wootley Posted August 6, 2013 Report Share Posted August 6, 2013 Evening all, has any one got a internal picture of a standard TM 82 round magazine, I just took one apart and all the bits flew out (my error), just want to make sure I put it all back together 100%. Quote Link to post Share on other sites
Zereck Posted August 7, 2013 Report Share Posted August 7, 2013 I don't have a picture but the only thing that can fly out is the spring that holds(with a little plastic on its end) the bbs in the mag while its not in the gun(don't know its exact name). I know it happened to me too before and until I found the spring(my room was messy ) I used a pen spring(and while it works its weaker than the original spring and the mag can let out some bbs if you hit it hard enough). Quote Link to post Share on other sites
wootley Posted August 7, 2013 Report Share Posted August 7, 2013 Thanks, it's all back together now. Quote Link to post Share on other sites
hiawatha Posted October 17, 2013 Report Share Posted October 17, 2013 Sorry for ot, but har anyone succesfully modded and installed any other pistol grips to their scars ? Quote Link to post Share on other sites
Richard Y Posted October 19, 2013 Report Share Posted October 19, 2013 although the grips are different the fitment should be the same .. at the end of the day both are new v2 both have the same long motors, the same pinions and gear sets.. as with any motor and or grip change youll have to play around with motor hieght. Quote Link to post Share on other sites
lacanuck24 Posted November 19, 2013 Report Share Posted November 19, 2013 Has anyone managed to fit a PWS SRX rail extension to their SCAR? Mine's been sitting there for months since I found that it needs a different mounting block. Quote Link to post Share on other sites
OriginUK Posted December 27, 2013 Report Share Posted December 27, 2013 (edited) Does anyone know where I might get an outter barrel to convert a CQC into a normal Scar-L? I know they do the Laylax one, but I was after a cheaper alternative really. Could you even buy the barrel extension bit on its own? Edited December 27, 2013 by OriginUK Quote Link to post Share on other sites
druid799 Posted December 27, 2013 Report Share Posted December 27, 2013 (edited) Any neg 14 barrel extension will work mate , if you trawel the net you'll find one some were . Edit , Here you go mate ; http://shop.ehobbyasia.com/a-p-s-extend-barrel-110mm-14mm-ccw.html#.Ur4BZX8gGSM Edited December 27, 2013 by druid799 Quote Link to post Share on other sites
OriginUK Posted December 27, 2013 Report Share Posted December 27, 2013 Thanks, I did see some madbul ones but they were way to small. Is that the right thread? Quote Link to post Share on other sites
druid799 Posted December 28, 2013 Report Share Posted December 28, 2013 (edited) Yup , that one is 4 and a bit inches long (I've got one for my 416 recoil) any negative or CCW 14mm threaded 'thing' will fit . Edited December 28, 2013 by druid799 Quote Link to post Share on other sites
OriginUK Posted December 29, 2013 Report Share Posted December 29, 2013 Is the Magpul PTS MIAD grip a straight fit? And does anyone know where you can, or if you can order replacement upper/lower receivers? Have looked over all the asia sites I can think of for these. Thanks. Quote Link to post Share on other sites
OriginUK Posted December 29, 2013 Report Share Posted December 29, 2013 Just to add to the topic: Quote Link to post Share on other sites
Richard Y Posted December 30, 2013 Report Share Posted December 30, 2013 the scar grip is narrower at the top. i would imagine a m4 would fit but it maybe loose. No places stock uppers and lowers for scar... you can find one of the many places that are willing to put a order in at tm, and then wait 3 months if the order ever materializes that is, ive been there my self. Its why i have been working so hard to catagorise, photo and list all tm parts via there part numbers and attempt to keep them instock. Im starting with the popular stuff then i will branch out to all the others. Thus far no one has asked for a TM upper for scar, usually just the latch on the side or stock button., im guessing its a cosmetic thing that you would like to change. by the looks of the part manual http://www.eagle6.co.uk/manuals/Next%20Gen%20AEG%20Manuals/ you are looking