AG1212 Posted December 20, 2012 Report Share Posted December 20, 2012 Kewl, I will probably end up selling it for more than I paid anyways Best way to do airsoft; buy broken guns or bits or really good deals and make enough selling them to buy a different gun each month. Quote Link to post Share on other sites
AG1212 Posted January 3, 2013 Report Share Posted January 3, 2013 This thing is a beast O_o Anyone know if this will fit? Don't shoot me I just prefer M4 stocks. Quote Link to post Share on other sites
ollie_ty Posted January 8, 2013 Report Share Posted January 8, 2013 Can you guys all list your Hop/barrel setups and what sort of accuracy your getting along with FPS please? Really struggling to get any real range out of mine. Quote Link to post Share on other sites
TerranCmdr Posted January 8, 2013 Report Share Posted January 8, 2013 (edited) Im using stock barrel with an H-nub. Hop is at about 75% up I figure. Getting 370-380 fps with .2s, but I play with .25s. Accuracy is dead on, good to at least 150ft or so if I remember correctly. Should mention I have the "K" model. Edited January 8, 2013 by TerranCmdr Quote Link to post Share on other sites
blingblip Posted January 8, 2013 Report Share Posted January 8, 2013 Not me but my friend uses it with a new bucking, cant remember which (possibly ra-tech) with .28's seems to get on alright. firing just below 350 on .2s Quote Link to post Share on other sites
icolater Posted January 9, 2013 Report Share Posted January 9, 2013 (edited) Ra tech works well for me on .25, can get nice range. Edited January 9, 2013 by icolater Quote Link to post Share on other sites
ollie_ty Posted January 9, 2013 Report Share Posted January 9, 2013 Im currently using a Firefly nub and an Angry Gun stainless barrel, But I just cant get AEG range out of it. My stock FAL shot at least 10m on a flat trajectory. Im wondering if its due to the FPS Variance Quote Link to post Share on other sites
Leshy Posted January 9, 2013 Report Share Posted January 9, 2013 Npas g36@ 1.13j stock rubber I can engage. With confidence at 50m with .30. Quote Link to post Share on other sites
Bucko Posted January 9, 2013 Report Share Posted January 9, 2013 My buddy and I are running A+ Studio REAPS buckings - him in his WE G39 with extended tightbore and me in my WE M4 Diplomat (a 7" short barrel). Both of us run 0.30g BBs. We haven't empirically measured his range, but it's quite far and accurate. My M4 is getting about 200' out of a barrel only slightly longer than a pistol, running about 360 FPS. Accuracy is good, but I haven't empirically tested it either. We'll try and do that some time soon. In the meantime, pictures of his WE. I assisted him on the paint, mostly just advising and teaching technique. He loves this gun... 1 Quote Link to post Share on other sites
icolater Posted January 9, 2013 Report Share Posted January 9, 2013 That is a thing of Beauty. Quote Link to post Share on other sites
Bucko Posted January 10, 2013 Report Share Posted January 10, 2013 I'll pass along the kind words! We had to dremel away part of the handguard to make room for the suppressor, but it was well worth it. It's kicking out over 480 FPS now, so he's very careful where he points it. I love the Elcan on there. What do you guys think? He's not a fan... I have since painted the optic tan, so it may look better now. Quote Link to post Share on other sites
Harmless Posted January 11, 2013 Report Share Posted January 11, 2013 Anyone had problemswith full auto? semi is fine, but the 2nd and 4rd bb seems to just dribble out of the barrel on full auto. Quote Link to post Share on other sites
ollie_ty Posted January 11, 2013 Report Share Posted January 11, 2013 When I swapped out my nozzle for a new one, that stopped. Quote Link to post Share on other sites
TerranCmdr Posted January 11, 2013 Report Share Posted January 11, 2013 Haven't had any problems on my end with full auto, although I rarely use it. 30 rounds go very quickly. Quote Link to post Share on other sites
Harmless Posted January 11, 2013 Report Share Posted January 11, 2013 I don't use full auto much, so i don't really know if this was a problem from the start. Do you think the nozzle is damaged? Quote Link to post Share on other sites
AG1212 Posted January 13, 2013 Report Share Posted January 13, 2013 What's the lowest FPS I can get using NPAS and a K-length barrel? Quote Link to post Share on other sites
ollie_ty Posted January 14, 2013 Report Share Posted January 14, 2013 like 60? mine has a great range of FPS. 1 Quote Link to post Share on other sites
AG1212 Posted January 14, 2013 Report Share Posted January 14, 2013 Fantastic Quote Link to post Share on other sites
Bucko Posted January 14, 2013 Report Share Posted January 14, 2013 I don't know if it's the same for the G39 as it is for the M4, but I've gone as high as 525 FPS and as low as 350 with my WE AR build using the same barrel. I'm sure you can dial it in perfectly for your needs. Quote Link to post Share on other sites
AG1212 Posted January 20, 2013 Report Share Posted January 20, 2013 What tool is needed to tighten the barrelnut? My barrel is getting rather wobbly. Quote Link to post Share on other sites
ollie_ty Posted January 20, 2013 Report Share Posted January 20, 2013 I used a screwdriver. 1 Quote Link to post Share on other sites
AG1212 Posted February 12, 2013 Report Share Posted February 12, 2013 (edited) Does anyone know where I can get a replica of the KAC split top rail with built-in iron-sights? Like this: Thanks Edited February 12, 2013 by AG1212 Quote Link to post Share on other sites
ollie_ty Posted February 12, 2013 Report Share Posted February 12, 2013 You'll struggle. Check the G36 picture thread mate. Quote Link to post Share on other sites
TerranCmdr Posted February 12, 2013 Report Share Posted February 12, 2013 Yup, I have searched far and wide for a decently priced one. I don't think one exists. I actually just ended up cutting my standard rail in half. http://www.arniesairsoft.co.uk/forums/index.php?/topic/183425-g36-picture-thread/?p=2595475 By all means, please let me know if you do find something. Quote Link to post Share on other sites
Orius Posted February 12, 2013 Report Share Posted February 12, 2013 There appears to be one here: http://www.scopeandlaser.com/?p=6&s=c539aa216dbd2e6f20b464f49924f2d6&lang=en&id=2401 But ask about the stock beforehand as I suspect their stock-list isn't up to date. You'd probably need to sand the sight mounts on the rifle to make the sights fit. 1 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.