Ruse Posted May 29, 2010 Report Share Posted May 29, 2010 the arsenal at this moment: I've just got a question, where in belguim do you get your airsoft rifles or do you get them from a site if so wich site? thank you Link to post Share on other sites
hwagan Posted May 29, 2010 Report Share Posted May 29, 2010 Alright. If anything, I'd suggest moving the T1 to the forward mounting point to get a little more distance from your eye. Gets in the way of the QD lever if i have it further forward. Still, i usually mount it directly above the magwell; it's where i'm used to it and it helps with the balance. Anyhoo, here's another one - G&P M7A1. King Arms doesn't cut it build quality wise, from my experience of a few of their AEG's, so i built this from G&P parts.. Scar hider/silencer is now used on the MRP - M7 is back with the KX3 it came with, but i don't have a picture of it with it fitted ATM. Link to post Share on other sites
Amenthea Posted June 1, 2010 Report Share Posted June 1, 2010 My very battered and reliable TM M4. It fires 328 on the dot, and as its a plastic body its really light, in a good way. Excuse the poor quality of the pic, I was using the wifes hand me down camera. Link to post Share on other sites
Forze Posted June 6, 2010 Report Share Posted June 6, 2010 the arsenal at this moment: I've just got a question, where in belguim do you get your airsoft rifles or do you get them from a site if so wich site? thank you Hey Ruse, i usually buy at following stores: taiwangun.com (very good for china stuff; no import taxes) firesupport.co.uk (very good for parts & CA/G&P/TM aeg's / GBB's: no import taxes) www.uncompany.com / www.wgcshop.com (very good for everything: but with import taxes (and a lot of them: mostally 25%-45% taxes)) www.dentrinity.com (very good for rare & exotic stuff: but also with taxes same as the others) Link to post Share on other sites
BigBabyMoses06 Posted June 7, 2010 Report Share Posted June 7, 2010 KJW M700P Black Leapers 4-9x40mm Mil-Dot Scope w/sun shade 3x KJW mags (all with fresh o rings, sealed perfectly, stainless screws, dremmeled for high flow) Uncle Mike's quick adjust sling Madbull v2 650mm PSG-1 tightbore Nine Ball air seal chamber Tanaka 14mm CCW silencer adapter Dremmeled / polished bolt and air nozzle Lightened trigger springs, heavier sear spring Free float outer barrel Original boxes, manual, parts and accessories as well Shoots 250fps - 650fps w/ .3s (bolt is adjustable) on propane. Using .27 Biovals, its *****ing scary! :) Link to post Share on other sites
master_titled Posted June 7, 2010 Report Share Posted June 7, 2010 My very battered and reliable TM M4. It fires 328 on the dot, and as its a plastic body its really light, in a good way. Excuse the poor quality of the pic, I was using the wifes hand me down camera. http://i429.photobucket.com/albums/qq15/darkstar_010/Airsoft/DSCF1071.jpg Keep battering it! It'll look great when the paint keeps wearing down. Link to post Share on other sites
[-=O=-]^{Woozie} Posted June 7, 2010 Report Share Posted June 7, 2010 My HnK~ Link to post Share on other sites
Stangace Posted June 7, 2010 Report Share Posted June 7, 2010 Looks good. Any specific reason you cut off the handle? My friend actually did the same thing, I was just wondering what your motivation was. Link to post Share on other sites
[-=O=-]^{Woozie} Posted June 7, 2010 Report Share Posted June 7, 2010 I didn't cut it xD It's a CA Flat top rail with flip up front and rear sight Link to post Share on other sites
Stangace Posted June 7, 2010 Report Share Posted June 7, 2010 Wow, that would have made things easier for my friend Link to post Share on other sites
Lajjvo Posted June 7, 2010 Report Share Posted June 7, 2010 BigBabyMoses06: That M700 looks fantastic. But please, get a bigger suppressor. Link to post Share on other sites
BigBabyMoses06 Posted June 7, 2010 Report Share Posted June 7, 2010 LOL thanks! It was actually a Gemtech 9mm suppressor from the previous owner, that now sits nicely on my beat up KSC Glock 17 I think ill be leaving the rifle can-less untill i can find a decent 7.62 can. Any ideas? Link to post Share on other sites
