Jump to content

Archived

This topic is now archived and is closed to further replies.

jaeger0416

Magpul PTS ACR/Masada Magazine Compatibility

Recommended Posts

 

A friend of mine give me a lend of his G&G hi-cap which fitted and worked like a dream.

 

Can you be a bit more specific as to which G&G Hi cap mag it was as I've found a few options ?

Share this post


Link to post
Share on other sites

I realise this is a fairly old thread but I'd like to add my findings for those trying to decide on mags.

 

I recently returned from a full days play using a couple of King Arms 360rd Mags with my Masada, apart from the aformentioned issue with the mags not engaging the latch easily they fed faultlessly and I didn't have any issues throughout the day. I will most likely be modifying my mags to fit a little easier.

 

I also tried out an ICS 470rd mag, fits fairly snugly as previously mentioned and isn't a whole lot bigger than the King Arms mags; also had no feeding issues using that for a few hundred rounds. The winder on the ICS is a little easier to access compared to the King Arms but isn't a dealbreaker. I personally didn't think the King Arms mags gave fewer BB's per wind than many other mags I've used but without testing I couldn't be certain.

 

To enhance King Arms Hi-Cap PMAG fitment, all you need to do is file <1mm off of the top horizontal edge of the mag-catch hole on the mag body. An exacto knife/hobby knife should be able to do it; I used a Dremel with a sanding tool, which was probably overkill.

Share this post


Link to post
Share on other sites

Have a few PMAGs I bought from someone on ASF. They are knock offs, possibly ACM. They fit in the magwell, but the mag catch will not grab unless I give it a good solid whack. I tried sanding the mag a bit near the edges and for the catch but still a no go. Wondering if anyone else has these and has been able to get them to fit:

 

DSCN2025.jpg

Share this post


Link to post
Share on other sites

lonex flash mags don't fit (sadface...)

MAG 130rnd mids fit

JG Highcips fit

Mseries mids fit

 

and those are all the mags I own. I plan on picking up 7x more M series pmags since they look bitchin and fit in all my guns biggrin.gif

Share this post


Link to post
Share on other sites

King Arms M16 120 rds Magazines (http://www.airsoftpost.com/product_info.php?cPath=23_56_427&products_id=28725). Fit properly. They have feed issues, when they are full and there's enough compression in the spring they'll feed flawlessly, once you have 15-20 rounds left the spring doesn't push as hard and there's lots of misfeeds, you'll get around 100 consistent rounds with these.

Share this post


Link to post
Share on other sites

The Star green label Pmags fit and feed perfectly in mine.

 

G&G mids fit and feed fine.

G&G highcaps fit and feed fine.

KWA hicaps won't lock into place without a serious wack.

 

MAG 190rd metal midcaps fit fine, however as with most guns, they double and triple feed unless broken in a lubed properly.

Share this post


Link to post
Share on other sites

Tried the following magazines

 

KWA 360 HICAP (does not fit)

AIM 360 HICAP (does not fit)

 

MAGPUL P-MAG 120 mid cap (Perfect Fit)

STAR MAGPUL 75 Rds (Fits)

MAG (Short VN style) 120 rds

 

S-Arm M4 160 rds (Works - just need to slide a little to the side)

LONEX M4 FLASH MAG (Actually Works - just need to slide a little to the side)

 

 

 

Share this post


Link to post
Share on other sites

Tried the following magazines

 

KWA 360 HICAP (does not fit)

AIM 360 HICAP (does not fit)

 

MAGPUL P-MAG 120 mid cap (Perfect Fit)

STAR MAGPUL 75 Rds (Fits)

MAG (Short VN style) 120 rds

 

S-Arm M4 160 rds (Works - just need to slide a little to the side)

LONEX M4 FLASH MAG (Actually Works - just need to slide a little to the side)

 

 

 

Share this post


Link to post
Share on other sites

×

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.