Tef Posted January 22, 2006 Report Share Posted January 22, 2006 I'm using the extended M16A2 km tn barrel, modified the notches to fit in the new M14 hopup, runs 550mm. So 50mm longer than the stock M14 barrel, can't say anything over 500mm is gonna really add anything to the accuracy. <{POST_SNAPBACK}> i was more thinking adding a little fps to my m14 using TN, it;s 300fps at the moment, and adding a slight longer barrel may bring it to 310 may be 320 so i dont need to stress the internal by putting a stronger spring in it Link to post Share on other sites
robb Posted January 22, 2006 Report Share Posted January 22, 2006 sorry guys this just had to done ....pure sex ;-) http://img159.imageshack.us/img159/5292/dscf00961np.jpg Link to post Share on other sites
Titleist Posted January 22, 2006 Report Share Posted January 22, 2006 i was more thinking adding a little fps to my m14 using TN, it;s 300fps at the moment, and adding a slight longer barrel may bring it to 310 may be 320 so i dont need to stress the internal by putting a stronger spring in it <{POST_SNAPBACK}> From my experience you'll see 10fps gain at the mos, mine went from 310 to 320, that's it. Link to post Share on other sites
Tef Posted January 22, 2006 Report Share Posted January 22, 2006 From my experience you'll see 10fps gain at the mos, mine went from 310 to 320, that's it. <{POST_SNAPBACK}> yea, UK limit is 325fps, so i dont need it ot go up by alot just a little bit will do. Link to post Share on other sites
Wehrmacht54 Posted January 23, 2006 Report Share Posted January 23, 2006 You guys suck. You just made me buy an OD M14. Guess im part of the "brotherhood" now? Link to post Share on other sites
FUmiYAsu Posted January 23, 2006 Report Share Posted January 23, 2006 You guys suck. You just made me buy an OD M14. Guess im part of the "brotherhood" now? <{POST_SNAPBACK}> originally it was only for m14 owners but i am not sure what the rule is now.... Link to post Share on other sites
UrPeaceKeeper Posted January 24, 2006 Report Share Posted January 24, 2006 originally it was only for m14 owners but i am not sure what the rule is now.... <{POST_SNAPBACK}> If you plan to buy one like in the next few weeks you'll be a member... or yours has been shipped and waiting or you own one Sorry man, just gotta fork over the money to become the member (the money for the gun that is ) Link to post Share on other sites
Wehrmacht54 Posted January 24, 2006 Report Share Posted January 24, 2006 If you plan to buy one like in the next few weeks you'll be a member... or yours has been shipped and waiting or you own one Sorry man, just gotta fork over the money to become the member (the money for the gun that is ) <{POST_SNAPBACK}> Dont worry Redwolf is packaging it as we speak. I'll post pics when it arrives. Link to post Share on other sites
UrPeaceKeeper Posted January 24, 2006 Report Share Posted January 24, 2006 Dont worry Redwolf is packaging it as we speak. I'll post pics when it arrives. <{POST_SNAPBACK}> Welcome on board then Haha get it, Arnies Airsoft Message BOARDS? haha welcome on board... GAH fine... Link to post Share on other sites
Titleist Posted January 24, 2006 Report Share Posted January 24, 2006 anymore bad jokes Ur and I'll take your bad joke license away from ya. Link to post Share on other sites
Donut Posted January 24, 2006 Report Share Posted January 24, 2006 Hey, anyone got any experience with the G&G M14? How durable/reliable is it stock? thanks. Link to post Share on other sites
Tef Posted January 24, 2006 Report Share Posted January 24, 2006 Hey, anyone got any experience with the G&G M14? How durable/reliable is it stock? thanks. <{POST_SNAPBACK}> they have better finishing, but not as many spare parts so not a very good field use AEG Link to post Share on other sites
vietnammarine Posted January 24, 2006 Report Share Posted January 24, 2006 I think, it´s time for another M14 picture. My old but damn reliable ASC M14 with two of six magazines. I plan to buy TM or G&G M14 but when I finally find out which one of them has the correct paramatres. Link to post Share on other sites
