fiddlesticks4220 Posted June 6, 2013 Report Share Posted June 6, 2013 Thinking about a MOE grip. Also not pictured is my brown MS3 ... Should update a pic later on. Quote Link to post Share on other sites
Bucko Posted June 6, 2013 Report Share Posted June 6, 2013 Build in progress... Quote Link to post Share on other sites
PureSilver Posted June 6, 2013 Report Share Posted June 6, 2013 Chinadoll #2? That must have set you back a bit! Quote Link to post Share on other sites
NonEx Posted June 6, 2013 Report Share Posted June 6, 2013 Can someone explain what the deal is with these chinadoll things? I don't understand what makes them so special ? Quote Link to post Share on other sites
hitmanNo2 Posted June 6, 2013 Report Share Posted June 6, 2013 (edited) The RS ones were a limited run by Magpul and given to Magpul employees/people close to Magpul. They're not allowed to sell them as the don't have the licenses. Basically if you have one, you have some major bragging rights if that's your thing. Or if you just want something pretty unique/rare/piece of firearms history e.t.c. And the Prime ones are also pretty rare heh. Edited June 6, 2013 by hitmanNo2 Quote Link to post Share on other sites
Horsem4n Posted June 6, 2013 Report Share Posted June 6, 2013 and the AEG ones are pretty much just as rare. Quote Link to post Share on other sites
Bucko Posted June 7, 2013 Report Share Posted June 7, 2013 Thanks guys, I love it. Oh, and the only thing rarer than the AEG or WA Prime China Dolls is the WE China Doll. And that's what that is... Quote Link to post Share on other sites
kagami Posted June 7, 2013 Report Share Posted June 7, 2013 (edited) there is no aeg china doll lol heres my WA: could use a real barrel and flash hider, otherwise I'm pretty sure I can't put any more real parts on it Edited June 7, 2013 by kagami Quote Link to post Share on other sites
aznriptide859 Posted June 7, 2013 Report Share Posted June 7, 2013 Kagami I swear that gun looks like three-way love child of the Terminator, an Alien, and a Predator 0_0. Quote Link to post Share on other sites
Noveske Posted June 7, 2013 Report Share Posted June 7, 2013 and the AEG ones are pretty much just as rare. There are no AEG Chinadolls. The only airsoft Chinadoll receivers made were by Prime for the WA system. Quote Link to post Share on other sites
Bucko Posted June 7, 2013 Report Share Posted June 7, 2013 There are no AEG Chinadolls. The only airsoft Chinadoll receivers made were by Prime for the WA system. While the AEG bit may be true, go back one page. That's a China Doll for the WE system. Quote Link to post Share on other sites
Noveske Posted June 7, 2013 Report Share Posted June 7, 2013 While the AEG bit may be true, go back one page. That's a China Doll for the WE system. ah! I stand corrected. I didn't know they started these up again for the WE. Quote Link to post Share on other sites
kagami Posted June 7, 2013 Report Share Posted June 7, 2013 (edited) oh lol, yea i saw that guys WE a while back on ggi. I meant to say that only prime makes china dolls and they really only deal with GBBRs nowadays Kagami I swear that gun looks like three-way love child of the Terminator, an Alien, and a Predator 0_0. lol why is that xD Edited June 7, 2013 by kagami Quote Link to post Share on other sites
NeoVeNoM Posted June 7, 2013 Report Share Posted June 7, 2013 How about a PTW chinadoll? that would be über dollars. Quote Link to post Share on other sites
Horsem4n Posted June 7, 2013 Report Share Posted June 7, 2013 There are no AEG Chinadolls. The only airsoft Chinadoll receivers made were by Prime for the WA system. ah, i figured someone made PTW china dolls. but i had meant to say "airsoft" instead of "aeg", but i wasn't thinking. Quote Link to post Share on other sites
kagami Posted June 7, 2013 Report Share Posted June 7, 2013 with the way prime is making PTW lowers at the moment, it's a possibility. I would say they are available but probably like the WA's were at some point in time, for people that knew prime/g&p whatever. As you guys probably know its not like any retailer had SKUs on these so someone with connections probably decided to sell his at some point Quote Link to post Share on other sites
PureSilver Posted June 7, 2013 Report Share Posted June 7, 2013 I hope PRIME don't leave the AEG receiver market altogether - I want them to make receivers for the Recoil Shocks... Quote Link to post Share on other sites
TheFull9 Posted June 16, 2013 Report Share Posted June 16, 2013 Dual TMAGs. Just about the best all-round ammunition source for compatible AEGs I've discovered thus far. These new PTS MagLinks are solid as a rock. Quote Link to post Share on other sites
Lone_Bullet Posted June 16, 2013 Report Share Posted June 16, 2013 Tempted, but I don't think they'll work well in a Type 97. CKinnerley, how do you store them on your LBE? What pouches? Quote Link to post Share on other sites
TheFull9 Posted June 16, 2013 Report Share Posted June 16, 2013 (edited) I wouldn't personally, I'd run a set of linked mags in the gun to start with, then put them in to a dump pouch and move on to singles. For me 240 would be quite a lot to get through in most games anyway. That said there are all sorts of setups one could potentially use. A triple STANAG pouch would hold pairs like that. For example: http://www.uktactical.com/acatalog/Warrior_5.56mm_90_Round_Mag_Pouch.html http://www.uktactical.com/acatalog/Elite_Ops_Single_NSR_5.56mm_90_Round.html Or if you got a short enough shingle that'd work, it'd need to be 3 PALS rows high but those aren't too uncommon. I tried the pictured setup in a TACO just now and it'd probably be secure enough but there's 1 PALS row empt in the base of the pouch where the Link stops the magazine fully seating. Again however another option would be to stagger the magazines, if the MagLink was attached right at the bottom of one of them you could presumably fully seat that mag in to a pouch that's 4 PALS rows tall (TACO, FirstSpear Speed Reload, ITW FastMag etc). I probably wouldn't utilise that method myself since you have one mag sort of 'floating' as it were outside the pouch, but for CQB airsoft I see no reason why it couldn't function. Definitely not recommended with GBBr mags though, the weight of 2 of those being held by the friction of just one pouch would not end well. Edited June 16, 2013 by CKinnerley Quote Link to post Share on other sites
Isamu Posted June 16, 2013 Report Share Posted June 16, 2013 I thought about getting those clamps for my TMags too but the price makes me think about it twice as I would only buy one to use them in those moments when you need to supress the OPFOR, but I think it woule be more efficient to just duct tape a couple of cyma 190rounders, not so fast to reload or cool looking, but I wouldnt have problems fitting them into regular M4 pouches Quote Link to post Share on other sites
Dragunov63 Posted June 16, 2013 Report Share Posted June 16, 2013 Finally got my Masada AKM looking how I want it Nige Quote Link to post Share on other sites
hitmanNo2 Posted June 16, 2013 Report Share Posted June 16, 2013 What torch do you have on that? I'm looking for something similar. Quote Link to post Share on other sites
Dragunov63 Posted June 16, 2013 Report Share Posted June 16, 2013 Next torch A6 mate Have a look on Henie Haynes they are a damn good bit of kit and don't break the bank, just don't buy their mount as its rubbish. Nige Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.