perr_mike Posted July 9, 2010 Report Share Posted July 9, 2010 Hi All A few of you probably will know of my Diemaco barrel extensions, I've another batch coming in very soon (Which will be followed by a new and improved SF556K silencer). The batch of barrels will consist of 6.5" Extensions (To fit your 10" barrel - (thread starts a few mm after the foresight) 6" Extension to fit CA CQB-R length or similar 10.5" outer barrels and a new development a copy of the later model smoother Diemaco barrel (Missing one of the steps ) these will be in 6.5" and will be limited to 5 pieces initally (Like this one CLICK) Pics up next week Prices at the moment are £30 each (Posted and paypalled to the UK, overseas its an extra £5 for shipping, bulk purchases POA). I've yet to confirm final prices with the new manufacturer but the £30 is the maximum they will cost, I'm working on getting them cheaper. All of this batch will be available in left hand/ negative thread only (I can get positive/ right hand barrels done as a special order but need a minimum of 5 pieces). These will all come annodised at no extra cost unlike previous batches. Cheers Mike Link to post Share on other sites
Panoptes Posted July 10, 2010 Report Share Posted July 10, 2010 Hi Mike Any chance you can do the new vortex flash hider as seen on L85s? I could murder one! Link to post Share on other sites
perr_mike Posted July 12, 2010 Author Report Share Posted July 12, 2010 I would love to help with that mate if I could get one to copy it wouldnt be a problem but dont think that would happen... Still if you can get me some decent images I'll see what I can do! Prices now confirmed at £25 each posted for the new run of barrels all will be -ve / left hand thread. Will confirm mix of barrels available asap. Link to post Share on other sites
1st Commando Posted July 19, 2010 Report Share Posted July 19, 2010 Hi Mike , any chance you will be doing the new silencers with positive thread ? Gaz Link to post Share on other sites
perr_mike Posted July 19, 2010 Author Report Share Posted July 19, 2010 Hey Gaz The new silencers wont be threaded in the old way they will probably come with a FH556 that they will fit to. These will be threaded either way. Cheers Mike Link to post Share on other sites
1st Commando Posted July 20, 2010 Report Share Posted July 20, 2010 Sounds perfect Mike Cheers Link to post Share on other sites
kelo 1 1 Posted August 4, 2010 Report Share Posted August 4, 2010 Alright fella, im looking for a 6" barrel extension, but as it is being connected to a G&P barrel i would be looking for a clockwise thread. If you have other people looking for them, count me as one towards the 5! Kris Link to post Share on other sites
quinch Posted August 9, 2010 Report Share Posted August 9, 2010 Put me down for a 6.5" extension for my normal one. I'm UK based. Let me know when you want money etc etc by PM. Link to post Share on other sites
perr_mike Posted August 20, 2010 Author Report Share Posted August 20, 2010 Right guys heres what I have Standard profile- 10 x short left hands (-ve). These fit 10.5" CQB length barrels that end 1/2 inch past the foresight (e.g. CA CQB-R's) 5 x long left hands (-ve). These fit 10" barrels that end a few mm past the foresight. I might keep one of these for myself though. 5 x short right hand (+ve) thread - Systema's 10.5" PTWs, older WE's etc Price is £25 + £2 p&p (UK) each (Sorry price wasn't as good as I originally thought!) RoW £POA The threads on these may be a little tight (Depends on your barrel, fitted fine on a KWA M4 but tight on an Element 10" barrel) as they're annodised. So when fitting if it's tight I recommend you spray some WD40 on the threads and work it on slowly. The annodising is an extremely good match to the airsoft barrels we compared them against, a massive improvement for cheaper! Silencers to follow shortly the design is in its final stages. The Flash hider idea has been dropped for the time being as it would cost alot but these will be a much more faithful replica! I also have a new Diemaco barrel product to list but waiting on a picture. PM's will be going out over the weekend when I have a little more time! Link to post Share on other sites
perr_mike Posted August 20, 2010 Author Report Share Posted August 20, 2010 And the new barrel This is a copy of the more recent issue Diemaco as pictured below. Reference And the barrel fitted to Cracking Days Diemaco (Although RIF's barrel is a 10" and the extension is designed for a 10.5" barrel) These are currently only available in the short length to fit the 10.5" CQB barrel but I have them in both +ve and -ve threads so good for CA CQB's or Systema PTW's or old style WE's. 4 -ve thread left and 5 +ve thread. I will be getting them done in the long length shortly. Price is the same at £25 + £2 P&P. Cheers Mike Link to post Share on other sites
