267.html Link to post Share on other sites
Titleist Posted June 18, 2010 Report Share Posted June 18, 2010 NOT cool...they used a photo of a friend of mine's real rifle. When is EBB going to knock that ###### off. Link to post Share on other sites
jgarnreiter Posted June 18, 2010 Report Share Posted June 18, 2010 NOT cool...they used a photo of a friend of mine's real rifle. When is EBB going to knock that ###### off. That's pretty f****d up Link to post Share on other sites
aznriptide859 Posted June 18, 2010 Report Share Posted June 18, 2010 Titleist you gonna contact them about it lol? Link to post Share on other sites
bbondaloose Posted June 18, 2010 Report Share Posted June 18, 2010 This isn't the first time they did it to Tit. Didn't they use YOUR picture once? Link to post Share on other sites
Shriven Posted June 18, 2010 Report Share Posted June 18, 2010 "play attention, the pic 3 is download from interest !!" Link to post Share on other sites
Recommended Posts