UrPeaceKeeper Posted January 24, 2006 Report Share Posted January 24, 2006 I think, it´s time for another M14 picture. My old but damn reliable ASC M14 with two of six magazines. I plan to buy TM or G&G M14 but when I finally find out which one of them has the correct paramatres. <{POST_SNAPBACK}> Nice gun, old school even too! ... And that'd be TM! (I measured myself) Link to post Share on other sites
falconfox01 Posted January 24, 2006 Report Share Posted January 24, 2006 Sweet pic!! Definitely TM, I had to shelve my G&G M-14E2 project, I found it is a tad longer (1/2 in or so) than the real steel, not much, but enough to make the conversion too much effort. I've had a chance to take measurements off the TM M-14 and it's just about spot on. I need to get my paws on one of my own Link to post Share on other sites
vietnammarine Posted January 24, 2006 Report Share Posted January 24, 2006 Damn, but thank´s. Decision was made:) but I will rather chech it myself. That would mean that I will have to cry because of G&G functional bolt lock. Or http://dentrinityshop.com/den_search.jsp?s...M14&pg=4&rpp=10 Does anybody have some experience with this? MBL4006 - second down Link to post Share on other sites
UrPeaceKeeper Posted January 24, 2006 Report Share Posted January 24, 2006 Damn, but thank´s. Decision was made:) but I will rather chech it myself. That would mean that I will have to cry because of G&G functional bolt lock. Or http://dentrinityshop.com/den_search.jsp?s...M14&pg=4&rpp=10 Does anybody have some experience with this? MBL4006 - second down <{POST_SNAPBACK}> You do realize that with 5 minutes or even less you can modify a TM M14 to have a functioning bolt lock too? All you do is remove one small metal sprig thing on the bolt lock and everything else is in place to get it to function. I did the conversion to mine and it works maricles! I Use the King Arms Scope Mount (Not the low profile but the big one) and its amazing, my only complaint is the coloring looks a little grey under photo light but its negligable Link to post Share on other sites
vietnammarine Posted January 24, 2006 Report Share Posted January 24, 2006 Yes, I forgot, you have mentioned this once here. I have a problem with memory Because I do impression of USMC Force Recon in Vietnam, scopes are out of question but in future I would like to put together some modern stuff with M14 SOPMOD. I did not like it before but after seeing some pictures here I got lost and need one:) Link to post Share on other sites
Titleist Posted January 24, 2006 Report Share Posted January 24, 2006 The bolt release is a nice little goodie to unlock, it just serves no purpose whatsoever. Whereas for the G&G it makes practical sense because of the hopup placement. It's neat, but it's also like racking the action on an Mp5: kinda cool but who knows if it'll snap off from use. So we'll see. Link to post Share on other sites
Donut Posted January 25, 2006 Report Share Posted January 25, 2006 So the verdict is still go with TM?... Arrg... the MP7 is coming out soon!!! why?!?!?!... great... now I need to save up more money now... Link to post Share on other sites
shankskank Posted January 25, 2006 Report Share Posted January 25, 2006 sorry guys this just had to done ....pure sex ;-) http://img159.imageshack.us/img159/5292/dscf00961np.jpg <{POST_SNAPBACK}> whered you get that cheek rest thing? Link to post Share on other sites
UrPeaceKeeper Posted January 25, 2006 Report Share Posted January 25, 2006 whered you get that cheek rest thing? <{POST_SNAPBACK}> I'm thinking he made it himself =) Link to post Share on other sites
airsoftfreak14 Posted January 25, 2006 Report Share Posted January 25, 2006 With or with out that cheek rest, that gun is very awesome. Link to post Share on other sites
shankskank Posted January 25, 2006 Report Share Posted January 25, 2006 most definetely Link to post Share on other sites
Tef Posted January 25, 2006 Report Share Posted January 25, 2006 are we talking about the little spring below the ''m'' of part ''m14-9'' Link to post Share on other sites
Recommended Posts