KingPandaswe Posted July 14, 2015 Report Share Posted July 14, 2015 I read that people got problem with mag gas dump when using the we ebr, does the ra Tech trigger box fix that problem ? Quote Link to post Share on other sites
Alias1983 Posted July 14, 2015 Report Share Posted July 14, 2015 If you are doing auto you need high output valves. Try the a+ springless design I hear they are good to go. 1 Quote Link to post Share on other sites
L2E Posted July 14, 2015 Report Share Posted July 14, 2015 I read that people got problem with mag gas dump when using the we ebr, does the ra Tech trigger box fix that problem ? I have only seen that issue when you attempt to insert a magazine with the bolt forward. If you move the bolt to the rear, then there is no issue with venting gas or weird shooting performance...and the RAT complete trigger box doesn't fix that... Quote Link to post Share on other sites
Zereck Posted July 14, 2015 Report Share Posted July 14, 2015 Back then when I had mine I had the gas vent a few times until I figured out the problem. Sometimes when you insert the magazine into the gun it seems fine but it is actually placed incorrectly. You can confirm it by giving the magazine a light push from behind and if it clicks then it was not inserted correctly. Quote Link to post Share on other sites
KingPandaswe Posted July 14, 2015 Report Share Posted July 14, 2015 I have only seen that issue when you attempt to insert a magazine with the bolt forward. If you move the bolt to the rear, then there is no issue with venting gas or weird shooting performance...and the RAT complete trigger box doesn't fix that... Back then when I had mine I had the gas vent a few times until I figured out the problem. Sometimes when you insert the magazine into the gun it seems fine but it is actually placed incorrectly. You can confirm it by giving the magazine a light push from behind and if it clicks then it was not inserted correctly. ok, so that means if I would want to reload Before a mag is empty, it will do the mag gas dump? Is these common problems, or just a minor problem? Any other known faults with the rifles ? Just asking because I am interested in the ra Tech lvl3 ebr, but want as much info as possible Before spending 1380 dollars on it. Quote Link to post Share on other sites
Alias1983 Posted July 14, 2015 Report Share Posted July 14, 2015 So what screw do I need to remove in order to fix my nozzle? Quote Link to post Share on other sites
Alias1983 Posted July 18, 2015 Report Share Posted July 18, 2015 So what screw do I need to remove in order to fix my nozzle?Anyone? Quote Link to post Share on other sites
Habakure Posted July 18, 2015 Report Share Posted July 18, 2015 (edited) Have you tired YouTube? It can be very handy for mods and also a visual guide for disassembling gbb's, or even aeg's for that matter. Edited July 18, 2015 by Habakure Quote Link to post Share on other sites
Alias1983 Posted July 18, 2015 Report Share Posted July 18, 2015 (edited) Have you tired YouTube? It can be very handy for mods and also a visual guide for disassembling gbb's, or even aeg's for that matter.Yes but a closeup of the exact spot is better than my *suitcasey* 1" screen. Also did you not see my last post before where I posted the video of one that I could do d and he don't show it. Edited July 18, 2015 by Alias1983 Quote Link to post Share on other sites
Alias1983 Posted July 26, 2015 Report Share Posted July 26, 2015 (edited) Well I got it thanks to a member on another forum now I just need Evike to get 3 items in stock and this baby will be back up and running. Have not decided on an optic yet, prolly won't get one as outdoor games for me are few and far between. Trying to decide on a new "m4". Edited July 26, 2015 by Alias1983 Quote Link to post Share on other sites
Alias1983 Posted September 4, 2015 Report Share Posted September 4, 2015 Hey folks I have a dilemma, talk me out of buying the ra tech m14 nozzle and guides..... I know it is a solid set of parts but idk if I need them, I broke the nozzle cause I loaded 21 rounds. Quote Link to post Share on other sites
martin.bouda.52 Posted September 4, 2015 Report Share Posted September 4, 2015 Would stay away from ratech parts if you dont have all ratech M14. Maybe except the trigger set if you cant mod it yourself. Fyi, the latest gen of we m14 nozzle guide-the right one, is metal too. Quote Link to post Share on other sites
