Dynamix Posted July 9, 2010 Report Share Posted July 9, 2010 (edited) http://www.youtube.com/watch?v=DNJBbpDUtvo Edited July 9, 2010 by Dynamix Quote Link to post Share on other sites
Beardy1975 Posted July 10, 2010 Report Share Posted July 10, 2010 Nice review chap, just a couple quick questions for you: 1) Did you do a firing or accuracy test? 2) Have you had any problems at all with the blowback? It would be interesting to see if it has as many jamming problems as some of the other manufacturers out there. Decent length video too, short and concise. Regards, Beardy Quote Link to post Share on other sites
Dynamix Posted July 10, 2010 Author Report Share Posted July 10, 2010 I did a firing test. The accuracy was atrocious until i cleaned the barrel. Then it was average. And i havnt had any jamming Quote Link to post Share on other sites
Schultz98 Posted July 11, 2010 Report Share Posted July 11, 2010 im not sure they specifically tried to make the barrel look like a bullet but the copper used on the inner barrel may cause the perception of a shell casing or something like that. had a comrade in arms who had one of these but the cyma model, was great but he stripped the piston Quote Link to post Share on other sites
Beardy1975 Posted July 11, 2010 Report Share Posted July 11, 2010 I did a firing test. The accuracy was atrocious until i cleaned the barrel. Then it was average. And i havnt had any jamming Thanks for the extra info Dynamix, good to hear that there's no jamming and reasonable accuracy. Might be worth adding to the armoury! Beardy Quote Link to post Share on other sites
Gumball Posted July 12, 2010 Report Share Posted July 12, 2010 This being the CYMA CM050, have you noticed any problems with either the stock(vertical play) or, when inserting a mag and holding the rifle by said magazine, have you noticed that if you pull the magazine towards yourself the front tooth of the magazine becomes dislodged? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.