hitmanNo2 Posted February 12, 2011 Report Share Posted February 12, 2011 Any Viper/Inokatsu/Prime lower GBBR owners have success installing an ACM (not PTS) UBR? I have one on an Iron Airsoft Larue build which is Prime sized. The buffer tube screws on fine. You just need to get a longer screw to go through the butt of the stock into the buffer tube. But this is a problem whatever you install the UBR on. Link to post Share on other sites
Erik_MAA Posted February 12, 2011 Report Share Posted February 12, 2011 Gun on top is my real steel, on the bottom its Airsoft twin. TRX is from ACM. It required a little bit of fitting but not too much trouble. Link to post Share on other sites
BigBabyMoses06 Posted February 12, 2011 Report Share Posted February 12, 2011 <3 Link to post Share on other sites
aznriptide859 Posted February 12, 2011 Report Share Posted February 12, 2011 Looks like TROY is retaking over the AR scene here XD. Link to post Share on other sites
the roob Posted February 12, 2011 Report Share Posted February 12, 2011 jester - looks ALOT better IMO. Link to post Share on other sites
frogfish Posted February 12, 2011 Report Share Posted February 12, 2011 Looks like TROY is retaking over the AR scene here XD. Cheap + light + quality= win Erik, I have almost the exact same parts on the way for both RS and AS, except I've got a 14.5 in AS and 11" TRX and a 16 inch RS and a 13" trx.... Although I do have a BC 1.5 instead the flash hider you have. Link to post Share on other sites
boomheadshot (infidel) Posted February 12, 2011 Report Share Posted February 12, 2011 Roll on the VTAC Extreme version and im gunna be all over it. Link to post Share on other sites
validtumoralarm Posted February 13, 2011 Report Share Posted February 13, 2011 Here's my G&P WOC GBBR External: G&P WOC SR15E3 body G&P SR15 URX Med Rail Magpul MIAD grip Magpul XTM rail covers KAC TTB Magpul PTS ACS stock King Arms Leupold Mark IV CQ/T Internal: 1st and 2nd BCG's - 5KU aluminum NPAS nozzle w/ interchangable tip (in G&P BC) 3rd BCG - JG ABS nozzle w/ brass tip (in JG BC) Also have two extra loading nozzles, one original G&P and not sure on make of the other. AABB PRI charging handle AABB Speed buffer and hard recoil buffer spring 5KU 130% hammer spring WA Super mag, 3x leak free GHK mags and one JG leak free mag. Link to post Share on other sites
BIGBC Posted February 13, 2011 Report Share Posted February 13, 2011 Link to post Share on other sites
Whitehawk Posted February 13, 2011 Report Share Posted February 13, 2011 Greenside M4a1 + M203 Link to post Share on other sites
[k44] Obi Wahn Posted February 13, 2011 Report Share Posted February 13, 2011 Link to post Share on other sites
Roecar Posted February 13, 2011 Report Share Posted February 13, 2011 Here are the latest incarnations of my N4 custom and M16 DMR. I decided to try my hand at weapon painting although I haven't decided as of yet if I want to paint the whole gun. Link to post Share on other sites
TheFull9 Posted February 13, 2011 Report Share Posted February 13, 2011 Sexyliscious. Gotta love those SCAR panels. Link to post Share on other sites
MRF Posted February 14, 2011 Report Share Posted February 14, 2011 (edited) Heh, polymer light mounted on barrel . Please, cut a c...p. Edit: Please forgive me and delete this. Sometimes I just can't stand this kind approach to others... Edited February 14, 2011 by MRF Link to post Share on other sites
[NL]Infinity Posted February 14, 2011 Report Share Posted February 14, 2011 More scar panels! Forgot to put the peq and m3 on there unfortunately: Link to post Share on other sites
Blindside Posted February 15, 2011 Report Share Posted February 15, 2011 New M4 set up(s), swappable uppers is pretty handy I've decided. Link to post Share on other sites
Nasty_TheYankWelshOne Posted February 15, 2011 Report Share Posted February 15, 2011 Blindside, is that an ICS? Link to post Share on other sites
[NL]Infinity Posted February 15, 2011 Report Share Posted February 15, 2011 Judging from the lack of lugs on the rear-end of the upper it is probably some other brand ;-) VFC & G&P maybe? Link to post Share on other sites
grzechotnik Posted February 15, 2011 Report Share Posted February 15, 2011 [NL]Infinity - Where did You get those panels? Cheers! Link to post Share on other sites
Blindside Posted February 15, 2011 Report Share Posted February 15, 2011 The lower and upper on the CQBR are G&P, the upper on the M4 upper is a modded Systema (non-PTW) body. Link to post Share on other sites
[NL]Infinity Posted February 15, 2011 Report Share Posted February 15, 2011 (edited) Didn't know systema made receivers, but I guess one can always learn @grzechotnik: They're ACM replica's of tangodown panels a.k.a. the "SCAR panels", they come as a set of 1 long and one short panel, either in black or FDE. I bought them secondhand, but I think the previous owner got 'em off EBB (?) Pic thread: KISS M4A1, normally sits on another lower, which I'm working on "atm" (not literally speaking since I live in the *albatroth* netherlands Edited February 15, 2011 by [NL]Infinity Link to post Share on other sites
Blindside Posted February 15, 2011 Report Share Posted February 15, 2011 Its an old body, before Systema even made PTWs from what I remember. I remember seeing them back in like 05 and around then. I got it semi recently with a gun I bought, and the lower broke in transit. Fixed it with some glue and it held up for awhile, then broke again. Decided to just scrap it and use the upper. A whole bunch of filing of the rear pin tabs and a long piece of metal that ran along the side and I made it to fit on the G&P lower. Only a slight gap between the rear curve part of the upper and the lower that's hardly noticeable. Link to post Share on other sites
RasmusDS Posted February 16, 2011 Report Share Posted February 16, 2011 [NL]Infinity - Where did You get those panels? Cheers! http://www.ebairsoft.com/style-rough-rail-cover-black-p-3262.html Link to post Share on other sites
spetsnazdave87 Posted February 16, 2011 Report Share Posted February 16, 2011 Kicking it old school... Diemaco C8/A1. Sorry for the shocking photo quality. Still waiting to find a G&P trigger guard too, metal body didn't come with one :/ Combined a M653 upper with a C8A1 lower. I realise it's not technically 'original C8 accurate' but there are ref pics of JTF 2 still using A1-style uppers on carbines in Iraq fairly currently so I'm not too bothered given Diemaco's trend for mixing and matching receivers... best I could do anyways Pistol grip is supposed to be an A2, need to change that as well, but it's still very much a WIP. Opticswise I'm putting a Colt 4x20 carry handle scope on there until I can source a fairly reasonably priced aimpoint M2 setup with the correct mount (don't want to shell out another £90 for another correct guarder one), or a carry-handle mounted iron-sighted ACOG. Link to post Share on other sites
Lax Posted February 18, 2011 Report Share Posted February 18, 2011 My first finished upper Link to post Share on other sites
Recommended Posts