Riko Posted November 10, 2010 Report Share Posted November 10, 2010 (edited) hmmm, I know what you are saying. that the hammer is stuck by the sear in the back in auto mode this wont happen in semi so far so good but I think that the problem still stays even when cocking in semi mode....and shooting afterwards in auto.... so starting in semi and than switching to auto didnt help (but just to be sure, I will pay attention when I shoot it tomorow and repeat your findings....) but as far as I know, even when cocking in automatic, the hammer wont be catched as long as you dont take the lower receiver apart. when its dissasembled, and you cock it in automode, than the hammer gets catched indeed here is what I mean: http://www.youtube.com/watch?v=Izl8IxEQZNU this is normal since its dissasembled, but when assembled, you dont have that issue (WE even explained how this is in the comments) WE says the sear is released by the bolt action.... just to say: it is not a normal way of working that you have to cock in semi and than switch in auto. You should be able to cock in auto as well and shoot without problems too .... At least it used to work that way with my WE scar I can tell you, if you use that technique to make your gun fire in automode, your gun isnt working properly.... Edited November 10, 2010 by Riko Quote Link to post Share on other sites
AnakChan Posted November 11, 2010 Report Share Posted November 11, 2010 http://www.rptactical.com/product-detail/magpul-pmag-30g-maglevel-capatible-for-g36-coming-november-2010/665 Oooo...bad boy!! Now can anyone convince PTS to make the airsoft version, if just only the shell and put the WE mag in it? Quote Link to post Share on other sites
Shadow_Ocelot Posted November 11, 2010 Report Share Posted November 11, 2010 Oooo...bad boy!! Now can anyone convince PTS to make the airsoft version, if just only the shell and put the WE mag in it? Sorry to hurt everyone's wallets . I forget if in the catalog they said they were making airsoft G36 Pmags or not... Quote Link to post Share on other sites
AnakChan Posted November 12, 2010 Report Share Posted November 12, 2010 (edited) Here's mine. Arrived on Friday after paying for it on Tues . Pretty fast :- Edited November 12, 2010 by AnakChan Quote Link to post Share on other sites
Riko Posted November 12, 2010 Report Share Posted November 12, 2010 (edited) okay, my findings so far concerning my automatic mode problem when shooting semi, its works perfect, it is a real joy to shoot this in semi, the kick is just wow! In auto its a different story, it wont work as good and it depends if you shoot with bursts or not. If you shoot auto with burst shots, it will happen (at least with my gun) that the sear wont release the hammer so I have to switch to semi to release the hammer.... BUT if you shoot the gun from start to finish in full automatic, basically empty your mag, than it will work out. Actually just like on the WE promo film. So I honestly would like to see them shot the gun with burst, because all they did was empty 18 mags in a row non stop! ps: I will upload some pics later on with my laser-red dot on it Edited November 12, 2010 by Riko Quote Link to post Share on other sites
Reppyboyo Posted November 12, 2010 Report Share Posted November 12, 2010 No problem with burst firing on my 39C. Quote Link to post Share on other sites
Riko Posted November 12, 2010 Report Share Posted November 12, 2010 Why do i always get the *suitcase* guns Quote Link to post Share on other sites
LordElpus Posted November 12, 2010 Report Share Posted November 12, 2010 because you were very, very bad in a former life? Quote Link to post Share on other sites
Riko Posted November 12, 2010 Report Share Posted November 12, 2010 If i only could remember Quote Link to post Share on other sites
Horsem4n Posted November 13, 2010 Report Share Posted November 13, 2010 i got to play around with one (or 2) at work. awesome things. cool down hits it hard and fast(after 30 rounds of course ) Quote Link to post Share on other sites
aaron2310 Posted November 13, 2010 Report Share Posted November 13, 2010 Any more skirmish reports? Specifically the CQB environment. Quote Link to post Share on other sites
Riko Posted November 13, 2010 Report Share Posted November 13, 2010 (edited) How many fps you guys get? edit: I now got nice figures 370 - 390's, so in semi auto it shoots like a dream! But I am not happy with the full automatic performance, and I dont really know what can be the problem. If I start at full auto, so when I enter mag and cock it, than shoot it => I have issues. If I start at semi auto, than i switch to full auto => I have the same issues. The issue is, either the gun stops firing (hammer is not engaged) or gun stops + all the gas ejects out of the gun! Now I have no more gas, mainly due to that I dont know why that happens at full auto, but I always find a bb around the valve or feeding area.... Edited November 13, 2010 by Riko Quote Link to post Share on other sites
TechnoMagi Posted November 14, 2010 Report Share Posted November 14, 2010 Maybe the loading nozzle is messed up, causing the bolt at some point to not return to battery? Quote Link to post Share on other sites
AnakChan Posted November 14, 2010 Report Share Posted November 14, 2010 Hi all, I was playing around with my new WE G39C this morning and noticed that even with 0.28g BB's, the hop was going all the way up even at 0 hop setting. I vaguely remember reading this somewhere but can't remember if it's on Arnies or on GGI. Has anyone else experienced this? TIA Quote Link to post Share on other sites
Reppyboyo Posted November 14, 2010 Report Share Posted November 14, 2010 Nope. Friend of mine used .2`s in his and had a little overhop. Using .25`s in mine and its perfectly adjustable. Quote Link to post Share on other sites
