Riko Posted December 4, 2010 Report Share Posted December 4, 2010 Mail ehobbyasia...in the meanwhile Quote Link to post Share on other sites
GingaNinga Posted December 5, 2010 Report Share Posted December 5, 2010 KillAsimo... Hell no! Just because pimpmygun can make it happen doesn't mean it should...Just get an M4 Quote Link to post Share on other sites
AlexGreek Posted December 5, 2010 Report Share Posted December 5, 2010 Hello all I am new here So since I am waiting my own G39 and I ve seen Kevorkian G39 (back in page 11) with the left and right RIS full with markings, any ideas how to do that for mine too? I found also this http://shop.ehobbyasia.com/guarder-rail-g36c-c-type.html from Guadrer. Do you think will fit? Thanks Alexandros Quote Link to post Share on other sites
Riko Posted December 5, 2010 Report Share Posted December 5, 2010 Hello all I am new here So since I am waiting my own G39 and I ve seen Kevorkian G39 (back in page 11) with the left and right RIS full with markings, any ideas how to do that for mine too? I found also this http://shop.ehobbyasia.com/guarder-rail-g36c-c-type.html from Guadrer. Do you think will fit? Thanks Alexandros again, email ehobbyasia in the meanwhile, they answer your questions, they have a contact for a reason... Quote Link to post Share on other sites
GingaNinga Posted December 5, 2010 Report Share Posted December 5, 2010 Alex, why do you need the guarder rails? The G39C comes with rails already... Quote Link to post Share on other sites
Riko Posted December 5, 2010 Report Share Posted December 5, 2010 Alex, why do you need the guarder rails? The G39C comes with rails already... lol that is correct! Quote Link to post Share on other sites
AlexGreek Posted December 5, 2010 Report Share Posted December 5, 2010 lol that is correct! Yeap, but without markings... Quote Link to post Share on other sites
bankz5152 Posted December 5, 2010 Report Share Posted December 5, 2010 ahhhhh I want mine!!!!!!!!! Someone buy my VFC SCAR! Quote Link to post Share on other sites
LordElpus Posted December 5, 2010 Report Share Posted December 5, 2010 Yes you do. No I won't. 1stCommando leant me his for the zombie game at First and Only Sat night. A good piece of kit and the 3 mags didn't let me down once which was good considering the amount of snow on the ground. Quote Link to post Share on other sites
Spencerman Posted December 5, 2010 Report Share Posted December 5, 2010 Ok, I have a question reguarding the trademarks. As the G36 came along after I ever got my hands on one, I have not seen the real gun in person, only in pictures, but want to know, or better yet see, what the trademark differences are. If I am correct, then on the left hand side of the gun it should have towards the front "Warning: Refer To User Manual" or something similar. Then in the middle it should have the "Heckler & Koch GMBH" bit. Then there is the square with the HK logo and the model no. G36C in this case, and the serial number. On the right hand side, there should be some text written under the ejection port I believe, but I have no idea what it is. Is there anyone who can shed some light on this for me, preferably with pictures of what 'SHOULD' actually be there. Many thanks. Quote Link to post Share on other sites
Break100 Posted December 6, 2010 Report Share Posted December 6, 2010 (edited) AFAIK, the g36 series including C (which are only manufactured by HK USA) trademarks only engraved inside the square on the left side of the rifle. Any other trademarks like "warning... and HK made in Germany" only available on g36 series manufactured by HK germany such as g36 and g36k. Sorry cant provide you with the pics, but may be you can see them in http://www.hk-usa.com/military_products/ Edited December 6, 2010 by Break100 Quote Link to post Share on other sites
Spencerman Posted December 6, 2010 Report Share Posted December 6, 2010 Hmmm , I cannot access that site. I would really like to shed some light on the trademark that I have seen on the right hand side most of all, as this has eluded me for some time. It may be that the gun that I saw was stamped by another manufacturer or supplier before it was issued, similar to the way that Umarex put all of thier ###### all over the side of the guns that they licence. I would of course be referring to the military/police issue series of weapons, as I do not think that in most places the civilian version of the gun would have the full auto selector! And I would finally also like to clarify, it is five bullets in the picture on the selctor for full auto right? Not the four bullets that is on some airsoft guns (the WE and Ares versions at least)? Quote Link to post Share on other sites
