Grobut Posted February 19, 2011 Author Report Share Posted February 19, 2011 Good stuff beretta, that should hopefully clear up any confusion about how the gun opperates Quote Link to post Share on other sites
adadqgg Posted February 25, 2011 Report Share Posted February 25, 2011 It is very informative, comrade. I am glad to see progression on the progressive airsoft replicas (first there was RealSword SVD, then HP Ppsh, and now this... the glorious mass-produced airsoft PKM does not seem like a dream anymore). Quote Link to post Share on other sites
sc0rpion Posted March 22, 2011 Report Share Posted March 22, 2011 I have one of these and after some initial frustrations i have now sorted i love the thing. Out of the box this baby was hitting 445 consistently through the Crono. The initial problems i hade were as follows. 1:- the hop rubber was ###### so i installed a red Madbull hop rubber which did the trick but the bb's kept dipping awefully. I unwound the hop grub screw and removed it, then i gut a thin peice of hop bucking and carefully dropped it in with fine tweezers, then reinstalled the grub screw, now works a blinder! Point threes are the way forward, this gun now rocks! 2:- Clean the barrel with a good quality cleaning agent, BB flies fab after that along with the above modification. 3:- Srip the internals and clean thouroughly, then regrease the whole damn thing with Black Poly grease, makes the action work wonderfully afterwards. 4:- Heres the really big one. One of the biggest problems i had was that the gun kept over feeding and jamming. I bought a 71p Screwdriver from Wickes, the packaging had 2 rubber grommets holding the screwdriver to the packaging, i skimmed the protruding outer parts off with a scalpel and super glued it into place on the back of the hop unit, this stopped the BB's dropping back and causing the jam, there is a modified hop unit that apparently stops this but its about £40, You work out the maths!! my method works really well. So all in all there you have it, get all those little niggles out the way and you have a fab gun. Thanks for Reading Scorp Quote Link to post Share on other sites
jimmiroquai Posted March 23, 2011 Report Share Posted March 23, 2011 Would you mind posting pics of the mods? Quote Link to post Share on other sites
shiftsup Posted April 7, 2011 Report Share Posted April 7, 2011 I picked up a Version 1 M44 a few weeks ago. This evening I took it apart to try different springs. The stock spring is somewhat shorter than any aeg spring I have; it is also quite firm. After trying 6 or 7 different aeg springs I was able to easily get a Guarder PSG-1 120 spring to fit. I stil have to put the Mosin back together but I will post again with results. Quote Link to post Share on other sites
Pryok poroh Posted July 26, 2011 Report Share Posted July 26, 2011 Does any1 know when the gas bolt is coming on stores? Could that fix the heavy trigger accuracy problem? - Pryok Poroh Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.