AG1212 Posted December 15, 2012 Report Share Posted December 15, 2012 Sound I think I might just send it to you then, whenever suits you best. But I warn you, it's in a state and not all due to my hand! It definitely needs new part no. 9 (the posts for the nozzle springs have been removed somehow/for some reason by the previous owner. It also had numerous other issues, probably due to not having nozzle-return springs (which I will supply). Thanks a lot! Quote Link to post Share on other sites
amateurstuntman Posted December 15, 2012 Report Share Posted December 15, 2012 Well, mine has been running fine without any nozzle return springs for months. You don't have to send a mag either, that'll save postage. That way, if I get it running well and then it doesn't for you - we know it's your mags. Quote Link to post Share on other sites
AG1212 Posted December 15, 2012 Report Share Posted December 15, 2012 Sound, just PM me your address and I'll post it over to you Thanks again. Quote Link to post Share on other sites
seniram666 Posted December 29, 2012 Report Share Posted December 29, 2012 just been and picked up one of these, ive read up on the OOTB mods to do. man magazines are hard to find lol!! Quote Link to post Share on other sites
Rob15 Posted December 29, 2012 Report Share Posted December 29, 2012 I'm still trying to find a place that will reply to my emails about getting one custom made from steel. If you're emailing engineering companies/machine shops asking for a price on a single unit of that part then I doubt you will have any luck, when you want hundreds and can put down the cash in advance for the setup and production run you may get some responses otherwise your emails will just get deleted. I could have them milled from steel for you, but you'd probably be able to buy close to 100 Action disconnectors for what it'd cost to set them up and run off a few. Quote Link to post Share on other sites
amateurstuntman Posted December 30, 2012 Report Share Posted December 30, 2012 Ball park figure? Quote Link to post Share on other sites
ollie_ty Posted December 30, 2012 Author Report Share Posted December 30, 2012 Seniram, check ebay. Quote Link to post Share on other sites
seniram666 Posted December 30, 2012 Report Share Posted December 30, 2012 Seniram, check ebay. Yeh been looking only seems to be one US seller with them found an Asian retailer that has KSC one's I assume there the same ? ordered the Dangerwerx barrel adaptor, any one had any experience with fitting an amplifier to it carnt find much on youtube want to make it even louder LOL Quote Link to post Share on other sites
Rob15 Posted December 30, 2012 Report Share Posted December 30, 2012 Ball park figure? There might be some change from £1k on the setup and having some prototypes made (Although I wouldn't be suprised if there wasn't), looking at the design of them I suspect it'd be a faff to actually make them and far more hassle than it's worth, I'd guess you'd be looking at about £100 per disconnector if no more were made after the setup run. Quote Link to post Share on other sites
ollie_ty Posted December 30, 2012 Author Report Share Posted December 30, 2012 Ye im using 4 KSCs and 4 KWAs Quote Link to post Share on other sites
seniram666 Posted December 30, 2012 Report Share Posted December 30, 2012 Ye im using 4 KSCs and 4 KWAs thanks Quote Link to post Share on other sites
amateurstuntman Posted December 31, 2012 Report Share Posted December 31, 2012 Make very sure that you get System 7 mags if you are buying KSC ones. KSC made a short run of MP9s with the old Hard Kick internals so it is possible to buy a KSC MP9 mag that will not work. Again - System 7 is vital, all KWA ones are correct (NS2 is their name for System 7 and they only made it in NS2). There might be some change from £1k on the setup and having some prototypes made (Although I wouldn't be suprised if there wasn't), looking at the design of them I suspect it'd be a faff to actually make them and far more hassle than it's worth, I'd guess you'd be looking at about £100 per disconnector if no more were made after the setup run. That's what I had thought. If I pay myself a nominal £15/hr I could cut one myself with a band saw and files for less than 6 hours' work. I could do it by eye with my non-CNC mill but it doesn't like steel too much. Probably faster with files. I suppose that is how people used to do it before automated machine tools. 1 Quote Link to post Share on other sites
