M14 Picture Thread

[jester401]

Some really nice m14s in this thread, nice job guys!

 

Finally finished my beauty so i figured i would take pictures and share them with you! tell me what you think.

OH! please ignore the messy work bench

 

I usallly run it without the silencer.

[tmas]

Looks nice. The silencer makes it look like you're compensating for something...

[Cyber Soldier]

AllInBlack:

http://img.photobucket.com/albums/v232/don...arsoftheSun.jpg

Where is that? It's stunning.

[Jagdraben]

<img snip>

<{POST_SNAPBACK}>

 

What outer and inner barrels did you use for that? Is the outer a 390 or a 412?

 

AllInBlack:

http://img.photobucket.com/albums/v232/don...arsoftheSun.jpg

Where is that? It's stunning.

<{POST_SNAPBACK}>

 

I believe that would be Hollywood, from the set of Tears of the Sun.

Edited December 6, 2006 by Jagdraben

[Spartan XV]

M21 is far right, with Silk.

Edited December 6, 2006 by Spartan XV

[BoB SoiL]

AllInBlack:

http://img.photobucket.com/albums/v232/don...arsoftheSun.jpg

Where is that? It's stunning.

<{POST_SNAPBACK}>

 

 

No offence intended mind

 

That would be where they filmed part of the film Tears of the Sun (what with those blokes being the cast of said film )

 

 

[AllInBlack]

AllInBlack:

http://img.photobucket.com/albums/v232/don...arsoftheSun.jpg

Where is that? It's stunning.

<{POST_SNAPBACK}>

 

 

Umm.. Hawaii I think? Thats where it was filmed It's off Tears of the Sun. If you haven't seen it then I urge you to go and find it and watch it because it is an amazing film with a kickarse village assault with silenced pistols.. Awesome. But no-ones confirmed what gun the guy on the far right has got cos I'm not sure.. M14 or M21?

 

Jester401 - I like the silenced look on your gun! What silencer is it? I want to stick my silencer on but I'm scared I'll twat it against a tree.

[NegativeCambre]

Umm.. Hawaii I think? Thats where it was filmed It's off Tears of the Sun. If you haven't seen it then I urge you to go and find it and watch it because it is an amazing film with a kickarse village assault with silenced pistols.. Awesome. But no-ones confirmed what gun the guy on the far right has got cos I'm not sure.. M14 or M21?

 

Jester401 - I like the silenced look on your gun! What silencer is it? I want to stick my silencer on but I'm scared I'll twat it against a tree.

<{POST_SNAPBACK}>

 

Yeah, looks like Hawaii, probably Kawaii--Kipu Ranch. Where they film a lot of non-discript latin american films. (Jurasic Part, the Rundown, Raiders of the Lost Arc (beginning scenes, anyways) etc.)

 

Steve

[Yeager]

Yeah, looks like Hawaii, probably Kawaii--Kipu Ranch.  Where they film a lot of non-discript latin american films.  (Jurasic Park, the Rundown, Raiders of the Lost Arc (beginning scenes, anyways) etc.)

 

Steve

<{POST_SNAPBACK}>

 

 

Um...Grant, they're flocking this way..

 

 

God, that was the first thing I thought of when I saw that field..

[AllInBlack]

M21 is far right, with Silk.

<{POST_SNAPBACK}>

 

 

Thankyou

[Mr6]

Thankyou 

<{POST_SNAPBACK}>

 

If you don't know your M14 from your M21, this site will be of use http://www.fas.org/man/dod-101/sys/land/m14.htm

[RaboonTheBaboon]

AllInBlack I told you that you numpty!