Seraphim989 Posted November 14, 2010 Report Share Posted November 14, 2010 http://www.rptactical.com/product-detail/magpul-pmag-30g-maglevel-capatible-for-g36-coming-november-2010/665 So they're still polymer but now they don't clip together. What is this I don't even Quote Link to post Share on other sites
Megalomaniac Posted November 14, 2010 Report Share Posted November 14, 2010 They most likely now fit in single M4/M16 pouches now though. 1 Quote Link to post Share on other sites
Pariah_WP Posted November 14, 2010 Report Share Posted November 14, 2010 ^That one They are designed to allow you to slip them into normal M4 pouches as opposed to doubles. Quote Link to post Share on other sites
danielsilva Posted November 14, 2010 Report Share Posted November 14, 2010 ^ That And of course they're Magpul products, that alone will generate a lot of sales 1 Quote Link to post Share on other sites
Riko Posted November 14, 2010 Report Share Posted November 14, 2010 (edited) Maybe the loading nozzle is messed up, causing the bolt at some point to not return to battery? hmmm, how do I know if its really messed up? Because when all the gas vents out of the mag in full auto, this is where the jammed bb sits. I dunno if that bb causes the venting, but there is always a jammed bb at that spot. When I take it down, I can push the valve forward and it returns back by itself......so it seems to be okay... And just to make sure, but does the nozzle tip looks with everyone like this? its not 100% round (like the top red circle), but at the top its more flat....(like in the bottom red circle) I think its normal, but I just wanna check EDIT: PROBLEM SOLVED, SOLUTION: I used another brand of bb's, I used Cybergun AEG Expert bio bb's (.20g) The bb's that DIDN'T work in full auto were the G&G .20, http://www.wgcshop.com/wgc2008/main/product_detail1.php?search_From=category&item=GG-07-096 So be aware! And I thought those bio bb's of "lesser" quality (I think that because those G&G ones had a very good rep) wouldnt make any difference....BUT NOO I was out of options so, I tought to myself, well why dont I just try the tip from someone on the canada forum and use other bb's! The difference between the G&G and the Cybergun bio other than the fact that its bio, is also that the Cyberguns have much more Edited November 14, 2010 by Riko Quote Link to post Share on other sites
LordElpus Posted November 14, 2010 Report Share Posted November 14, 2010 seriously mate, stop spamming all G39 threads with this problem. You have started a thread specifically about this and with time and abit of hope someone may figure out what the problem is. Quote Link to post Share on other sites
Riko Posted November 14, 2010 Report Share Posted November 14, 2010 yeah, but everybody views it but nobody answers that said..........PROBLEM IS SOLVED , SOLUTION: I used another brand of bb's, I used Cybergun AEG Expert bio bb's (.20g) The bb's that DIDN'T work in full auto were the G&G .20, http://www.wgcshop.com/wgc2008/main/product_detail1.php?search_From=category&item=GG-07-096 So be aware! And I thought those bio bb's of "lesser" quality (I think that because those G&G ones had a very good rep) wouldnt make any difference....BUT NOO I was out of options so, I tought to myself, well why dont I just try the tip from someone on the canada forum and use other bb's! The difference between the G&G and the Cybergun bio other than the fact that its bio, is also that the Cyberguns have much more Quote Link to post Share on other sites
aaron2310 Posted November 14, 2010 Report Share Posted November 14, 2010 Anyone from the UK had a chance to chrono this with 134a or Green? I'd be interested in using one for CQB but our limits are 330. Quote Link to post Share on other sites
AnakChan Posted November 15, 2010 Report Share Posted November 15, 2010 yeah, but everybody views it but nobody answers That's cos maybe not everyone has the WE G39C and those that do may not have that problem & therefore may not know the cause. But I did notice your post 3xposts here and in GGI . Though LordElpus does have a point about netiquette & about posting a problem just once. that said..........PROBLEM IS SOLVED , SOLUTION: I used another brand of bb's, I used Cybergun AEG Expert bio bb's (.20g) The bb's that DIDN'T work in full auto were the G&G .20, http://www.wgcshop.com/wgc2008/main/product_detail1.php?search_From=category&item=GG-07-096 So be aware! And I thought those bio bb's of "lesser" quality (I think that because those G&G ones had a very good rep) wouldnt make any difference....BUT NOO I was out of options so, I tought to myself, well why dont I just try the tip from someone on the canada forum and use other bb's! The difference between the G&G and the Cybergun bio other than the fact that its bio, is also that the Cyberguns have much more Thanks for sharing the result. That's definitely food for thought. If you have any further technical insights as to why, that'll be useful information too. Cheers. Quote Link to post Share on other sites
Kevorkian Posted November 15, 2010 Report Share Posted November 15, 2010 EDIT: PROBLEM SOLVED, SOLUTION: I used another brand of bb's, I used Cybergun AEG Expert bio bb's (.20g) The bb's that DIDN'T work in full auto were the G&G .20, http://www.wgcshop.com/wgc2008/main/product_detail1.php?search_From=category&item=GG-07-096 So be aware! And I thought those bio bb's of "lesser" quality (I think that because those G&G ones had a very good rep) wouldnt make any difference....BUT NOO I was out of options so, I tought to myself, well why dont I just try the tip from someone on the canada forum and use other bb's! The difference between the G&G and the Cybergun bio other than the fact that its bio, is also that the Cyberguns have much more I hear those Canucks really know their airsoft! Good to hear things worked out for you! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.