Doughguy Posted August 31, 2010 Report Share Posted August 31, 2010 mike the new barrel profile IS NOT entirely flat. it does have the middle section but its extremely flat. thats how the latest sleeve looks like: http://www.abload.de/image.php?img=picture010-2flh.jpg you see that the right side is slightly tighter than the left. the right one points towards the receiver. Link to post Share on other sites
perr_mike Posted August 31, 2010 Author Report Share Posted August 31, 2010 Interesting pic but thats not the profile I have copied, there must be yet another profile. Unfortunately I can't post the pictures as they were on a friends camera and he shouldnt have been taking pictures of them in the first place Link to post Share on other sites
perr_mike Posted September 15, 2010 Author Report Share Posted September 15, 2010 Prototype 1. Very good first run. I think the weld line is a little to far back but have advised the guy making them for me. Price looks to be confirmed at £60 plus postage for this (remember the retail version will be annodised). As soon as I've signed off the design I'll start taking pre-orders (Should be Monday) Cheers Mike Link to post Share on other sites
perr_mike Posted October 21, 2010 Author Report Share Posted October 21, 2010 I should have these in hand on Monday. Price confirmed at £60 + postage (UK £3.5 each RoW on request). I'm setting up a basic website with inventry control so I can track the orders better. This will go live as soon as I have pictures. Link to post Share on other sites
perr_mike Posted October 21, 2010 Author Report Share Posted October 21, 2010 Link to post Share on other sites
perr_mike Posted October 27, 2010 Author Report Share Posted October 27, 2010 The following are left Barrels 5 x Standard style short extensions to fit CA/ Dboys CQB-R barrels etc (-ve) 1 X Slim style short extension to Fit CA/ Dboys CQB-R barrels (-ve) 1 X Standard style long extension to fit 10" outer barrel (-ve) 2 x Standard style short extensions to fit G&P, Systema PTW, Old style WE (+ve) 2 x Slim style short extensions to fit G&P, Systema PTW, Old style WE (+ve) Silencers 21 left hand/ -ve threaded silencers 13 Right hand/ +ve threaded silencers More pics will be up later. Link to post Share on other sites
SafetyCatch Posted October 28, 2010 Report Share Posted October 28, 2010 Just got my FA556 Supressor in the post. Absolutely amazing bit of kit! The quality and the finish of it rivals a lot of the better brand name silencers on the market. 10/10 really happy with this! The quality really speaks for itself. Link to post Share on other sites
perr_mike Posted November 8, 2010 Author Report Share Posted November 8, 2010 Thanks for the positive comments Mike Quick update - Everything ordered has been shipped (Last 2 international parcels sent to Sweden today) I've still got a small number of silencers left (in both thread types). They are going quick though! Link to post Share on other sites
steel tiger Posted November 26, 2010 Report Share Posted November 26, 2010 do you have any more l119 barrels and you they fit on this? http://www.airsoftgi.com/product_info.php?products_id=7341 Link to post Share on other sites
perr_mike Posted November 26, 2010 Author Report Share Posted November 26, 2010 Hi I've still a few barrels left in both 14mm +ve and -ve threads. I'm guessing that's a US only make as I've not heard of "Javelin" before. If you can ask the retailer which thread type the muzzle/flashhider has I'm sure I can supply a suitable Diemaco 16" barrel extension or SF556 style barrel extension. Cheers Mike Link to post Share on other sites
perr_mike Posted January 1, 2011 Author Report Share Posted January 1, 2011 Still got some of these left. 3 Barrels (1 slim/ new style left hand and 2 Slim/ new style right hand - to fit 10.5" barrels) 4 Right hand threaded suppressors 9 left hand suppressors. Link to post Share on other sites
abbadon101 Posted January 3, 2011 Report Share Posted January 3, 2011 Have messaged you about an extension Mike. Link to post Share on other sites
perr_mike Posted July 20, 2011 Author Report Share Posted July 20, 2011 33 extensions received today. 11 long (to fit 10" outer) -ve thread 11 short (to fit 10.5" outer) -ve thread 11 short (to fit 10.5" outer) +ve thread Price is reduced to £20 each, UK postage £3, rest of world £7.50 tracked and insured. PM for paypal details Cheers Mike Link to post Share on other sites
perr_mike Posted July 21, 2011 Author Report Share Posted July 21, 2011 11 long (to fit 10" outer) -ve thread- 7 left 11 short (to fit 10.5" outer) -ve thread- 6 left 11 short (to fit 10.5" outer) +ve threadall sold Price is reduced to £20 each, UK postage £3, rest of world £7.50 tracked and insured. Link to post Share on other sites
Dustie Posted July 13, 2012 Report Share Posted July 13, 2012 Hi m8 Would you happen to have any of these left? Looking for one to go onto a G&P Sentry. Any info would be great. Many thanks, P. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.