-Angel- Posted February 9, 2011 Report Share Posted February 9, 2011 What make/model do you use mate? I need to sort out batteries for my G&P. Link to post Share on other sites
hwagan Posted February 9, 2011 Report Share Posted February 9, 2011 (edited) What make/model do you use mate? I need to sort out batteries for my G&P. 7.4 800 or 1200's from Component shop in all of mine (And Jack's 'n all) - www.component-shop.co.uk I use the cheap £14 turnigy blue box charger, does the job fine, and a 7.4 1200 is an easy fit in the buffer tube. *edit* Lately i've been using the 7.4 1100's on CS - They're the size of a 7.4 800, and the only noticeable difference i can find is they're 15C discharge rather than 20C. They're also cheap enough to be considered a consumable. There's no noticeable delay in trigger response or ROF on any of my rifles though, i'd recommend them. For info's sake a G&P 8mm box with one of them gives about 1000-1100RPM with a nice quick trigger. Edited February 9, 2011 by hwagan Link to post Share on other sites
kingdong Posted February 9, 2011 Report Share Posted February 9, 2011 yes true that ^^, its quite suprising what ROF you can get from a 7.4v li-po. Link to post Share on other sites
FHairsoft1 Posted February 9, 2011 Report Share Posted February 9, 2011 thanks for the info hwagon! Link to post Share on other sites
BigBabyMoses06 Posted February 10, 2011 Report Share Posted February 10, 2011 Real steel troy, magpul, DD light mount, and surefire G2. Troy claymore comp, FDE MOE and trig guard, ASAP, and possibly some FDE TROY MBUS inbound. Base gun is a KWA SR12. Link to post Share on other sites
JSOFTER Posted February 10, 2011 Report Share Posted February 10, 2011 heres mine, sorry for the crappy quality, using phone camera, nikon is down =( Link to post Share on other sites
PianoBlack Posted February 10, 2011 Report Share Posted February 10, 2011 What length TRX is that, BBM? -Piano Link to post Share on other sites
BigBabyMoses06 Posted February 10, 2011 Report Share Posted February 10, 2011 15" Link to post Share on other sites
frogfish Posted February 10, 2011 Report Share Posted February 10, 2011 Troy makes a 15" TRX? That might be really good looking on my 16 inch barrel..... how much was it, $205, or closer to the 13" in price? Link to post Share on other sites
BigBabyMoses06 Posted February 10, 2011 Report Share Posted February 10, 2011 (edited) http://ar-15tactical.com/ Mine was 160. Cheapest ever. Troy is coming out with a newer version. Check out Nutnfancys 2011 shot show troy booth and the ar15.com brownells troy interview. Edited February 10, 2011 by BigBabyMoses06 Link to post Share on other sites
frogfish Posted February 10, 2011 Report Share Posted February 10, 2011 WOW....good prices, now the question is, one inch of barrel showing or 3 inches of barrel showing.. Link to post Share on other sites
scorch Posted February 10, 2011 Report Share Posted February 10, 2011 I really don't understand why no one makes a rail to rail adapter for airsoft. Am sure they do them in a choice of lengths at zero one... Link to post Share on other sites
BigBabyMoses06 Posted February 10, 2011 Report Share Posted February 10, 2011 WOW....good prices, now the question is, one inch of barrel showing or 3 inches of barrel showing.. Pics of the gun its going on? Link to post Share on other sites
frogfish Posted February 10, 2011 Report Share Posted February 10, 2011 It's RS so can't post them here. I'm going for the 13 inch, I have an 11 coming in for my KJW once that get's here I'll post pics. Link to post Share on other sites
TheFull9 Posted February 10, 2011 Report Share Posted February 10, 2011 Real steel troy, magpul, DD light mount, and surefire G2. Troy claymore comp, FDE MOE and trig guard, ASAP, and possibly some FDE TROY MBUS inbound. Base gun is a KWA SR12. Really nice stuff mate, looking forward to the finished article. Did the rail get on ok with the KWA barrel nut or did the RS one fit? Link to post Share on other sites
BigBabyMoses06 Posted February 10, 2011 Report Share Posted February 10, 2011 Thanks. The rail uses a proprietary barrel nut, which was quite hard to get on my KWA. It involved a vice, rubber mallet, the proprietary barrel nut-wrench they give, and a lot of hoping that nothing on the gun was going to break every time I hit the mallet lol. Installed the trigger guard last night. It keeps looking better and better. Link to post Share on other sites
mimesis Posted February 11, 2011 Report Share Posted February 11, 2011 I initially had problems installing a Mad Bull JP Rifles barrel nut on a SR-12. I removed all the paint on the KWA threads with a dremel wire brush, and then it went on a good deal more easily. Amazing the difference a coat of paint can make! Link to post Share on other sites
Delta_Knight Posted February 11, 2011 Report Share Posted February 11, 2011 '02 ICS M4A1 D-Boys RIS D-Boys An/Peq 2 Element LMT Stock Element Wilcox Mount G&P Aimpoint J&T Arms #40 BUIS Link to post Share on other sites
spence52490 Posted February 11, 2011 Author Report Share Posted February 11, 2011 Very classic. I like. Link to post Share on other sites
Delta_Knight Posted February 11, 2011 Report Share Posted February 11, 2011 Thanks Spence, I got left in 2008 when I missed the FDE Train Link to post Share on other sites
Eugene_Stoner Posted February 11, 2011 Report Share Posted February 11, 2011 (edited) Mk18 MOD1 Edited February 11, 2011 by Eugene_Stoner Link to post Share on other sites
-=OGGY=- Posted February 12, 2011 Report Share Posted February 12, 2011 (edited) Looks great! What PEQ-15 do you have on there? Edited February 12, 2011 by -=OGGY=- Link to post Share on other sites
Eugene_Stoner Posted February 12, 2011 Report Share Posted February 12, 2011 G&P AEG. ( wont bore you with internals) Unknown DD Rail, solid though. KAC Can CQD rear sling mount CQD front sling mount CQD VFG L3 Eotech 553 FDE Inisght Technology PEQ 15 FDE Insight Technology M3x FDE CQD 2 pointer Link to post Share on other sites
davedawg123 Posted February 12, 2011 Report Share Posted February 12, 2011 Any Viper/Inokatsu/Prime lower GBBR owners have success installing an ACM (not PTS) UBR? Link to post Share on other sites
jesTer Posted February 12, 2011 Report Share Posted February 12, 2011 (edited) Played around with some new accessories I have (Was this gun) A shot with the KAC-style Triple Tap Brake Edited February 12, 2011 by jesTer Link to post Share on other sites
Recommended Posts