uscmCorps Posted September 6, 2010 Report Share Posted September 6, 2010 Are you sure that's the current URX II cut down? The original midlength URX didn't have an integrated flip up front sight and was shorter than the current URXII. I have one on my SR47: More here. Link to post Share on other sites
PianoBlack Posted September 7, 2010 Report Share Posted September 7, 2010 GB-Tech KAC 96251 Standalone Adapter with LMT M203 I'm currently awaiting a sextant sight for it. -Piano Link to post Share on other sites
ELBAR Posted September 8, 2010 Report Share Posted September 8, 2010 (edited) Are you sure that's the current URX II cut down? The original midlength URX didn't have an integrated flip up front sight and was shorter than the current URXII. I have one on my SR47: image More here. USMC the currest URX II has an extended rail on what would be the barrel nut . im going for a little bit of accuracy on a 5.56 the first pic shows the URXII style with the red arrow and the 2nd pic is the older style. the original URX is not what i was looking for i already saw that one on the sr-25 urx. IronWolf: Please don't quote pictures without removing the image tags, you can also use the report button to alert a member of staff to a post instead of double posting Edited September 8, 2010 by IronWolf Link to post Share on other sites
uscmCorps Posted September 13, 2010 Report Share Posted September 13, 2010 I lent my good photography lights to a friend for a photo shoot so I had to take these outdoors. Not the greatest pics, but they'll do for now. This is, what I believe, is the first (and so far only) KAC SR-25 EM-C. A close up of the modified gas block: Click either pic for much larger version. The base gun was an Ares XM110 SASS (long version). Very much inspired by Titleist's RS SR-25 EM-C. It took a while, but I'm pretty happy with the finished result. Kit list: • Ares XM110 SASS (modified externally) • Knight Armament Rear 600m BUIS • Knight Armament Rail Panels (stippled by BoreSight Solutions) • Knight Armament Micro Mount • Knight Armament Micro Battery Cover • Aimpoint T-1 Micro • CQD Sling mount (on the left side of URX rail) • Magpul ACS • Magpul 7.62 cover • Magpul Rail Ladders • Magpul AFG (stippled by BoreSight Solutions) • Magpul ASAP • RS Buffer Tube assembly modified to accept lipos • Magpul PTS MIAD • Magpul PTS Enhanced Trigger Guard • G-MIC PEQ-15 with Green laser • Andax PEQ15 Pattern Projector • Element Dual Switch • Element Surefire Scout with ACM LaRue Mount Still to do: • Gear Sector Scout Mount • Swap the Element Scout for my real Scout, and add a Surefire V-Series Head Link to post Share on other sites
PianoBlack Posted September 13, 2010 Report Share Posted September 13, 2010 Very nice, USCM. -Piano. Link to post Share on other sites
fiddlesticks4220 Posted September 13, 2010 Report Share Posted September 13, 2010 Link to post Share on other sites
validtumoralarm Posted September 15, 2010 Report Share Posted September 15, 2010 I can't believe I'm asking this...but is the RAS on the VFC E-Series a carbine URX? It looks like it but I'm not entirely sure, and it's driving me crazy. http://www.airsoftgi.com/product_info.php?cPath=139_24_142&products_id=5731 I really like the look of the KAC front flip-up and I was thinking of building something that includes that and a URX. This seems like a good value for a base, but if that's not a URX I think I'll just go G&P. Any input? Link to post Share on other sites
uscmCorps Posted September 15, 2010 Report Share Posted September 15, 2010 It is indeed the carbine URX. Link to post Share on other sites
validtumoralarm Posted September 15, 2010 Report Share Posted September 15, 2010 Ooh, good news. Thank you! But now the VFC HK416 has been re-released by Umarex for only $50 more than the E-Series...Guess I'll just get both! Link to post Share on other sites
Black Stena Posted September 15, 2010 Report Share Posted September 15, 2010 Outstanding job Corps! Link to post Share on other sites
tom lawson Posted September 15, 2010 Report Share Posted September 15, 2010 Sweet SR47 uscm! Link to post Share on other sites
