hwagan Posted January 6, 2011 Report Share Posted January 6, 2011 http://shop.ehobbyasia.com/aeg/tokyo-mauri-japan/tokyo-marui-daniel-defense-recce-rifle-recoil-shock-aeg.html In stock... I reckon for about 4 more hours. Quote Link to post Share on other sites
G0LF K4RT Posted January 6, 2011 Report Share Posted January 6, 2011 i'm pretty surprised that the SCAR is less expensive than the recce, even with its licensed DD ris. anyone know if the vfc mk13 will fit on this SCAR? i don't see why it shouldn't but i'd just like to be sure. Quote Link to post Share on other sites
kithooton Posted January 6, 2011 Report Share Posted January 6, 2011 scar l should have more recoil as its got a heavier weight. You wont get the recce .. not in england... that ship has sailed after the first 10min... True they are selling like hot cakes, So is that right, the Scar-L has the harder Kick than the others. M4 Sopmod/Socom/CQB-R/ RECCE & G36 / AK? Due to the Weight being used? I thought that the SCAR-L is Similar to the G36 build and performance. (Recoil) Can't Get my Hands on it and try it against the rest.. Quote Link to post Share on other sites
TheFull9 Posted January 6, 2011 Report Share Posted January 6, 2011 anyone know if the vfc mk13 will fit on this SCAR? i don't see why it shouldn't but i'd just like to be sure. The VFC EGLM doesn't fit to *fruitcage* all, including VFC SCARs some of the time, avoid like the plague. I had one very briefly and sold it on just as fast, really nice launcher totally spoilt by the useless, horribly designed part that the attachment system fit in. Quote Link to post Share on other sites
Richard Y Posted January 6, 2011 Report Share Posted January 6, 2011 Its slightly heavier the weight so it should kick harder.. That said the sopmod has harder recoil springs avaiable for it the scar doesnt.. Quote Link to post Share on other sites
Number5 Posted January 6, 2011 Report Share Posted January 6, 2011 Its slightly heavier the weight so it should kick harder.. That said the sopmod has harder recoil springs avaiable for it the scar doesnt.. Rich, what sort of recoil improvements are you finding from the new recoil springs?! and how is it effecting ROF and battery use if at all!? Ay vids showing the comparison? Quote Link to post Share on other sites
Richard Y Posted January 6, 2011 Report Share Posted January 6, 2011 not really something that would show up on a vid, it feels a little snappyer thats about it, i mean combined with a 9.6v its pretty hard, but its swacking away at 15 a second. Doesnt seem to slow it down any but im on 9,6's id say if some one was still on poorly charged 8.4's it would work but it would probably be slower.. Quote Link to post Share on other sites
kithooton Posted January 6, 2011 Report Share Posted January 6, 2011 Its slightly heavier the weight so it should kick harder.. That said the sopmod has harder recoil springs avaiable for it the scar doesnt.. Where would you find the spring? Web site? Quote Link to post Share on other sites
Gunfighters808 Posted January 7, 2011 Report Share Posted January 7, 2011 Where would you find the spring? Web site? ^^ look in Richard's sig.. ^^ Quote Link to post Share on other sites
Richard Y Posted January 7, 2011 Report Share Posted January 7, 2011 Thats the link to the team site, is does get you there with some digging . Weve got a section on the forum too, we do power springs and recoil springs for the recoil gun series. If I get an ak or scar come in I may well do some for those too. Quote Link to post Share on other sites
L4byr1nth Posted January 8, 2011 Report Share Posted January 8, 2011 Really want one of these - great review. Wonder when we'll see them in the UK.... Ben. Quote Link to post Share on other sites
Gunfighters808 Posted January 18, 2011 Report Share Posted January 18, 2011 looks like Echigoya is now doing a full package upgrade with FET install. I like how they are using the stock insert as the mount/heat sink. anyone get the shortened CQC version from them yet? http://echigoya.militaryblog.jp/e189731.html Quote Link to post Share on other sites
Interficium Posted January 27, 2011 Report Share Posted January 27, 2011 Any particular reason the SCAR-L uses the AK/G36 piston instead of the SOPMOD piston? Can it take SOPMOD pistons OTB without any loss of function? Quote Link to post Share on other sites
Richard Y Posted January 27, 2011 Report Share Posted January 27, 2011 yup Quote Link to post Share on other sites