at 17800 YEN factory price just for the metal upper Parts - SCAR-10 BLACK and SCAR-11 FDE So its 105 quid not incl delivery to wholesaler, and deliery to uk, or mark up of the wholesaler to order it from the factory for you. Once that gets to the uk youd be looking at £160 - £200 for a upper reciever. IF marui factory has it instock which often they dont. Good example those bloody hop units. Stock latch - http://eagle6.co.uk/shop/catalog/product/view/id/605/s/tokyo-marui-stock-latch-for-scar-recoil-shock-series/ Stock Release Button - http://eagle6.co.uk/shop/catalog/product/view/id/596/s/tokyo-marui-stock-release-button-for-scar-recoil-shock-series/ Quote Link to post Share on other sites
OriginUK Posted December 30, 2013 Report Share Posted December 30, 2013 (edited) Thanks Rich, yeah it was cosmetic, but for that kind of price, it'd be cheaper to have it all cerakoted then re-laser engraved. I'll get back to you with the stock parts, because they are actually broken at the hinge (it is now stuck open and won't fold). I believe it's part 72 and 33 that I need Edited December 30, 2013 by OriginUK Quote Link to post Share on other sites
Jas Posted February 5, 2014 Report Share Posted February 5, 2014 Here is what the inside of my TM-Scar L looks like after 40k~ rounds using 11.1v and 7.4v lipos at 392 FPS. http://imgur.com/a/VTPTR#0 Prometheus 363mm 6.03 barrel Magicbox POM piston head Prometheus hard piston eagle6 M120 Prometheus bearing spring guide SHS Gears Turnigy Nano-tech 1800mah 25-50C 7.4v lipo Turnigy Nano-tech 1800mah 25-50C 11.1v lipo Rewired with 16awg PTFE and deans plugs. Everything else is stock right down to the nylon bushings other than a 3/16 sorbo pad to correct AOE. I have fired around 70k rounds thru this gun in the time I have owned it. Quote Link to post Share on other sites
Zereck Posted February 6, 2014 Report Share Posted February 6, 2014 How is the rof on the 7.4v and 11.1v batteries? Quote Link to post Share on other sites
Jas Posted February 6, 2014 Report Share Posted February 6, 2014 I am not sure, cant get a clean audio clip to check it. Here is a test fire on the 11.1v Quote Link to post Share on other sites
OriginUK Posted February 15, 2014 Report Share Posted February 15, 2014 Latest: Quote Link to post Share on other sites
OriginUK Posted February 16, 2014 Report Share Posted February 16, 2014 Better Quality: 2 Quote Link to post Share on other sites
lee stephenson Posted February 17, 2014 Report Share Posted February 17, 2014 Better Quality: Nice, what scope are you using? Quote Link to post Share on other sites
OriginUK Posted February 17, 2014 Report Share Posted February 17, 2014 It's a VisionKing 1.5-5x Quote Link to post Share on other sites
FTZ-WildeCard Posted February 17, 2014 Report Share Posted February 17, 2014 It's a VisionKing 1.5-5x I just picked one of these up (and a SCAR H funnily enough) at the British Airsoft Show over the weekend. The scope is amazing for the price - very good eye relief and extremely clear. Just waiting on a LaRue mount and I'll be a happy puppy. Quote Link to post Share on other sites
OriginUK Posted February 18, 2014 Report Share Posted February 18, 2014 I just picked one of these up (and a SCAR H funnily enough) at the British Airsoft Show over the weekend. The scope is amazing for the price - very good eye relief and extremely clear. Just waiting on a LaRue mount and I'll be a happy puppy. Nice, they're a good match! Be careful with the cheap "larue" mounts as they don't fit very well, and have a little play in them, causing excess wear to your rail. Can be fixed with some black electrical tape though Quote Link to post Share on other sites
FTZ-WildeCard Posted February 18, 2014 Report Share Posted February 18, 2014 Nice, they're a good match! Be careful with the cheap "larue" mounts as they don't fit very well, and have a little play in them, causing excess wear to your rail. Can be fixed with some black electrical tape though Thanks for the tip - I'll bear that in mind! Quote Link to post Share on other sites
OriginUK Posted February 19, 2014 Report Share Posted February 19, 2014 Anyone know how hard it is to dissassemble the stock and re-wire it completely? Not including the part that goes com the receiver into the stock. Little accident Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.