SkillslikeaZebra Posted November 1, 2013 Report Share Posted November 1, 2013 Not sure about the VSR thing, but try to imagine if you ride a bicycle and gain some speed like 25mph, air is your biggest enemy, as to the 0.2g BB traveling 550 FPS. This is a SCAR pic for not being off-topic Ya, just didn't have any heavyweight BBs the one chance I had to shoot it live. Quote Link to post Share on other sites
Shift Posted November 30, 2013 Report Share Posted November 30, 2013 I think this thread needs a revival, sort of. Well, here's my offerings, sorry that they look like they're taken with a potato, but my nice camera isn't cooperating with me right now. Got this thing two or three years ago right before I got too busy and had to get out of airsofting. But lately I've been feeling like jumping back in so I grabbe some stuff for it. Sadly I ordered this one right when Cybergun started licensing the SCARs so my model was from their stock with the goofy trades. But over all I'm pretty happy with it so far. Never was a big fan of the 14.5 inch profile SCAR L but I feel like this set up actually works decently well. Though I still prefer the 10 inch CQC setup, it's much more pointable. Only things that I feel are missing is a dual pressure switch, a FDE stubby Tango Down VFG, some sort of AAC 51T, and maybe some rail covers. But right now I feel it's pretty much complete as is. Quote Link to post Share on other sites
OriginUK Posted December 29, 2013 Report Share Posted December 29, 2013 Time to bump this topic! Just picked this up, TM Scar-L Recoil: Any tips? Quote Link to post Share on other sites
MRF Posted December 29, 2013 Report Share Posted December 29, 2013 Any tips? ...remove some weight... Quote Link to post Share on other sites
OriginUK Posted December 29, 2013 Report Share Posted December 29, 2013 ...remove some weight... The TM is nice and light, it doesn't weigh as much as you'd think. Quote Link to post Share on other sites
BigAl Posted January 6, 2014 Report Share Posted January 6, 2014 Managed to break the stock on my D Boys SCAR L, anyone know where I can get a replacement part? I think CA is compatible. Quote Link to post Share on other sites
-Drake- Posted January 7, 2014 Report Share Posted January 7, 2014 I believe Evike still have some Dboys bits, or did last time I checked. The CA one is pretty poor quality compared to the Dboys. I owned a CA Scar many moons ago and its stock snapped first day it was used, so I actually replaced it with a Dboys one from RSOV. It definitely seemed sturdier than the original CA one and it was easier to fit the battery as well. Quote Link to post Share on other sites
Dj_komodo Posted January 8, 2014 Report Share Posted January 8, 2014 WE Scar Quote Link to post Share on other sites
Legionnaire759 Posted January 8, 2014 Report Share Posted January 8, 2014 How do you use the Dual Pressure switch with the EGLM? Quote Link to post Share on other sites
Dj_komodo Posted January 8, 2014 Report Share Posted January 8, 2014 i got really big hands I dont usually use the EGML, i have a foregrip, but the picture is a lot nicer with the EGLM Quote Link to post Share on other sites
jammie654 Posted January 12, 2014 Report Share Posted January 12, 2014 DSC_1261 by Jamie_Atkinson, on Flickr DSC_1255 by Jamie_Atkinson, on Flickr TM Scar-L recoil in Black wired for Deans and ran on 7.4 LiPo'sStandard internally bar a Firefly Hop Rubber and flat NubSurefire M600Eotech 551ForegripWill be upgrading the motor to a Lonex A2 with an Eagle6 M100 Spring in the next month and maybe looking at a Prommy tighbore depending on what the FPS is after the new spring Looking to get it sprayed at some point, Unsure what to go for though Quote Link to post Share on other sites
.50 Cal Posted January 19, 2014 Report Share Posted January 19, 2014 Can anyone id the eglm manufacturer on the right? Quote Link to post Share on other sites
Roland1014 Posted January 19, 2014 Report Share Posted January 19, 2014 Color is off, bad mold marks, looks cheap as *fruitcage*. Lancer Tactical? Quote Link to post Share on other sites
.50 Cal Posted January 20, 2014 Report Share Posted January 20, 2014 A friend purchased it from actionhobbies some time ago and can't remember. I am trying to get a replacement trigger mech to fit a SCAR H but a VFC doesn't fit. Quote Link to post Share on other sites
sunburnthammer Posted January 27, 2014 Report Share Posted January 27, 2014 Will get some pimped magpul scar photos up soon... Sent from my iPad using Tapatalk HD Quote Link to post Share on other sites
vorpalbunnie Posted January 28, 2014 Report Share Posted January 28, 2014 A friend purchased it from actionhobbies some time ago and can't remember. I am trying to get a replacement trigger mech to fit a SCAR H but a VFC doesn't fit. I think SEALS is the company that made an EGLM clone. Quote Link to post Share on other sites
OriginUK Posted January 29, 2014 Report Share Posted January 29, 2014 Quote Link to post Share on other sites
hiawatha Posted January 29, 2014 Report Share Posted January 29, 2014 Very clean originUK, i like it! TM recoil? Quote Link to post Share on other sites
Pdubyuh Posted January 29, 2014 Report Share Posted January 29, 2014 Its on the recoil group on the book of face so I would assume it is. I wish i could leave my guns that simple I always strap every but of techno wizadry i can onto mine!!! Quote Link to post Share on other sites
hiawatha Posted January 29, 2014 Report Share Posted January 29, 2014 Ah ok! I am thinking of turning my scar into something similar to Origins. Maybe even get rid of my t1 and only run mbus sights. Just need to find a correct length barrel extension as i got the cqc version. Any ideas ? Quote Link to post Share on other sites
OriginUK Posted January 29, 2014 Report Share Posted January 29, 2014 Hey, Yes it's a TM Recoil, wouldn't buy anything else . Has a new flash hider (aggressive compensator), since the stock one is fugly, T1, TD grip and LaRue index clips. It's not QUITE finished yet, but it's staying pretty simple. I really like the T1 on the SCAR, also have a visionking scope with larue spr mount. My advice, take your inspiration from a RS picture thread. My inspiration: And Quote Link to post Share on other sites
OriginUK Posted February 6, 2014 Report Share Posted February 6, 2014 (edited) New bits! Edited February 6, 2014 by OriginUK Quote Link to post Share on other sites
OriginUK Posted February 15, 2014 Report Share Posted February 15, 2014 And the heavy! Quote Link to post Share on other sites
hiawatha Posted February 15, 2014 Report Share Posted February 15, 2014 Nice! In my opinion that sight look better on the heavy while the t1 should stay on the Light. T1 with one of those rubber covers in tan would look perfect i believe. Quote Link to post Share on other sites
OriginUK Posted February 16, 2014 Report Share Posted February 16, 2014 better quality: Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.