Interficium Posted February 3, 2011 Report Share Posted February 3, 2011 yup Unfortunately not the case. The notch that sticks out of the top of the piston is too near the piston head for it to engage the recoil weight as it wound back with the sector gear. Still shoots of course, but what's the point without recoil? May try modding the prometheus piston later on down the line to see if I can get it to work with the weight. For now it's a $35 paperweight In any case, here's what my SCAR-L gearbox looks like with the following additions: Prometheus Hard Piston Prometheus Piston Head Prometheus Air Seal Nozzle Prometheus Aero Cylinder Head Prometheus Bearing Spring Guide Prometheus EG Double Torque Hard Gear Set Prometheus 6mm Bearing Axle Hole Lonex Cut-Off Lever Lonex Enhanced Anti-Reversal Latch G&P M170 Devil Jet Motor Have since put the prommy piston head on the stock piston. Quote Link to post Share on other sites
Richard Y Posted February 3, 2011 Report Share Posted February 3, 2011 ahh but at least you found out! and now i know for sure looking good, thats what a gearbox should look like needs a type a or b promy cylinder to complete the look version 3 promy spring guide or 2 ? Quote Link to post Share on other sites
AnakChan Posted February 3, 2011 Author Report Share Posted February 3, 2011 Wow, I haven't even upgraded mine...patiently awaiting the AWS Stealth V2 for recoil shock MB's. So my SCAR-L is still in its dismantled state since I did the review. Q: Misc reports going on about TM recalling back -some- SCAR-L's due to the RIS not matching milspec.Apparently some scopes can't be sit tightly. I've checked mine and my RS Eotech works fine. You may wanna check yours. Quote Link to post Share on other sites
Interficium Posted February 3, 2011 Report Share Posted February 3, 2011 needs a type a or b promy cylinder to complete the look version 3 promy spring guide or 2 ? Hahah, yeah, I guess that brass cylinder looks a bit out of place now. It's the SOPMOD upgrade spring guide so I assume v2. The SCAR-L spring guide has fins on either side that slot into the gearbox but the SOPMOD spring guide seemed to "lock in" at the back of the gearbox fine without them. Wow, I haven't even upgraded mine...patiently awaiting the AWS Stealth V2 for recoil shock MB's. So my SCAR-L is still in its dismantled state since I did the review. Q: Misc reports going on about TM recalling back -some- SCAR-L's due to the RIS not matching milspec.Apparently some scopes can't be sit tightly. I've checked mine and my RS Eotech works fine. You may wanna check yours. Also waiting for the stealth v2. Weird hearing about the recall, of course with the amount of times I've dissassembled my gun I think I'm pretty much kaput when it comes to a recall, especially since I'm in the states, haha. In any case my clone Eotech XPS seems to fit okay. My clone TD stubby foregrip has a bit of wobble to it, though. Can you provide more details about the recall, where you heard about it, etc? Gonna work on the externals next. Grip pod replica + XPS panels + gear sector scout light offset mount + element surefight scout replica + element PEQ. Also gonna try to see if I can get Magpul's fire selector to work as well. Further down the line.... see I can get some ofTangodown's new SCAR stuff to fit on Quote Link to post Share on other sites
Number5 Posted February 3, 2011 Report Share Posted February 3, 2011 Would love to see some pics of your RIF interficium! Has there been any news on the black version? Release date? Will be picking one up when it's released. Quote Link to post Share on other sites
AnakChan Posted February 3, 2011 Author Report Share Posted February 3, 2011 Weird hearing about the recall, of course with the amount of times I've dissassembled my gun I think I'm pretty much kaput when it comes to a recall, especially since I'm in the states, haha. In any case my clone Eotech XPS seems to fit okay. My clone TD stubby foregrip has a bit of wobble to it, though. Can you provide more details about the recall, where you heard about it, etc? Sorry, info in Japanese :- http://echigoya.militaryblog.jp/e186541.html Quote Link to post Share on other sites
Gunfighters808 Posted February 4, 2011 Report Share Posted February 4, 2011 Sorry, info in Japanese :- http://echigoya.militaryblog.jp/e186541.html that's ok. use the english link on the left hand of page, then afterwards scroll down to the calendar and go back to 01-03-2011. Transration! Quote Link to post Share on other sites
DesertFox Posted March 4, 2011 Report Share Posted March 4, 2011 does anybody know any retailers who stock the tm scar-l and is willing to ship to the usa Quote Link to post Share on other sites
aznriptide859 Posted March 5, 2011 Report Share Posted March 5, 2011 Echigoya does. 1 Quote Link to post Share on other sites
DesertFox Posted March 5, 2011 Report Share Posted March 5, 2011 says out of stock on their website Quote Link to post Share on other sites
Richard Y Posted March 5, 2011 Report Share Posted March 5, 2011 Seems like everywheres out of stock for the moment.. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.