Probotector Posted September 20, 2016 Report Share Posted September 20, 2016 VFC SCAR-H - ACM VLTOR CASV Handguard - ACM MOE Pistol Grip - Magpul AFG - Element Eotech 553 - Super legit stickers n stuff - Two-tone (May spraypaint the stock aswell but I'd rather have an even mix of colours) Sorry for the potato quality but my camera is broken. 4 Quote Link to post Share on other sites
Murdoc Posted November 29, 2016 Report Share Posted November 29, 2016 Hi; do RS top covers fit on L1A1/FAL AEGs??? I think no, because the receiver is too wide... I definetly think about CA SA58. Thanx! Quote Link to post Share on other sites
mightyjebus Posted December 25, 2016 Report Share Posted December 25, 2016 Merry Christmas. I managed to escape the madness in my house for 30 mins to fit the wooden SLR furniture I told the other half to get me for xmas. This has been fitted to the original Star SLR and not the newer version and fitted without any issues. 6 Quote Link to post Share on other sites
druid799 Posted December 26, 2016 Report Share Posted December 26, 2016 'Jebus I saw this and did a man wee ! THAT is a gun you form a circle around and chant " we're not worthy!" Beautiful piece of work good sir ! Quote Link to post Share on other sites
Lone_Bullet Posted December 26, 2016 Report Share Posted December 26, 2016 It's wonderful, I just miss some wear... some character, right? But hey, that's just my opinion. You must be very proud ^^ Quote Link to post Share on other sites
mightyjebus Posted December 26, 2016 Report Share Posted December 26, 2016 cheers for the comments. I was in the process of finding some real furniture when I heard ARES would release the wood as a separate kit so after acquiring a real worn carry handle I stopped looking for real stocks (rocking horse pooh) and foregrips. To be honest I quite like the fresh from factory look and I've actually got the ARES full auto selector to fit at some point. Quote Link to post Share on other sites
druid799 Posted December 26, 2016 Report Share Posted December 26, 2016 (edited) I'm a bit of an 'odd bod' (no comments from my team mates !) in that I like the weathered gun look , but absolutely detest the 'Afgan' look and the like , we're they've smothered the gun in paint then vigorously gone at it with wire wool ,etc,etc . I DO really like your fresh from the factory look , back in the day when I was a 'wee lad' all wide eyed and excited at my first issue rifle we actually tried to keep our SLRs as pristine as possible we'd spend ours oiling the wood and re-blueing the metal work to keep this look . So more than acceptable in my eyes my friend ! Edited December 26, 2016 by druid799 1 Quote Link to post Share on other sites
Lone_Bullet Posted December 26, 2016 Report Share Posted December 26, 2016 Same idea here bud! I like the look of an old and worn but cared for and treasured rifle. It's because of a post apocalyptic idea of mine. Imagine doing years with one rifle in a world gone bad. You'd trust it with your life and treasure it. You share a lot of memories. You take care of the rifle and it will take care of you. This kind of idea. 1 Quote Link to post Share on other sites
renegadecow Posted January 10, 2017 Report Share Posted January 10, 2017 Only now got around to printing these. Excellent work by PAPAGO and Rustork! 2 Quote Link to post Share on other sites
Pdubyuh Posted January 10, 2017 Report Share Posted January 10, 2017 pah I prefered the "skittles" Quote Link to post Share on other sites
renegadecow Posted January 11, 2017 Report Share Posted January 11, 2017 Spongebob was fine while it lasted. I still have one mag left blank and I have half a mind to print something like this in its stead. 2 Quote Link to post Share on other sites
TheFull9 Posted January 12, 2017 Report Share Posted January 12, 2017 I'm sure there are much better/funnier options than I could ever concoct, but (that's the WE GBB right?) I think just a picture of a ton of BBs would mess with a lot of people's heads. 1 Quote Link to post Share on other sites
Katotaka Posted January 13, 2017 Report Share Posted January 13, 2017 ^ That's so bad of an idea, to a level of becoming awesome. Quote Link to post Share on other sites
titchikov Posted January 15, 2017 Report Share Posted January 15, 2017 Or paintballs... Quote Link to post Share on other sites
Lone_Bullet Posted January 15, 2017 Report Share Posted January 15, 2017 Viagra or powerful Anti-depressants Quote Link to post Share on other sites
druid799 Posted January 23, 2017 Report Share Posted January 23, 2017 AND the latest 7.62 I've acquired ! Definitely going away from the 'uber leet' racing M4 type guns and going back to big lumps of guns . Jing Gong DSA58 with a compM4 scope / BE Meyers 5.56 flash hider (correct sized 7.62 on its way) and a short ris rail fitted to take the foregrip. Hope you like ; 3 Quote Link to post Share on other sites
bladerunner168 Posted February 5, 2017 Report Share Posted February 5, 2017 Been a couple of years, rejoined the SCAR club, Tokyo Marui. Took the front sight off and put on a set of offset BUIS, very usable and well balanced. 4 Quote Link to post Share on other sites
chas Posted March 15, 2017 Report Share Posted March 15, 2017 Does anyone know whether a Masada stock will fit on a Dboys/VFC SCAR? I want to build something like this: https://kineticdg.com/wp-content/uploads/2015/03/KDG-ACRdemo_07SMALL.jpg Quote Link to post Share on other sites
DeltaZero Posted March 15, 2017 Report Share Posted March 15, 2017 Didn't angry gun make an adaptor to let you use Masada stocks? Not sure if it's compatible with the DBOY/VFC model though. Sent from my iPhone using Tapatalk Quote Link to post Share on other sites
TheFull9 Posted March 15, 2017 Report Share Posted March 15, 2017 Kinetic Dev Group make adapter pieces (expensive ones) to allow ACR stocks to work on SCARs. Only way I know to do it in airsoft is with the above mentioned, which I believe is only for WE GBBRs. Quote Link to post Share on other sites
hitmanNo2 Posted March 15, 2017 Report Share Posted March 15, 2017 And pretty much OOS everywhere. Annoying thing about AG products that. Quote Link to post Share on other sites
TheFull9 Posted March 15, 2017 Report Share Posted March 15, 2017 All the good, interesting little bits like that always are; especially parts that adapt one thing to another. They almost always make them in tiny runs, either one-off or with years long gaps. Some Laylax externals for Marui ARs that I like have been OOS everywhere I've looked for literally 2+ years. Quote Link to post Share on other sites
Katotaka Posted March 16, 2017 Report Share Posted March 16, 2017 Mine IIRC WE SCAR receiver's dimensions are cloned from VFC AEGs...... So I'm pretty confident that will fit. AG's later products like Gen 2 AR stock adapter even says it fits WE GBB / VFC AEG, while you'll need to re-wire battery input. 2 Quote Link to post Share on other sites
TheFull9 Posted March 16, 2017 Report Share Posted March 16, 2017 Glad I'm not the only one with a loop of green paracord through the rear sling loops on my SCAR-L either. Quote Link to post Share on other sites
Katotaka Posted March 17, 2017 Report Share Posted March 17, 2017 The loop was for attaching few single point slings, tried a few of them, didn't like the way the gun swings, tried quick-adjustable 2-point and never looked back. The knot is this kind, PITA to make and I just don't bother to remove. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.