Jump to content
MikeLondon

H&K Picture Thread

Recommended Posts

Beautiful...

 

You can't deny the class of a USP.

I like HK weapons, but none off the modern guns have thr class of the '90 weapons.

 

Tom Clancy Rainbow 6 shall always be USP's, MP5's and PSG1's for me, for example :)

 

Sent from my C6603 using Tapatalk

  • Like 2

Share this post


Link to post
Share on other sites

Hmm, odd question, but is there airsoft '9mm' full-size USP, or are the full-sizes all .45 replicas, while some USPc's are 9mm?

Tanaka is 9mm, Tanio Koba was .40 S&W

 

Here is my PSG1 SD build with a v2 gearbox:

 

64nxxy.jpg

 

2hq9vyg.jpg

  • Like 6

Share this post


Link to post
Share on other sites

If you don't upload footage of this in use.. well let me just say I've acquired certain skills over a very long career.

May take a while. Kinda tricky getting the bolt in the gun what with the balls being in the way.

  • Like 2

Share this post


Link to post
Share on other sites

Easy, first I rebuilt my gearbox (which came straight out of my G3) with standard G&P parts (gears, piston, piston head, type 0 cylinder, rapper plate and nozzle), Systema M140 spring, G&P M160 motor, and G&p contacts and wiring. Shoots 450 fps, but I don't have an chrono to check consistency.

 

Installing the V2 gearbox to the lower receiver was simple because I had G3 selector switch and King arms PSG1 hand grip for the G3; it was basically a drop in fit for the lower receiver. The upper receiver requires you to modify the bolt cover and remove the white plastic piece that enables the EBB, then jury rig the second spring to push the bolt forward in place. Or do as I did and use a G3 bolt and cocking tube spring lol. Pretty much as simple as that.

 

Battery is a 11.1v Tenergy Lipo wired to deans and the barrel is a ACM brass 435mm barrel. Not really tuned yet, but I can reach a tree 180ft away at my old house 5 out of 10 shots but the hop up needs a shim job and the barrel needs lapping and an r-hop.

 

Oh, because I wanted something special, I installed an PDI 440mm fluted barrel which gives the echo 1 suppressor an SD look.

  • Like 2

Share this post


Link to post
Share on other sites

Easy, first I rebuilt my gearbox (which came straight out of my G3) with standard G&P parts (gears, piston, piston head, type 0 cylinder, rapper plate and nozzle), Systema M140 spring, G&P M160 motor, and G&p contacts and wiring. Shoots 450 fps, but I don't have an chrono to check consistency.

 

Installing the V2 gearbox to the lower receiver was simple because I had G3 selector switch and King arms PSG1 hand grip for the G3; it was basically a drop in fit for the lower receiver. The upper receiver requires you to modify the bolt cover and remove the white plastic piece that enables the EBB, then jury rig the second spring to push the bolt forward in place. Or do as I did and use a G3 bolt and cocking tube spring lol. Pretty much as simple as that.

 

Battery is a 11.1v Tenergy Lipo wired to deans and the barrel is a ACM brass 435mm barrel. Not really tuned yet, but I can reach a tree 180ft away at my old house 5 out of 10 shots but the hop up needs a shim job and the barrel needs lapping and an r-hop.

 

Oh, because I wanted something special, I installed an PDI 440mm fluted barrel which gives the echo 1 suppressor an SD look.

 

So the receiver/grip is G3-based, not the original PSG1 body?

Share this post


Link to post
Share on other sites

So the receiver/grip is G3-based, not the original PSG1 body?

Nope, PSG 1. PSG1 lower receiver will fit the V2 gearbox, the upper needs modification. The grip from the PSG won't fit the v2 motor. You'll need a King Arms PSG 1 grip for the v2 motor.

Edited by Gunnman

Share this post


Link to post
Share on other sites

Nope, PSG 1. PSG1 lower receiver will fit the V2 gearbox, the upper needs modification. The grip from the PSG won't fit the v2 gearbox.

 

Dammit the grip is my favorite part lol although that makes sense. I'd have to get the KA PSG1 grip right?

 

Did you use a V4 nozzle w/ the stock hopup unit, or a G3 nozzle w/ a new G3 hopup unit?

Share this post


Link to post
Share on other sites

Really, the V4 nozzle is basically the same as the v2 G3 nozzle, so it doesn't matter. I used the PSG 1 hop up unit, which is the same as the G3, only it has the lever so you can load the first bb.

Edited by Gunnman

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.