Jump to content
-Clover-

WE G39C GBB

Recommended Posts

Army R36 is a copy of WE G39 but it is copy of first generation G39s.

It has not reinforcement in the hammer, firepin-locker. The magazine tightened by two pin not with screw. The nozzle spring also weak as the G39 has. If you get double-feed then you nozzle and hopup chamber will damage.

 

t is cheap for parts and for basic gun if you want to upgrade it but this build quality and the inner quality is much worst.

Share this post


Link to post
Share on other sites

Bit of an update:

 

One mag spontaneously decided to leak after I filled it with gas, will probably just have to take it down, oil the valve and o-ring and it'll be back to normal.

 

A more worrying development is that when cocking the rifle whilst on FA, the trigger won't engage and drop the hammer, I have to switch to Semi or Safe and back again for it to engage. I've noticed that the trigger goes marginally a bit farther forward when cocking on FA than on Semi. Anyone else experience this?

We have that problem too, started happening during a function test and now full auto only works intermittently. Can't find a fix online for the life of me

I know its a couple years late, but if anyone else comes up with this issue, check your trigger bar up front where it goes vertical and points up. when on FA, that is where the bolt carrier hits, pushes forward, and disengages the FA sear from the hammer. If this is bent forward slightly, when the carrier slams home it does not disengage the sear. Most likely you will need to replace it, as bending it back to 90 degrees will significantly weaken it...ask me how I know!

 

Anyways, I recently acquired one of these...definitely a solid gun and seems like it will be fun in games. First thing I did,though, was replaced the trigger, hammer, and sear with angel custom parts. I don't know what the previous owner did with the gun, but the stock stuff was worn to the point that the gun would fire on pulling the trigger AND releasing it. Aside from that, and the bent trigger bar, there is also a bit of slop in the selector so I just ordered new gears and the selector itself. At least OE replacement parts are pretty dang cheap! Aside from what I've replaced, the gun came with an angel custom charging handle and a tbb. I also modified the bolt release system to work as a bolt catch like the real steal, alol wing the bolt to be held open. There is no longer a bolt release function, the bolt gets released by charging the handle on a loaded mag or no mag.

 

 

20160307_1940022_zpsu9spfqcr.jpg

20160307_1940232_zpswg4cljwb.jpg20160309_1916382_zpsbsovnero.jpg

20160309_1916462_zpsyjfrqeox.jpg

20160309_1808592_zps89rehkq2.jpg

20160312_1825182_zpsx5s19bho.jpg

Edited by Bostitch
  • Like 1

Share this post


Link to post
Share on other sites

Sweet.

 

Didn't by any chance see my bolt catch mod on YouTube did ya? Looks like you routed it the other way than when I did it.

 

(after looking at your posted youtube channel) actually yes, I did see your video. I decided to route it under and around since there is a much bigger area for the paperclip (or whatever you want to use) to contact, and it should give a stronger contact being a direct pressure on the catch. How is yours holding up? 

Edited by Bostitch

Share this post


Link to post
Share on other sites

Cool man. Good job! Yeah it held up perfectly till the time I sold it on, I guess it's still going strong today. There was very little to go wrong with the mod if it's held on tight.

Share this post


Link to post
Share on other sites

After all these years I still haven't fixed it xD My G39 is currently a pile of parts...it kept having failure to fire with some of my magazines, so I gave up trying to skirmish with it.

Share this post


Link to post
Share on other sites

Hey, has anyone tried if WE G39 mags lock in Stratagem Talon holders, or are they AEG compatible only?

A bit too steep shipping costs to buy one and test, then find out I need couple more... :D

Share this post


Link to post
Share on other sites

Yep. Totally compatible. The ridges around the magazine lock into the recesses on the Stratagem perfectly.

 

Just watch how you go because I've had a couple of mags fly out when jumping/diving through windows. And they were mounted right side up too. Elastic retention cord would be advisable.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.