Tariel Posted September 15, 2010 Report Share Posted September 15, 2010 (edited) Thought I would post my pride and joy. I think I'm one of the few or the only one in the world with a rifle like this (Front barrel assembly), I based this off a SR25 Match Light. Is all G&P except for the barrel set. Edited September 15, 2010 by Drake Link to post Share on other sites
Crocodilo Posted September 24, 2010 Report Share Posted September 24, 2010 Knight's Armament M249 RAS (G&P) Link to post Share on other sites
BigBabyMoses06 Posted September 26, 2010 Report Share Posted September 26, 2010 (edited) Bravo PDW. Just a CA 6.04 SS tight bore and a mad bull red bucking. Very impressive range and accuracy. Searching for a battery that will fit inside with the gas tubes removed, and might have the real trademarks engraved. On the way: -KAC hand stop -Dytac T-1 with KAC mount -Thinking about the AFG2, but will probably stick with a QD VFG. Edited September 26, 2010 by BigBabyMoses06 Link to post Share on other sites
sunburnthammer Posted September 27, 2010 Report Share Posted September 27, 2010 Dboys PDW... Link to post Share on other sites
usmc0621fro Posted September 27, 2010 Report Share Posted September 27, 2010 That EMAG actually makes the weapon incorrect. The real KAC PDW uses 6x35mm ammunition. The EMAG is for 5.56/.223. If you are going for accuracy this would be incorrect. Link to post Share on other sites
sunburnthammer Posted September 27, 2010 Report Share Posted September 27, 2010 That EMAG actually makes the weapon incorrect. The real KAC PDW uses 6x35mm ammunition. The EMAG is for 5.56/.223. If you are going for accuracy this would be incorrect. Hell No all about the looks! and you must admit it looks better with the emag Link to post Share on other sites
usmc0621fro Posted September 28, 2010 Report Share Posted September 28, 2010 I'm a realism guy, so for me it just looks wrong. Link to post Share on other sites
BigBabyMoses06 Posted September 28, 2010 Report Share Posted September 28, 2010 (edited) Some one told me the PDW round itself can be run with Pmags and other STANAG mags. Yay or Nay? Edited September 28, 2010 by BigBabyMoses06 Link to post Share on other sites
Vercingetorix Posted September 28, 2010 Report Share Posted September 28, 2010 (edited) Pretty sure thats a nay, as the round is pretty damn different. Maybe if there was some sort of follower replacement and a mag shell insert or something, but otherwise the round is to short from tip to primer if I am not mistaken, amongst other sizable differences.... Edited September 28, 2010 by Vercingetorix Link to post Share on other sites
usmc0621fro Posted September 28, 2010 Report Share Posted September 28, 2010 This is straight from Knight's Armament's website. See the difference in the rounds. Shorter and Smaller, but more powerful. This is why it wouldn't work in the gun, round is a completely different size. Link to post Share on other sites
Fellowz Posted September 30, 2010 Report Share Posted September 30, 2010 i really want an SR47 why dont anyone make the kits anymore! Link to post Share on other sites
hwagan Posted September 30, 2010 Report Share Posted September 30, 2010 http://www.landwarriorairsoft.com/acatalog/Custom_Work.html £400, fully built, including Eotech, hicap mag, and brand new. Dboy's V2 internals, but they can be replaced. Used to be £500, i'm amazed noone's bought that yet. Link to post Share on other sites
usmc0621fro Posted September 30, 2010 Report Share Posted September 30, 2010 That's so very wrong to taint that rifle with Dboys internals...It's like having a chance to sleep with Carmen Electra, I mean yeah she is hot, but think about what's been inside her. Same concept here. Link to post Share on other sites
Fellowz Posted September 30, 2010 Report Share Posted September 30, 2010 my site owner is selling his for £300 if its still there when my birthday arrives next week i may just have it, still the kit is over priced for what it is really, just suprised VFC havn't made one yet. Link to post Share on other sites
Recommended Posts