WE G39C GBB

[1st Commando]

that sounds like over hop ,are you sure you are adjusting the right way ?

[bbstriker]

Does anyone have alink to the NPAS kit for this gun. I got m G39C on Friday. It's the best GBB I've ever used. Amazing- even in cold weather circa 5 centigrade!

[AnakChan]

You only need to click back one page, mate.

[Break100]

that sounds like over hop ,are you sure you are adjusting the right way ?

 

I tried several time and the result still the same. Dialed to minimum hop the bb rolled out at the second shot and i must recharge it. If i dialed to the left/increase just for a bit, with 0.2 it will over hop. So does anyone here also experience this? I almost sure that all WE gbbrs have this curse.

[mnmc10]

"I almost sure that all WE gbbrs have this curse."

 

on the old ball bearing type hop yes. but not with the marui type hop rubber....

 

i have a gut feeling that the round thing inside the hop assembly was cut a tad too long thus jamming in the slot.

 

 

it looks like a big oring that they cut to size by hand. cause on my pdw that part was not cut squared.

 

see if you can replace it with an insulation from a copper wire or if it fits you can try if the one used in AEGs will work.

Edited November 22, 2010 by mnmc10

[1st Commando]

I can confirm that G&P front kit for aegs fit and work fine !

 

Stock rubber from aeg fits fine too meaning I have been able to do away with the squared edges

[bbstriker]

Last night I fired off a whole mag at 2 celcius. I left the mag for 2 hours in my fridge which shows 2 celcius temp.

 

Took it out and fired off a 30 round mix of single and full auto. I'm gobsmacked by the performance of this rifle!

 

Does anyone know if WE Airsoft plan on Co2 mags for the G39C? If they do release Co2 mags for this baby then sub-zero Celcius skirmishing with a GBB rifle is here.

Edited November 22, 2010 by bbstriker

[1st Commando]

To be honest having owned pretty much all the WE range plus some other makes I will never ever put a CO2 mag in my guns !

[bbstriker]

I can confirm that G&P front kit for aegs fit and work fine !

 

Stock rubber from aeg fits fine too meaning I have been able to do away with the squared edges

Thanks for that. Do you know which RIS handguard may fit on the G39C? I rather fancy the idea of a G36C RIS handguard and a silencer.

[Reppyboyo]

Skirmished mine yesterday.

No more than 5c, worked fine all day.

[LordElpus]

Last night I fired off a whole mag at 2 celcius. I left the mag for 2 hours in my fridge which shows 2 celcius temp.

 

Took it out and fired off a 30 round mix of single and full auto. I'm gobsmacked by the performance of this rifle!

 

Does anyone know if WE Airsoft plan on Co2 mags for the G39C? If they do release Co2 mags for this baby then sub-zero Celcius skirmishing with a GBB rifle is here.

 

Yes they are making a Co2 mag but i do not know the timeframe for it.

 

Had the too brief chance to play with one Sat night. Fired of a mag doing burst 3 half second burst 3 (more or less how i tend to use FA) and it had no problems at all considering it was half past midnight and the mag had been in the car all the way from Leicester buried in kit.

[rvp69]

what about the HOP ,is the gun shooting straight?

[Break100]

what about the HOP ,is the gun shooting straight?

 

 

mine is not. but someone here said that it works fine with firefly hard bucking

[tangloppen]

Commando, explain please

[1st Commando]

explain what sorry ?#

[Reppyboyo]

what about the HOP ,is the gun shooting straight?

 

Stock rubber is adequate for CQB, overhops .2`s but works fine with .25`s.

Used a Firefly hard, groupings were improved as was consistency.

Now using a Firefly soft, overhops .25`s with the hop off but the accuracy and range is excellent.

 

Got a Prommy air seal rubber to try next.

[LordElpus]

So using .28s with a Firefly soft would be just about perfect?

[Reppyboyo]

Probably.

The overhop gave me great range with .25`s.

With .28`s it should flatten it out and hopefully keep the range.

[LordElpus]

cheers mate, i'll keep that in mind for when i get mine. Where did you source your firefly rubbers from?

[Reppyboyo]

Got both my Firefly`s from Fire Support.

About £20.

Not cheap for a piece of rubber but hey ho this is airsoft.

 

Prommy Rubber I ordered from ehobby.

[bbstriker]

How easy is it to change hop rubber?

[Reppyboyo]

Couldn't be simpler tbh.

[Break100]

Stock rubber is adequate for CQB, overhops .2`s but works fine with .25`s.

Used a Firefly hard, groupings were improved as was consistency.

Now using a Firefly soft, overhops .25`s with the hop off but the accuracy and range is excellent.

 

Got a Prommy air seal rubber to try next.

 

 

Thanks! this is a very useful information. I wonder if i can get it from WGC. The one that available in my town is rubber from KingArms and no idea whether it's hard or soft rubber. Mine with stock rubber must use 0.3 to flatten the bb flight path.

 

I noticed that the part inside the stock rubber which pressing the bb is not smooth may be due to the cutting process.

[AnakChan]

Hmmm....I found my stock WE39C to overhop even with 0.28g BB's. So FF kurages over hop too? My goal is to use with 0.2g BB's.

[mnmc10]

can you guys try to replace the cylindrical rubber above the hop rubber into a smaller one? the stock one might be too big causing it to push the hop rubber even in off position.