steaktipz Posted August 3, 2010 Report Share Posted August 3, 2010 Let's see your homemade launchers! All launchers in this thread must be made from scratch; NO off the shelf launchers. Should it be gas powered or spring, shoot m203 shells or rubber slugs, be pretty or ugly, post pictures of it here! Link to post Share on other sites
Snigel Posted August 4, 2010 Report Share Posted August 4, 2010 http://www.arniesairsoft.co.uk/forums/index.php?showtopic=160165 Link to post Share on other sites
steaktipz Posted August 4, 2010 Author Report Share Posted August 4, 2010 Seriously? Come on. This thread is specifically for homemade LAUNCHERS. Just because the first thing on the thread happened to be a launcher doesn't make that thread the same thing as this one. I don't wanna see any AKs, M16s, snipers, or pistols. Just launchers. Link to post Share on other sites
steaktipz Posted August 4, 2010 Author Report Share Posted August 4, 2010 (edited) To get it started: My launcher! Made out of PVC bits and a few pins and screws. Shoots M203 shells, I can also use it to launch smokes using a bit of paper for wadding and the gas from the shells. To load, just pull the clevis pin back, rotate it down, and extend the barrel. The grenade is then inserted into the inner PVC pipe. Once that's done, push the barrel back in so that the grenade is right against the "firing pin" (the screw and the nut), and pull it backwards. Once shooting is done, extend the barrel, turn the launcher over, and let the grenade fall into your hand. Edited August 4, 2010 by steaktipz Link to post Share on other sites
AnotherJesus Posted August 4, 2010 Report Share Posted August 4, 2010 http://www.arniesairsoft.co.uk/forums/index.php?showtopic=133636 I'm sure this thread has been reported many times already. Link to post Share on other sites
Recommended Posts