AnakChan Posted December 27, 2010 Report Share Posted December 27, 2010 In sticking to Gunfighers808 style of Topic Title and Topic Description, this is a very quick initial review of the TM SCAR-L Recoil Shock AEG System released in Japan today. Even though it's released today, a lot of airsoft shops don't have them in stock as the 1st batch of bookings have already met the order quota. I managed to pick mine up in Frontier1, Akabane, Tokyo for Y41,860 (approx USD$504.74). That's actually a little more expensive than Echigoya's International site which advertises for USD$485. As with other TM guns, the external seems reasonably well built. Although there's a tone difference between the upper, lower and grip, it's not as strongly contrasted as VFC SCAR-L's. To me TM's FDE is somewhat a little "earthier" than VFC SCAR-L's. Here's some initial pics :- Unboxing the TM SCAR-L :- A close up of the lower/upper receiver colour difference :- Here's a colour difference between the VFC SCAR-L (Upper) and the TM SCAR-L (Lower). Apologies my VFC SCAR-L looks so dirty as it's been my primary weapon for some time :- I've found the TM grip to be bigger (and therefore more comfortable) than the VFC, which to me has always felt "slender". Also as visible, the selector switch positioning is different, but the magwell on the TM also has an indentation of which VFC's doesn't. Other aesthetic differences includes the hinge for the folding stock, the front flip sight adjustment, the gas block colour (material?), etc. The overall TM receiver length does appear to be a little longer than VFC's but not by much. Later I'll be counting rails. Some other notable differences include :- * TM's charging handle doesn't lock back, you have to hold it back to adjust the hop (which is similar to the TM Sopmod style) * The front barrel extender (at least in the manual) appears to be one piece. That's a pity 'cos it means I can't just unscrew it to make it into a CQB - I could be wrong 'cos I'm just referring to the user manual and haven't physically tried unscrewing it. * The gas block is a dummy, you cannot remove anything like the VFC (i.e. no hop adjustment, or no torque screw driver) * There's wires visible from the receiver to the stock (see below) Also wires are nicely routed within the stock (fuse is barely visible but there), and there's a little swing hook for the battery wires too :- The stock pin is also held nicely in place, without having to worry about losing the locking pin (like the VFC SCAR-L). Once I've charged a battery with a Taimya connector, I can try firing it (all my AEGs use mini-Deans). I've actually already tried this at the Tokyo Victory Show on the 18th Dec and it does have a decent kick. Of course (just like the Sopmod, anyone expecting a GBB-like kick, forget it). 4 Quote Link to post Share on other sites
aznriptide859 Posted December 27, 2010 Report Share Posted December 27, 2010 TM's box art is getting better and better. I'm seriously considering this as a project gun, but there are only 2 things holding me back: 1. Compatibility with PTS MIAD or MOE grip 2. CQB-barrel transform If both of these are doable, I'm definitely getting it after my MAG-K project is done. Quote Link to post Share on other sites
AnakChan Posted December 27, 2010 Author Report Share Posted December 27, 2010 Here's the breakdown from the user manual, that barrel appears to be one-piece :- Larger res available on request, please PM if needed. 1 Quote Link to post Share on other sites
The Reptile House Posted December 27, 2010 Report Share Posted December 27, 2010 (edited) I've found the TM grip to be bigger (and therefore more comfortable) than the VFC, which to me has always felt "slender". Any obvious reason for the fat grip? If VFC can do it, why not TM? I'm assuming the fat grip makes it less authentic - like the usual M4 style airsoft pistol grips. +1 BTW. Edited December 27, 2010 by The Reptile House Quote Link to post Share on other sites
pkm200901 Posted December 27, 2010 Report Share Posted December 27, 2010 is that a metal receiver? thought the real one had a polymer lower. Quote Link to post Share on other sites
AnakChan Posted December 27, 2010 Author Report Share Posted December 27, 2010 Any obvious reason for the fat grip? If VFC can do it, why not TM? I'm assuming the fat grip makes it less authentic - like the usual M4 style airsoft pistol grips. +1 BTW. I'm going to have to speculate here 'cos I don't know what Tokyo Marui's thinking. However I don't think it's a matter of whether TM can or cannot do it. However I do like the bigger grip, it fits better in my hand. A 'quick' calliper measurement across, the VFC is 41.7mm with the TM at 44.8mm. Got my GF to hold it too and it is slightly but noticeably bigger. I still haven't charged my batteries. Once I do I'll do an FPS test. Sorry, I don't have access to a decent range so I won't be able to do accuracy tests. I'll gut it later to see what's inside and will see if a MOE will fit the lower receiver. Quote Link to post Share on other sites