danielsilva Posted December 6, 2010 Report Share Posted December 6, 2010 Hmmm , I cannot access that site. I would really like to shed some light on the trademark that I have seen on the right hand side most of all, as this has eluded me for some time. It may be that the gun that I saw was stamped by another manufacturer or supplier before it was issued, similar to the way that Umarex put all of thier ###### all over the side of the guns that they licence. I would of course be referring to the military/police issue series of weapons, as I do not think that in most places the civilian version of the gun would have the full auto selector! And I would finally also like to clarify, it is five bullets in the picture on the selctor for full auto right? Not the four bullets that is on some airsoft guns (the WE and Ares versions at least)? They aren't that big but they should help you. You can also try to conact Stickman, he's usually very helpful. You can find him lurking around the ar15.com forum or through his Flickr account Quote Link to post Share on other sites
bbstriker Posted December 6, 2010 Report Share Posted December 6, 2010 (edited) So is an engraved trade the authentic mark? If so, I think I'll get mine do at Timpsons here in the UK- with a stripped down receiver of course! Also, I got confirmation from Ehobbyasia that the ARES G36K barrel is not compatible with the WE G39C. Edited December 6, 2010 by bbstriker Quote Link to post Share on other sites
danielsilva Posted December 6, 2010 Report Share Posted December 6, 2010 The trades are moulded right into the receiver and the serial number "engraved". Unfortunately our police forces and military only use the full length and K models of the G36 so i don't have access ( through friends ) of actual photos of RS G36C's. Quote Link to post Share on other sites
nickthebrick65 Posted December 6, 2010 Report Share Posted December 6, 2010 Just got my G39c in the mail. Man I am in love, this gun is solid as a rock. It overhops .25's a bit right now, but I will be picking up some .28's asap for it. Quote Link to post Share on other sites
Break100 Posted December 7, 2010 Report Share Posted December 7, 2010 wow, i just realized the bullet marked on the receiver for full auto is 5 bullets instead of 4. Quote Link to post Share on other sites
Spencerman Posted December 7, 2010 Report Share Posted December 7, 2010 Wow, thanks for all the information. I now know what the correct trades are, in the box on the left hand side as pictured above, then on the right hand side there is the Warning towards the rear, then under the ejection port is 'Heckler & Koch Gmbh / Made In Germany' and then 'Heckler & Koch Inc. / Sterling VA' at the furthest most point. I really loved those engraved trades, I have to get them done on mine when I get it, but I do still have a couple of questions reguarding them. Do you know at what strength the laser was set, or how many passes it required to get that finish, it does look superb? Does the WE trademark sticker simply peel off like the umarex one does, with the help of a razor blade, or is there a little bit more to it than that? Is there a way of adding the extra bullet to the configuration, either by having them redone or by simply adding the missing one, in a way that would remain authentic looking and durable, and of course red? Quote Link to post Share on other sites
nickthebrick65 Posted December 7, 2010 Report Share Posted December 7, 2010 Quick question to you all. Gun shoots great and I really like it, however I have noticed one thing. On the second to the last shot of my mag, I noticed it sounds much different from the rest of the shots, like it isn't as powerful (recoil wise) as the others. I don't know why this is, but I have noticed it. Does anyone else have this problem? What causes this? Thanks. Quote Link to post Share on other sites