 

(incase you all think i'm being offensive, the guy's a good friend)

Edited December 7, 2006 by RaboonTheBaboon

[sturgis]

was wondering, if any of you guys with TM M14s out, could measure the diameter of the outer barrel?

i have a Kart M14, i would like to tinker with, and am wondering if the outer barrel is the same as a TM

 

also, are M14 tightbores the same as any other AEGs tightbores? because i still have a M16 ones lying around that might be long enough for my needs

Edited December 10, 2006 by sturgis

[tmas]

was wondering, if any of you guys with TM M14s out, could measure the diameter of the outer barrel?

i have a Kart M14, i would like to tinker with, and am wondering if the outer barrel is the same as a TM

 

also, are M14 tightbores the same as any other AEGs tightbores? because i still have a M16 ones lying around that might be long enough for my needs

<{POST_SNAPBACK}>

 

M16 tightbores won't work in Marui M14's. As for these new Kart things... I have no idea.

[sturgis]

M16 tightbores won't work in Marui M14's. As for these new Kart things... I have no idea.

<{POST_SNAPBACK}>

roger that, most of the Tm will fit the kart apperently, i just need the diameter of a TM outer barrel, so i can compare it with mine

[sturgis]

anyone?

also, can some one check their manual and tell me what the partnumber is on the part i outlined on, winzero's picture?

 

Edited December 10, 2006 by sturgis

[UrPeaceKeeper]

anyone?

also, can some one check their manual and tell me what the partnumber is on the part i outlined on, winzero's picture?

 

<{POST_SNAPBACK}>

 

Well its either the Stock, (yes, the stock has a lip on it for the front metal parts to sit on like the real M14) or its the Gas Buffer Tube/Gas Block... what part number it is, thats a good question, I dont have my TM Manual off hand to tell you

[tmas]

On Tuesday I'll be able to tell you...

[sturgis]

Well its either the Stock, (yes, the stock has a lip on it for the front metal parts to sit on like the real M14)  or its the Gas Buffer Tube/Gas Block... what part number it is, thats a good question, I dont have my TM Manual off hand to tell you

<{POST_SNAPBACK}>

they should be two clips to cover that metal lip on the stock, does that metal lip come off btw??

[UrPeaceKeeper]

they should be two clips to cover that metal lip on the stock, does that metal lip come off btw??

<{POST_SNAPBACK}>

well if you pull the stock out the metal part that is attacehd to the Gasblock (The end cap is the best way to describe it... i just woke up sorry ) Does it come off? IIRC it can come off but why? I know on my wood stock and hte real fiberglass stock there was just that lip there... lemme dig out my manual that i made .jpgs of right after i got my M14.....

 

Alrighty looks like part M14-34 is the gas block end cap thingy... the metal lip on the stock is m14-43

 

manual d/l link

Edited December 11, 2006 by UrPeaceKeeper

[sturgis]

well if you pull the stock out the metal part that is attacehd to the Gasblock (The end cap is the best way to describe it... i just woke up sorry )  Does it come off?  IIRC it can come off but why?  I know on my wood stock and hte real fiberglass stock there was just that lip there... lemme dig out my manual that i made .jpgs of right after i got my M14.....

 

Alrighty looks like part M14-34 is the gas block end cap thingy... the metal lip on the stock is m14-43

 

manual d/l link

<{POST_SNAPBACK}>

cheers man ! that helped alot ! apperently the steel ring is what is used to cover up the cut of the stock.

have a +1!

 

if you could find some time to measure the outer barrem diameter aswell, that would be ace !

[youth in asia]

can anyone suggest a 3-point sling for an M14 (specifically the SOCOM/SOC16)? i've been looking at the ones for the M16, and they look like they would work, but i just wanna make sure. thanks.

[gafes]

can anyone suggest a 3-point sling for an M14 (specifically the SOCOM/SOC16)? i've been looking at the ones for the M16, and they look like they would work, but i just wanna make sure. thanks.

<{POST_SNAPBACK}>

 

airsoftgi has the specter 3 point sling. I have one in my m14 and it works wonderful.

 

link-> http://www.airsoftgi.com/product_info.php?...products_id=975

Edited December 12, 2006 by gafes

[youth in asia]

thanks, buddy. +1

[sturgis]

c'mon guys, someone must have one of these

to measure a TM M14 outer barrel

 

I really need to know this, so i can order my stuff...