FHairsoft1 Posted April 7, 2011 Report Share Posted April 7, 2011 Holy ######! I needs me a UBR stock! Those are looking reallly nice guys! Quote Link to post Share on other sites
MRF Posted April 7, 2011 Report Share Posted April 7, 2011 (edited) Thanks Hwagan! Â Â Â Maybe it's the FDE underneath? I originally wanted black but I got a decent deal on the FDE so I'm happy. Â I prefer the rectangular profile of the FSP/Lites. The RIS II's feel too skinny for my tastes. I like my guns like I like my women, meaty. Well, rack wise anyway. Â Actually I think rail covers are a problem by themselves. Some rails looking bad a..s great. FSP Lite, mk18 for example, and attaching covers just... ruins their look. BTW I really envy You . I would love to buy 9 inch FSP in FDE but there's no airsoft replica on market... Â Â And yes. RIS II looks skinny. But only in profile. Looking from above, front or below, Lites are skinny ones . Edited April 7, 2011 by MRF Quote Link to post Share on other sites
bOp Posted April 7, 2011 Report Share Posted April 7, 2011 (edited) Finally finished externals. Just need to replace my Torus shell with a standard G&P 8mm shell and replace the old gears with 8mm and it's done.  The Torus shell does not like my G&P receiver. Seems the gearbox shell is slightly too fat and wont sit flush in the lower receiver causing the selector plate to be a little confused. Safe is in between Safe and Semi. Safe slightly works when it's set to Safe, but if you pull hard enough the trigger clicks and pulls.   Some quick photos:    Spec list for a change  G&P Noveske MUR-1 receiver RS Magpul CTR (BLK) RS Magpul RVG (BLK) RS Magpul MBUS set (BLK) RS Magpul RSA Magpul PTS MS2 (BLK) Magpul PTS MOE Grip (BLK) Magpul PTS MOE Trigger Guard (BLK) Magpul PTS ASAP Pro&T 10'' Noveske Rail  RS EOTech 552 DYTAC 10.5inch Outer Barrel DYTAC Vltor Gas Block Dytac SCAR Flash Hider Element M300 Scout light  Internal:  Modify Torus 7mm Shell Modify Modular Gear Set (Top Gear 15.05) Modify Selector Plate TM Piston Guarder SP90 Prometheus POM Piston Head Systema Cylinder Head Systema Teflon Cylinder Systema Air Seal Nozzle Systema Spring Guide G&P M120 Motor EdGI 6.03mm 247mm inner barrel Edited April 7, 2011 by bOp Quote Link to post Share on other sites
Mister Miles Posted April 7, 2011 Report Share Posted April 7, 2011 I am just informing people - do not buy clone XTM's. They will not fit on a standard 20mm rail. Quote Link to post Share on other sites
Noveske Posted April 8, 2011 Report Share Posted April 8, 2011 Finally finished externals. Just need to replace my Torus shell with a standard G&P 8mm shell and replace the old gears with 8mm and it's done.  The Torus shell does not like my G&P receiver. Seems the gearbox shell is slightly too fat and wont sit flush in the lower receiver causing the selector plate to be a little confused. Safe is in between Safe and Semi. Safe slightly works when it's set to Safe, but if you pull hard enough the trigger clicks and pulls.   Some quick photos:   Spec list for a change     Very nice bOp! CTR would've been my other choice, but I wanted to stick as close to Noveske as possible and thus went with the iMOD. Any plans to re-do the trademarks on the MUR? Quote Link to post Share on other sites
bOp Posted April 9, 2011 Report Share Posted April 9, 2011 I'm not too keen on those type of stocks, I don't know why, but I just am. I have always just used the CTR and it has being the most comfortable for me, so why change? Â If I knew how to go about getting them done I would, because they look awesome on your build, and adds that bit more detail. What did you get done, laser etched them? It's trying to find someone over here to get things like that done. Just trying to get a dust cover engraved was fun... Quote Link to post Share on other sites
Mr Foxhound Posted April 9, 2011 Report Share Posted April 9, 2011 (edited) Front strap. I'll repaint it during the weekend, too busy fondling it now  PTS needs to take some notes, Azn!  If they made there own MAG-K alot of people, including me, would buy it. I'm surprised they havend decided to make one.  The full size is nice, But I dont think the wood looks good with the bodys paintjob with the MAG-SU. Needs a plastic handguard imo. A black or tan one. Or could just paint the wood. Edited April 9, 2011 by Mr Foxhound Quote Link to post Share on other sites