Alias1983 Posted September 4, 2015 Report Share Posted September 4, 2015 Mine are black looking like plastic. I was told it had ra tech guideds but they are silver. Right now I'm gonna replace the nozzle. Just wondering if the durability of the aluminum one is worth the price. I dont like replacing nozzles in this platform. Quote Link to post Share on other sites
vietnammarine Posted September 4, 2015 Report Share Posted September 4, 2015 I have found the metal we nozzle guide in my latest gen EBR (which I have bough from Evike few months ago) and also got metal one (but just the right which is usually breaking) as spares from my WE dealer. The funny thing with the right plastic nozzle guide is, that if you break just the bottom piece of the guide and turn it 180degrees, it works much better. I think if you can be carefull enough to count 20BBs, the plastic nozzle is enough. 1 Quote Link to post Share on other sites
Alias1983 Posted September 4, 2015 Report Share Posted September 4, 2015 OK plastic it is, mine is an old model. Also I need a new rear sight. The po dident know how to lower it for his scope so he ground it down Quote Link to post Share on other sites
vietnammarine Posted September 4, 2015 Report Share Posted September 4, 2015 (edited) You should be able to get RS rear sight aperture from ebay. They are the same as Garand´s one. Edited September 4, 2015 by vietnammarine 1 Quote Link to post Share on other sites
Alias1983 Posted September 4, 2015 Report Share Posted September 4, 2015 Thanks friend Quote Link to post Share on other sites
Alias1983 Posted September 15, 2015 Report Share Posted September 15, 2015 (edited) M14 back in action! Even got a feed lip. Now to pick a scope., and get some tacos Edited September 15, 2015 by Alias1983 Quote Link to post Share on other sites
Alias1983 Posted October 24, 2015 Report Share Posted October 24, 2015 I have been eyeballing this scope. http://www.evike.com/products/45590/ I see mixed reviews from RS to Airsoft. Quote Link to post Share on other sites
Roland1014 Posted September 22, 2016 Report Share Posted September 22, 2016 Does anyone have a RA receiver set? How are they? I've had this parts gun sitting in my room for years and I think it's finally time to start reviving it. I want to pump as much steel into it as possible, seeing as how everything is currently made of cheese. My original plan was to draw everything up in Inventor or Solidworks and go from there, including a one piece outer barrel populated with real parts and using a real rear sight assembly. However it might be more cost and time effective to start with all the RAT steel parts and fill in from there with custom fab parts, including 8, 42, pretty much all of the trigger (that is not capable of being swapped for real parts) and selector, and 54+66 as one piece. I also plan on using a real op rod, spring guide, stock, stock frame thing (#40), and as much of the trigger parts as possible.It will be powered by the co2 mags designed by Devilhunter, PBUH. Quote Link to post Share on other sites
Wooly_Booly Posted September 23, 2016 Report Share Posted September 23, 2016 Just a quick heads up. Luke Branch, the WE-Tech sales rep replied to a comment on their Facebook page saying he has a working prototype of the Co2 mag on his desk. Given WE's recent release of the "clamped" 80rd stanag mags which were shown somewhere in 2014, I'd like to assume they're taking a closer look at improving their magazines. 3 Quote Link to post Share on other sites
blobface Posted September 23, 2016 Report Share Posted September 23, 2016 When that happens, I'm owning a WE M14, finally. 1 Quote Link to post Share on other sites
vietnammarine Posted September 23, 2016 Report Share Posted September 23, 2016 (edited) Running my WE M14 third year, mostly (99%) OEM parts except bolt stop. From time to time switch bolt cover or bolt catch (cosmetic reasons) and keep on running on GG, but mostly MAPP in short bursts. Sure I made some DIY mods. Sent from my iPhone using Tapatalk Edited September 23, 2016 by vietnammarine 1 Quote Link to post Share on other sites
NonEx Posted September 24, 2016 Report Share Posted September 24, 2016 Hopefully that means WE AK CO2 mags might still be in the works Quote Link to post Share on other sites
Wingmann Posted September 24, 2016 Report Share Posted September 24, 2016 When that happens, I'm owning a WE M14, finally. I have a RA-Tech lvl3 sitting right next to me Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.