kruck Posted December 7, 2010 Report Share Posted December 7, 2010 Just got mine. Filled up a mag and got shooting, ran out of gas before BBs. Put a bit more gas in and listened for leaks, quite a big one from the fill valve. Started tightening the fill valve, was quite loose before the head of the fill valve sheared off, and gas spewed everywhere. Not the first time this has happened with WE fill valves, *bramston pickle* things. Need to get me a replacement. Anyway, kicks hard and is solidly built. Looking forward to taking it skirmishing I'll test it more thoroughly when I've got more BBs, and the snow has cleared up. The sticker just peels off, first thing I did as it was so hideous, thumbs up to WE for putting it on a removable sticker Quote Link to post Share on other sites
danielsilva Posted December 7, 2010 Report Share Posted December 7, 2010 Do you know at what strength the laser was set, or how many passes it required to get that finish, it does look superb? Are you referring to the pictures i posted from Stickman ? If so you should ask HK themselves then cause that's a RS G36c lol And apart from the serial number and model ( C or K ) all the rest ( at least i believe so, never directly confirm or saw this ) are moulded right on the receiver from the start. Quote Link to post Share on other sites
Spencerman Posted December 7, 2010 Report Share Posted December 7, 2010 Sorry, no, I was refferring to a few pages back (page 11) where Break100 had the trademarks etched onto the gun. They look awesome, and as such I have to get my gun done the same (or similar, depending on how the real gun should be, once mine arrives that is!). For me airsoft is about making it as realistic as possible without hurting anybody, and that would include the engraving on the gun. It is not the be all and end all, but I would be happier if it was as perfect as possible rather than just acceptable. Quote Link to post Share on other sites
kruck Posted December 7, 2010 Report Share Posted December 7, 2010 I'm getting a bit light headed from all this propane now, I just spent a good 20 retarded seconds trying to put an 8mm BB into the magazine . Unfortunately the window is sealed shut for the winter, so I think I'm going to have stop firing it now - despite the fun I'm having. One fill of gas gets me around 140 shots (so just short of 5 mags, 4 magazines comfortably), at around 20°C with propane, mixed single shots, rapid single shots and full auto bursts (including a very fun 15rd burst ). G&P Eotech is holding up to the recoil fine. Deadly accurate, easy to put 2-4 rapid shots into the same hole at around 6 metres, can't test further than that at this time One thing I notices is that it is very easy to load the magazines by hand, which I didn't expect (and I don't think I saw anyone mention). This is very good for me, as I won't have to carry a tool or speedloader with me onto the field (which I dislike). The magazines hold 34 BBs but won't go in with more than 33, unless you lock the bolt back before inserting the magazine. Every little helps, eh. The laser etched trades posted previously look fantastic, if someone finds a place in the UK that can do that for a reasonable price it's probably something I'd look into. Quote Link to post Share on other sites
Break100 Posted December 8, 2010 Report Share Posted December 8, 2010 Sorry, no, I was refferring to a few pages back (page 11) where Break100 had the trademarks etched onto the gun. They look awesome, and as such I have to get my gun done the same (or similar, depending on how the real gun should be, once mine arrives that is!). For me airsoft is about making it as realistic as possible without hurting anybody, and that would include the engraving on the gun. It is not the be all and end all, but I would be happier if it was as perfect as possible rather than just acceptable. If only you can send me the upper receiver, my friend can realize what you wished as I believe he really knows about the g36 trades. But in any chances, i will ask him about the laser power needed to get the engraved trades done (only if it's not a secret recipe for him ). Quote Link to post Share on other sites
L4byr1nth Posted December 8, 2010 Report Share Posted December 8, 2010 So what do we think overall then? The magazines seem of a better design than the M4-style 30 rounders - I'm especially interested in the reports of just how many mags you can get from one fill! Shame about the trades, but there are always solutions. I'm pretty sure I won't be buying this, as I'm holding out for the WE MP5, but it's always interesting when a new system comes out. Also, who knows when the MP5 will be out? I need my H&K fill, and might have to pick one of these up in the interim Ben. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.