Wild_XIII Posted January 3, 2013 Report Share Posted January 3, 2013 There might be some change from £1k on the setup and having some prototypes made (Although I wouldn't be suprised if there wasn't), looking at the design of them I suspect it'd be a faff to actually make them and far more hassle than it's worth, I'd guess you'd be looking at about £100 per disconnector if no more were made after the setup run. Ouch! I'm yet to receive my spare disconnectors from WGC so I've not got to the place yet. I'll at least see what they say on getting one made. I'm just trying to think what makes them break in my gun, every time I've stripped it for cleaning I've made sure everything is done properly and put back in correctly. Maybe I just have bad luck. I don't know. Quote Link to post Share on other sites
Wild_XIII Posted January 10, 2013 Report Share Posted January 10, 2013 Good news everyone! Thanks for your idea. We're currently making new hop kit for USP45 match and MK23 pistol. MP9 will be our project after that. Regard, Kim. New style hop unit is coming to the MP9! Quote Link to post Share on other sites
ollie_ty Posted January 10, 2013 Author Report Share Posted January 10, 2013 From Ra tech?I was just going to buy the MP7 barrel and jam it in Quote Link to post Share on other sites
Wild_XIII Posted January 10, 2013 Report Share Posted January 10, 2013 From Volante (I might have spelled his name wrong). I went to their website and inquired about it. If you do go with the MP7 hop, let me know how it goes please! Quote Link to post Share on other sites
ollie_ty Posted January 10, 2013 Author Report Share Posted January 10, 2013 (edited) Will do bro, I have high hopes. As soon as Airsoft Taiwan put it on their bloody site! Edited January 10, 2013 by ollie_ty 1 Quote Link to post Share on other sites
amateurstuntman Posted January 27, 2013 Report Share Posted January 27, 2013 (edited) Thinking about selling the MP9. I love it dearly but I don't play all that often and I feel like it's a waste. What does the consensus think I'd get for it? I've got one gun, 7 mags, 2 triple mag pouches, 2 bolts (normal and low power), 2 spare piston heads, a spare piston, a spare disconnector, an NPAS valve, three different recoil springs (for different weather), 2 different rocket valve springs (for different power levels) and a ball bearing race for the spring guide. *edit* and two spare hop rubbers Still just toying with the idea or this would be in the sales threads... Edited January 27, 2013 by amateurstuntman Quote Link to post Share on other sites
ollie_ty Posted January 27, 2013 Author Report Share Posted January 27, 2013 I keep thinking about selling mine too. I think ill get the new version hop up for it, then decide afterwards if its worth keeping. Quote Link to post Share on other sites
AG1212 Posted January 27, 2013 Report Share Posted January 27, 2013 550-650e I'd say, well that's what I'd sell it for. Quote Link to post Share on other sites
amateurstuntman Posted January 27, 2013 Report Share Posted January 27, 2013 I keep thinking about selling mine too. I think ill get the new version hop up for it,then decide afterwards if its worth keeping. Thanks - I have an uneasy feeling, I don't want to sell it and then regret it. I'm satisfied with the accuracy, I just don't get the use out of it I'd like... 550-650e I'd say, well that's what I'd sell it for. That's a lot, go a long way towards a new dry suit. Thanks for the reply. Quote Link to post Share on other sites
Wild_XIII Posted January 31, 2013 Report Share Posted January 31, 2013 I think that with the new hop it should hopefully give it a new lease on life. I have a couple of friends who's G&P WOC rifles have the inner barrels cut down to just above MP9 size and they are tack drivers. Once the MP9 gets the TM style hop, it should make it much more accurate for longer range engagements. Seems as I've spent a fair amount on my MP9 (as I'm sure everyone has!) I'm wanting to get as much use out of it as I can. Once the weather warms up a bit more, I'll be using it in woodland games and I'm sure it'll perform fine. Quote Link to post Share on other sites
3vi1-D4n Posted March 24, 2013 Report Share Posted March 24, 2013 (edited) Questions for everyone here: 1) How do you get more FPS out of this without a barrel extension or powerup silencer? Mine is shooting 375fps w/0.2g at 18*C Its not nearly high enough as a bush primary. 2) How do you increase in the recoil? Not much space for weights on the bolt carrier. Edited March 24, 2013 by 3vi1-D4n Quote Link to post Share on other sites
ollie_ty Posted March 25, 2013 Author Report Share Posted March 25, 2013 We dont do either of those things! Quote Link to post Share on other sites
hwagan Posted March 25, 2013 Report Share Posted March 25, 2013 A tightbore should squeeze a little more out when it comes to FPS, and possibly modifying the nozzle valve to gain a little more. When it comes to adding more recoil, that's not going to happen without killing the gun to be honest. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.