Noveske Posted April 10, 2011 Report Share Posted April 10, 2011 I'm not too keen on those type of stocks, I don't know why, but I just am. I have always just used the CTR and it has being the most comfortable for me, so why change? Â If I knew how to go about getting them done I would, because they look awesome on your build, and adds that bit more detail. What did you get done, laser etched them? It's trying to find someone over here to get things like that done. Just trying to get a dust cover engraved was fun... Â Yes Laser etched. Most places that do laser etching/engraving can do it. All you need to do is give them the AI file. It's like a 5 minute job. Quote Link to post Share on other sites
DFM56 Posted April 12, 2011 Report Share Posted April 12, 2011 Could someone with a PTS masada do me a favor and measure the height of the stock at the point where it attaches to the receiver and also the distance between the center of the stock pins? Â Also, any pictures of the standard fixed PTS stock would be helpful. Â Since this is a picture thread; Â Â Most of the magpul is gone right now though, still need to hack a MIAD and MVG on it. Â Â Quote Link to post Share on other sites
aznriptide859 Posted April 12, 2011 Report Share Posted April 12, 2011 Galil mags look weird in it :/ Quote Link to post Share on other sites
kingdong Posted April 12, 2011 Report Share Posted April 12, 2011 looks pretty cool DFM Quote Link to post Share on other sites
-Drake- Posted April 14, 2011 Report Share Posted April 14, 2011 Longer rail and few other bits. Â Quote Link to post Share on other sites
aznriptide859 Posted April 14, 2011 Report Share Posted April 14, 2011 VERY sexy Drake - awesome build as always. Quote Link to post Share on other sites
hwagan Posted April 14, 2011 Report Share Posted April 14, 2011 *snip* Â Â I'd like to ask for your gun's hand in marriage, if that's at all possible. Â Â Â Seriously though, well nice. +1 Quote Link to post Share on other sites
TheFull9 Posted April 14, 2011 Report Share Posted April 14, 2011 Bloody nice drake, well thought out. I think it would've been just a tad too much FDE if you'd gone for it with all the XTMs so that works very nicely. I've switched to purely using the MOE grip myself now, makes so much more sense than paying for a MIAD and then just putting the large back strap on it. Â No idea how you make your photos look the way they do but it's beautifully done and very subtle with it. Quote Link to post Share on other sites
-Drake- Posted April 14, 2011 Report Share Posted April 14, 2011 Cheers I originally bought some dytac TD style dark earth covers to go with it but the colour was way off and more of an orange =s so I went with the xtm panels instead. Â The Comp4 is sitting a bit high in the above photo but I've since removed the spacers to lower it a bit. Quote Link to post Share on other sites
TheFull9 Posted April 14, 2011 Report Share Posted April 14, 2011 TD SCAR panels, that's what you need, they make everything look awesome. Quote Link to post Share on other sites
Leon Kennedy Posted April 15, 2011 Report Share Posted April 15, 2011 (edited) Took a few glamor shots (it's a stretch calling them that) of my G&P with a few new Magpul goodiess. Â Â Â Not the greatest camera work and not the most tacticool gun, but I'm proud of what I've done with it so far. I have always been afraid of techie stuff since I'm worried about *fruitcage* up my gun to the point of no repair somehow, but I've bitten the bullet recently and began doing stuff myself. It's liberating. Edited April 15, 2011 by Leon Kennedy Quote Link to post Share on other sites
Kunlun Posted April 15, 2011 Report Share Posted April 15, 2011 Â My TM M4 SOCOM Getting the 10,5" outer barrel sooner or later! Quote Link to post Share on other sites
Mister Miles Posted April 15, 2011 Report Share Posted April 15, 2011 Â Â Quote Link to post Share on other sites
BigAl Posted April 17, 2011 Report Share Posted April 17, 2011 Work in progress. Â Quote Link to post Share on other sites
Leon Kennedy Posted April 17, 2011 Report Share Posted April 17, 2011 Work in progress. Â Certainly a mishmash of colors! The platform itself looks really cool though. Quote Link to post Share on other sites
BigAl Posted April 17, 2011 Report Share Posted April 17, 2011 All furniture and Pmags will be Multicam, rest FDE. Will also slot barrel to allow front gas block to be fixed. At the moment front is all loose, hence why it"s wpnky. Quote Link to post Share on other sites
Touchette Posted April 20, 2011 Report Share Posted April 20, 2011 Work in progress. Â Is the front grip canted? Quote Link to post Share on other sites
Sephiroth Posted May 4, 2011 Report Share Posted May 4, 2011 My Magpul PTS ACR Â Â Â Â Â Â Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.