harborne blue Posted November 22, 2010 Report Share Posted November 22, 2010 Anyone got any details on silencers and extended barrels that will work with this kit? Thanks in advance. There's nothing to fit a silencer to. One chap (see above) used a piece of plumbing tube for a fake one though and it looks pretty good. Trouble with using an extended barrel of any length is that the kit is a tight fit as it is... Quote Link to post Share on other sites
MrBond Posted December 1, 2010 Report Share Posted December 1, 2010 Assembled it today with my new TM Glock 18c. Only had a long flashlight to put on there but still, here it is: Quote Link to post Share on other sites
davedawg123 Posted December 1, 2010 Report Share Posted December 1, 2010 Very nice. Did you have to do any mods to your kit to get it to cycle properly? Quote Link to post Share on other sites
MrBond Posted December 1, 2010 Report Share Posted December 1, 2010 Very nice. Did you have to do any mods to your kit to get it to cycle properly? Nope, everything is bone stock. Hasn't gone thru a true test yet tho, only full auto plinking indoors. It did scratch the lower of the glock a little when assembling it but the slide seems to cycle normaly. Quote Link to post Share on other sites
sacairsoftsn00py Posted December 7, 2010 Author Report Share Posted December 7, 2010 (edited) I forgot to post up about the rear sight slamming into the block that it comes in contact with when you pull the charging handle back, You need to sand it down about 1.5mm so your slide/rear sight does not get damaged after prolonged use. Also, the area where the selector lever rubs onto can be sanded down using a dremel and a sanding drum. It's pretty easy to do, just remove material...test fit...remove material...test fit...etc. Edited December 7, 2010 by sacairsoftsn00py Quote Link to post Share on other sites
davedawg123 Posted December 31, 2010 Report Share Posted December 31, 2010 Anyone know if the TM version kit will fit a KSC glock? I've had a few people ask me (ahem, FS ). While I haven't tried it myself, I would think that there could be a possibility considering the TM slide is just slightly wider and there is some leeway with the rail screw. Can anyone confirm? Quote Link to post Share on other sites
the_goat Posted January 24, 2011 Report Share Posted January 24, 2011 I went for the Tan version, fitted on KSC Glock 19. Had no issues apart from the "tight" fit on front pin. Might be an idea to thread lock some the bolts in place, other users have noted that bolts can come undone with frequent use. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.