spence52490 Posted November 23, 2010 Author Report Share Posted November 23, 2010 KWA SPR Mod 0, started life as a KWA SR-7. Kit has been since uninstalled, shot like ###### once I put a M120 and the longer barrel in it. I think poor compression seems to be the problem, but It was nice to look at. Link to post Share on other sites
uba Posted November 23, 2010 Report Share Posted November 23, 2010 incredible rifles here... please, can someone point me in the right direction where i can buy a magazine holder like the one in this picture? G&p makes a decent readymag replica. I bought one from ehobby not too long ago. Yup, that´s a G&P´s ready mag, bought it from Ehobbyasia. It´s a bit loose so at least those Pmags rattle in it. But some tape should fix it. Link to post Share on other sites
mugur Posted November 23, 2010 Report Share Posted November 23, 2010 randominterupt, do you remember where you bought yours? Link to post Share on other sites
uba Posted November 23, 2010 Report Share Posted November 23, 2010 (edited) Again: G&p makes a decent readymag replica. I bought one from ehobby not too long ago. Here ya go: http://shop.ehobbyasia.com/gandp-ready-mag-system-for-m4-m16-series.html Enjoy your shopping! Edited November 23, 2010 by uba Link to post Share on other sites
hayabusa46 Posted November 23, 2010 Report Share Posted November 23, 2010 Here you go mugur, http://shop.ehobbyasia.com/gandp-ready-mag-system-for-m4-m16-series.html Link to post Share on other sites
league 4 Posted November 24, 2010 Report Share Posted November 24, 2010 G&P XM110 with 4 midcaps and 2 hicaps, along with a G&P ACOG with Doctor sight are new. Link to post Share on other sites
Noveske Posted November 24, 2010 Report Share Posted November 24, 2010 G&P XM110 with 4 midcaps and 2 hicaps, along with a G&P ACOG with Doctor sight are new. Nice! Don't see those too often! Link to post Share on other sites
spence52490 Posted November 24, 2010 Author Report Share Posted November 24, 2010 M3 for that XM110 plzzz. Link to post Share on other sites
kojak Posted November 24, 2010 Report Share Posted November 24, 2010 Kojak- after seeing your old CASV/DMR build, I never expected a Block 2 look, but DAYUM. That is gorgeous. 3 stick lipo for the RIS? Thanks! It's a two stick, and I even had to file down the Deans connector to get everything in there. Link to post Share on other sites
Eizen Posted November 24, 2010 Report Share Posted November 24, 2010 Perfect! Link to post Share on other sites
aznriptide859 Posted November 24, 2010 Report Share Posted November 24, 2010 That's beautiful Kojak. Link to post Share on other sites
Rogue845 Posted November 24, 2010 Report Share Posted November 24, 2010 Kojak........PLEASE tell me what that rail is and where I can get one - it's exactly what I'm looking for! Link to post Share on other sites
TeowneD Posted November 24, 2010 Report Share Posted November 24, 2010 its a daniel defense MK18 RIS II 9.5" i have a black one made by element Link to post Share on other sites
tangloppen Posted November 24, 2010 Report Share Posted November 24, 2010 (edited) Looks like a DD M4a1 RIS II. Real SpecterDR? Beautiful build... Edited November 24, 2010 by tangloppen Link to post Share on other sites
TeowneD Posted November 24, 2010 Report Share Posted November 24, 2010 It's a Echo1 platinum edition m4 (bascally a VFC m4a1 with echo trades) magpulized with the following internal bits: -Madbull 363mm, 6.03mm Tightbore -Madbull Silicone hop-up Bucking -Madbull hop-up h-Nub using a King arms buffer tube lipo Link to post Share on other sites
Noveske Posted November 25, 2010 Report Share Posted November 25, 2010 Thanks! It's a two stick, and I even had to file down the Deans connector to get everything in there. Very nice Kojak. Link to post Share on other sites
SuperJesus37 Posted November 25, 2010 Report Share Posted November 25, 2010 Gotta touch up the barrel and bipod, but I'm outta paint and wally world is closed. I need to get a new pistol grip, new gearset and motor, cut the lower, make tray to hold MK46 mag, build feed tray off side of upper, and rewire it. Still need to get sling points on it, as well as a recoil control stock with a new muzzle break. Heading to Army-Barracks on Friday to get them! Link to post Share on other sites
RacingManiac Posted November 26, 2010 Report Share Posted November 26, 2010 Yeah the Larue SBR shoots....sorry for the crappy vid though....phone camera was all I got to work with video wise... Link to post Share on other sites
TheFull9 Posted November 26, 2010 Report Share Posted November 26, 2010 Nice one, looks like it's got a fair bit of recoil going on there. Link to post Share on other sites
Eizen Posted November 26, 2010 Report Share Posted November 26, 2010 (edited) Need to fix that flashider. Edited November 26, 2010 by Eizen Link to post Share on other sites
Artigo Posted November 27, 2010 Report Share Posted November 27, 2010 Will the DD RIS II rail fit on a TM M4A1 ? Link to post Share on other sites
Noveske Posted November 27, 2010 Report Share Posted November 27, 2010 Will the DD RIS II rail fit on a TM M4A1 ? The TM AEG or EBB? From what I recall for the AEG, NO, not worth the modifications. I believe the D-ring position on the TM receiver is a bit different. But it has been years since I touched a TM M4. Link to post Share on other sites
Artigo Posted November 27, 2010 Report Share Posted November 27, 2010 The TM AEG or EBB? From what I recall for the AEG, NO, not worth the modifications. I believe the D-ring position on the TM receiver is a bit different. But it has been years since I touched a TM M4. The AEG. I've had it for years and only recently gotten back into airsoft. So much is different since when I last played 6 years ago or so lol I was hoping my TM might still be able to use the new stuff out there. If you're telling me it's not worth it.. shucks. What is a good priced one of the market? Or, what are the common rifles here in this thread? I'm liking pretty much all of these here. Link to post Share on other sites
TeowneD Posted November 27, 2010 Report Share Posted November 27, 2010 there are too many styles of ARs too recommend, i suggest you choose a style, buy a base gun and work on it. G&P, KWA AEGs will do great as a base gun if you want some good reliability and out of the box performance. @RacingManiac, the GBBR looks sweet! BTW-what TV channel are you watching? i heard "riflescopes" and "camo jackets" somewhere in the audio Link to post Share on other sites
RacingManiac Posted November 27, 2010 Report Share Posted November 27, 2010 I don't actually remember...lol Link to post Share on other sites
Recommended Posts