Hatchet Posted December 27, 2010 Report Share Posted December 27, 2010 I guess these means FDE magazines will be readily available for those that want to use them on the other TM AR15 based recoil guns. Quote Link to post Share on other sites
zaimon Posted December 27, 2010 Report Share Posted December 27, 2010 mine is on the way now. this gun is sexy! Quote Link to post Share on other sites
Danke Posted December 27, 2010 Report Share Posted December 27, 2010 Will any parts beside bolt on accesories swap between the VFC and the TM? Quote Link to post Share on other sites
AnakChan Posted December 28, 2010 Author Report Share Posted December 28, 2010 Not quite sure what kind of parts you want to swap, cos as you can guess about the internals, they'll be different (as you've noted), and as for externals well from the pictures you can see above, the stock is different, the hinge to the stock is different. Also as mentioned, the outer barrel appears fixed according to the user manual. But looks like you probably can change the rear flip & FH . The TM version does appear to use standard AEG inner barrels, guess that's interchangeable (therefore same with buckings). So here's the power results. I must say I'm pretty impressed by the stock power, measured with an XCortech X3200. (Looks like [tables] isn't enabled on IP.Board) :- 0.2g G&G Bio BB's (in m/s) 97.05m/s 0.94J 96.64m/s 0.93J 96.35m/s 0.92J 95.11m/s 0.90J 96.51m/s 0.93J 97.01m/s 0.94J 94.95m/s 0.90J 96.39m/s 0.92J 96.07m/s 0.92J 96.92m/s 0.93J Ave: 96.3m/s 0.92J 0.28g G&G Bio BB's (in m/s) 80.81m/s 0.91J 81.10m/s 0.92J 80.67m/s 0.91J 81.27m/s 0.92J 80.50m/s 0.90J 80.73m/s 0.91J 81.56m/s 0.93J 81.13m/s 0.92J 80.67m/s 0.91J 80.90m/s 0.91J Ave: 80.93m/s 0.91J Now for the bummer. For those who think you can drop in the Freedom Art BB Feed extender to use standard magazines, those unfortunately do not simply drop in. The feed extender will need to be modified to fit in. Reason being, the mechbox has these rails that extend forward on either side of the hop chamber that prevents a drop-in extender. However I think with some shaving of the Freedom Art BB Feed extender, it can be made to fit. However if you picked up one of the Pro Arms metal BB feed extenders instead, then you're in for a lot harder work. Quote Link to post Share on other sites
aznriptide859 Posted December 28, 2010 Report Share Posted December 28, 2010 I'm sure some dremeling would fix that up - would just have to make 2 ends a bit flat to fit in there. Quote Link to post Share on other sites
AnakChan Posted December 28, 2010 Author Report Share Posted December 28, 2010 True but not many players out there are techies, that's why I said "not simply drop in". Quote Link to post Share on other sites
Danke Posted December 28, 2010 Report Share Posted December 28, 2010 So you could not swap on the entire lower and mechbox, or the entire stock for example? Maybe with minor re-wiring? Quote Link to post Share on other sites
AnakChan Posted December 28, 2010 Author Report Share Posted December 28, 2010 Danke, Sorry. Maybe I'm not seeing what you have in mind, but I'm going to continue referring to the pictures and user manual parts blowout above. At least to me it looks quite obvious that they're not compatible (see the stock hinge for example, or see the hinge plate in parts blow out as another). Are the pictures not clear enough? If you like I can take close ups if that's what you're after. Quote Link to post Share on other sites
Gunfighters808 Posted December 28, 2010 Report Share Posted December 28, 2010 In sticking to Gunfighers808 style of Topic Title and Topic Description, this is a very quick initial review of the TM SCAR-L Recoil Shock AEG System released in Japan today. Even though it's released today, a lot of airsoft shops don't have them in stock as the 1st batch of bookings have already met the order quota. I managed to pick mine up in Frontier1, Akabane, Tokyo for Y41,860 (approx USD$504.74). That's actually a little more expensive than Echigoya's International site which advertises for USD$485. Why, Thank You Sir! I'm waiting for the Black version to release. I'll wait till you can't hold back any longer and take out the gearbox for pics. I'm really curious to see if they amended or changed the adv. ver.3 box versus the 74mn and 36k to incorporate the cut-off switch and ambi-selector. Awesome initial review!! Quote Link to post Share on other sites