CapaciousZepher Posted June 8, 2010 Report Share Posted June 8, 2010 L85A2 DMR. - Zepher Link to post Share on other sites
hwagan Posted June 8, 2010 Report Share Posted June 8, 2010 Oh. Hell. Yes. That's the hottest L85 i've ever seen - Really, really suits the DMR look, and i've never seen anything like it. +37. Link to post Share on other sites
Lajjvo Posted June 8, 2010 Report Share Posted June 8, 2010 My eyes! They bleed. Sorry Zepher, that thing looks horrific. Specially the tape on the suppressor and barrel. ICS is it? Link to post Share on other sites
hwagan Posted June 8, 2010 Report Share Posted June 8, 2010 Those 2 different opinions right there perfectly illustrate exactly why we're not all running around with Mp5k's and C-mags I reckon the tape would look better just shrouding the suppressor with the barrel exposed, but either way, i still think it looks the balls as well as being unique. Link to post Share on other sites
CapaciousZepher Posted June 8, 2010 Report Share Posted June 8, 2010 Haha, well thanks for both opinions guys I may have the cloth just cover the suppressor yet, I'm unsure. In the end it will be more effective in a camo sense to not have that black length of barrel showing between the OD handguard and camo covered suppressor. So we'll see. - Zepher Link to post Share on other sites
PianoBlack Posted June 9, 2010 Report Share Posted June 9, 2010 From Left to Right: TM MEU w/ NOVA MEU Metal Body and Slide KSC G34 w/ Boom Arms Shuey Custom Slide and Freedom Arts Sights KSC G18C w/ PGC G18 Metal Slide and Outer Barrel KWA G18C W/ PGC G18C Metal Slide and Outer Barrel 2x KSC G18 50 Round Magazines 2x Boxes of Speer Lawman 9mm Luger 2x TM MEU Magazines 7x KSC G17 Magazines 1x Insight M3 Flashlight. Enjoy, -Piano Link to post Share on other sites
BrooklynBorn Posted June 9, 2010 Report Share Posted June 9, 2010 Pianoblack- That is hawt. Looks like something straight out of a Bond movie. Few Q's tho. What case is that? How do you cut the foam? And why the RS ammo? Link to post Share on other sites
PianoBlack Posted June 9, 2010 Report Share Posted June 9, 2010 Thanks. The case is a Pelican 1550. The foam is 4 layers, egg crate on the lid, 2 layers of pull and pluck on top on a 1/2 inch layer on the bottom. The RS ammo boxes are actually empty boxes that I bought off eBay in order to store spare BBs, a gas adapter, and a speed loader in. I wanted something realistic that would look at home in the case. My only problem is now that I have 38 empty ammo boxes that I don't need that I'll probably end up selling as props for others. -Piano Link to post Share on other sites
Reincarnation... Posted June 9, 2010 Report Share Posted June 9, 2010 Paino, you should post that in this thread and bring the thread back to life. Nice job. Link to post Share on other sites
PianoBlack Posted June 9, 2010 Report Share Posted June 9, 2010 Reincarnation... Thanks, I was going to post there but due to the severe lack of posts (nearly a year), I wasn't sure if it was still current. There's still room for either another pistol or perhaps a silencer and threaded outer barrel in the case. The odd slot on the right side of the case is where I intend to keep a Pelican 1500 Desiccant. -Piano Link to post Share on other sites
sigma3 Posted June 12, 2010 Report Share Posted June 12, 2010 My new primary. Link to post Share on other sites
SteevoLS Posted June 12, 2010 Report Share Posted June 12, 2010 Looks great, Sigma! Here are my current primary rifles... one obligatory MagPul rifle, one MagPul-curious CQBR, and a distinctly different long-range rifle. The long rifle is a VFC M4 E-Series, and the CQBR is an AGM M16 I got in a trade a month or two back. ACM 1892 Winchester... chronos in the neighborhood of 600FPS with a .20, and routinely gets 250'+ kills. I'm pretty sure I've picked off a few guys from over 300' aswell, but I had no rangefinder on me at the time. Link to post Share on other sites
sigma3 Posted June 13, 2010 Report Share Posted June 13, 2010 Well, that's not something you see every day. Pretty interesting! I think you should weather that wood, though. Link to post Share on other sites
Recommended Posts