Danke Posted December 28, 2010 Report Share Posted December 28, 2010 Well it's too bad then if the parts can't swap between the 2. I was hoping this would lead to more options for the VFC, and maybe a hybrid between the 2 to ease some of the niggles of the older model (or come up with a shorter outer barrel on the TM). I guess I'll have to decide if it's time to sell the VFC and get a TM. All the gas choices out there now really muddy the water though. Quote Link to post Share on other sites
AnakChan Posted December 28, 2010 Author Report Share Posted December 28, 2010 (edited) With the Recoil Shock range, unfortunately still a large variety of standards. I think we're seeing 4 different mechboxes now (M4, SCAR-L, G36K, AK47/74)?? But the same can be said for the non-EBB mechboxes V1-7. In the EBB range, I'm only familiar with the M4 Sopmod/SOCOM of the Recoil Shock and don't know enough about the G36K nor AK47/74. When I get to the point of butchering my SCAR-L, I'll see if it has interchangeable parts with the Sopmod/SOCOM mechboxes (like gears, ARL, etc.). Update: Sadly like the VFC SCAR-L, MIAD/MOE not compatible too. I don't even need to align it properly for the difference to be noticeable. Of course if one wants to trim/cut/butcher their MIAD, you could make it fit but personally, that'll be too much trouble. Edited December 28, 2010 by AnakChan Quote Link to post Share on other sites
zaimon Posted December 28, 2010 Report Share Posted December 28, 2010 Echigoya has a CQB version of this baby. wow! the short barrel and the PMAG looks so beautiful. Quote Link to post Share on other sites
aznriptide859 Posted December 28, 2010 Report Share Posted December 28, 2010 DAMMIT...the MOE was the deciding factor for me. Jesus am I going to have to go back to the WE SCAR? T_T 1 Quote Link to post Share on other sites
Gunfighters808 Posted December 29, 2010 Report Share Posted December 29, 2010 I'm going to have to speculate here 'cos I don't know what Tokyo Marui's thinking. However I don't think it's a matter of whether TM can or cannot do it. However I do like the bigger grip, it fits better in my hand. A 'quick' calliper measurement across, the VFC is 41.7mm with the TM at 44.8mm. Got my GF to hold it too and it is slightly but noticeably bigger. I still haven't charged my batteries. Once I do I'll do an FPS test. Sorry, I don't have access to a decent range so I won't be able to do accuracy tests. I'll gut it later to see what's inside and will see if a MOE will fit the lower receiver. looks like they're just taking the regular AR-type grip mold that they have and just inject the new color plastic for the gun. cost saving measure. Quote Link to post Share on other sites
AnakChan Posted December 29, 2010 Author Report Share Posted December 29, 2010 First-JP also made their CQB (CQC?) mod, together with their "Quasar" hop mod :- I talked to Echigoya today and the way the shorten it is to cut the barrel short and re-thread for the FH. The standard 300mm inner gets replaced with a 270mm (I'm personally unfamiliar with this length, I know 247mm and 285mm but not 270mm...therefore I don't know if they cut that too). Quote Link to post Share on other sites
Isamu Posted December 29, 2010 Report Share Posted December 29, 2010 What is a "quasar" mod? is it me or the BBs are a bit overhopped? :S 1 Quote Link to post Share on other sites
AnakChan Posted December 29, 2010 Author Report Share Posted December 29, 2010 A little OT, the Quasar mod is FirstJP's commercial name of a hop-up mod. In FortressWeb, they call it LR (for Long Range). The result is for BB's to reach to a greater distance without violating JP's 0.98J rule. The recommendation is to use 0.28g BB's. The original mod was created by a chap called Gunsmith Engineer and it was called the G-Hop (or so I'm told). More info can be found here :- http://forums.airsoftmechanics.com/index.php?topic=3603.0 On the 2nd page of the link above I've done my version of the G-Hop for one of my AEGs and got pretty exceptional results. I'm doing that to all my AEGs/EBBs now. Quote Link to post Share on other sites
Isamu Posted December 29, 2010 Report Share Posted December 29, 2010 Thanks Anak! will read about it and if I have any doubt I will PM you to not hijack the thread Quote Link to post Share on other sites
TB-Stalker Posted December 30, 2010 Report Share Posted December 30, 2010 DAMMIT...the MOE was the deciding factor for me. Jesus am I going to have to go back to the WE SCAR? T_T Well WE are releasing the Open Bolt version of the SCAR-L very soon with both CQB versions and regular ones..... Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.