malcolmg Posted January 28, 2017 Report Share Posted January 28, 2017 They so should have used that grip on the G3SAS (yeah yeah i know, no battery space). Quote Link to post Share on other sites
heroshark Posted January 30, 2017 Report Share Posted January 30, 2017 1 Quote Link to post Share on other sites
Squad 701 Posted February 8, 2017 Report Share Posted February 8, 2017 Heckler & Koch Handguns 9 Quote Link to post Share on other sites
NonEx Posted February 9, 2017 Report Share Posted February 9, 2017 dat VP9... Actually just ordered one yesterday 1 Quote Link to post Share on other sites
Lone_Bullet Posted February 9, 2017 Report Share Posted February 9, 2017 Beautiful... You can't deny the class of a USP. I like HK weapons, but none off the modern guns have thr class of the '90 weapons. Tom Clancy Rainbow 6 shall always be USP's, MP5's and PSG1's for me, for example Sent from my C6603 using Tapatalk 2 Quote Link to post Share on other sites
mightyjebus Posted February 15, 2017 Report Share Posted February 15, 2017 Finally got a sliding stock for my Turkish HK33. It really needs a MKE polymer magazine to finish it off but so far I haven't been able to find one. 7 Quote Link to post Share on other sites
sandstorm Posted February 16, 2017 Report Share Posted February 16, 2017 Hmm, odd question, but is there airsoft '9mm' full-size USP, or are the full-sizes all .45 replicas, while some USPc's are 9mm? Quote Link to post Share on other sites
Horsem4n Posted February 16, 2017 Report Share Posted February 16, 2017 I believe the original Taino Koba and subsequent KJW USPs were a 9mm varient. Quote Link to post Share on other sites
Inspector Posted February 17, 2017 Report Share Posted February 17, 2017 If Marui ever gets around to releasing their full size usp it's based off the 9mm. Quote Link to post Share on other sites
renegadecow Posted February 17, 2017 Report Share Posted February 17, 2017 Friend's WE charging handle broke so I was like I gotchu fam. 10 Quote Link to post Share on other sites
TheFull9 Posted February 17, 2017 Report Share Posted February 17, 2017 If you don't upload footage of this in use.. well let me just say I've acquired certain skills over a very long career. Quote Link to post Share on other sites
Gunnman Posted February 17, 2017 Report Share Posted February 17, 2017 Hmm, odd question, but is there airsoft '9mm' full-size USP, or are the full-sizes all .45 replicas, while some USPc's are 9mm?Tanaka is 9mm, Tanio Koba was .40 S&W Here is my PSG1 SD build with a v2 gearbox: 6 Quote Link to post Share on other sites
renegadecow Posted February 18, 2017 Report Share Posted February 18, 2017 If you don't upload footage of this in use.. well let me just say I've acquired certain skills over a very long career. May take a while. Kinda tricky getting the bolt in the gun what with the balls being in the way. 2 Quote Link to post Share on other sites
blobface Posted February 18, 2017 Report Share Posted February 18, 2017 Can't you just make one of the balls smaller so it bends one way with no obstruction. 1 Quote Link to post Share on other sites
NonEx Posted February 18, 2017 Report Share Posted February 18, 2017 1 Quote Link to post Share on other sites
mksleep Posted February 28, 2017 Report Share Posted February 28, 2017 Power of your PSG1? Why did you change the gearbox? What length is the inner barrel? Quote Link to post Share on other sites
aznriptide859 Posted March 1, 2017 Report Share Posted March 1, 2017 Tanaka is 9mm, Tanio Koba was .40 S&W Here is my PSG1 SD build with a v2 gearbox: Oh my god please tell me how you did the gearbox conversion. Quote Link to post Share on other sites
Gunnman Posted March 2, 2017 Report Share Posted March 2, 2017 Easy, first I rebuilt my gearbox (which came straight out of my G3) with standard G&P parts (gears, piston, piston head, type 0 cylinder, rapper plate and nozzle), Systema M140 spring, G&P M160 motor, and G&p contacts and wiring. Shoots 450 fps, but I don't have an chrono to check consistency. Installing the V2 gearbox to the lower receiver was simple because I had G3 selector switch and King arms PSG1 hand grip for the G3; it was basically a drop in fit for the lower receiver. The upper receiver requires you to modify the bolt cover and remove the white plastic piece that enables the EBB, then jury rig the second spring to push the bolt forward in place. Or do as I did and use a G3 bolt and cocking tube spring lol. Pretty much as simple as that. Battery is a 11.1v Tenergy Lipo wired to deans and the barrel is a ACM brass 435mm barrel. Not really tuned yet, but I can reach a tree 180ft away at my old house 5 out of 10 shots but the hop up needs a shim job and the barrel needs lapping and an r-hop. Oh, because I wanted something special, I installed an PDI 440mm fluted barrel which gives the echo 1 suppressor an SD look. 2 Quote Link to post Share on other sites
Corbeau Posted March 4, 2017 Report Share Posted March 4, 2017 Hand cannon, anyone? 1 Quote Link to post Share on other sites
mightyjebus Posted March 10, 2017 Report Share Posted March 10, 2017 Finally got my TM 416C back up and running after a snapped lower receiver and some dodgy wiring. Now fitted with a BTC Spectre and 7.4V LIPO fits inside the front grip. 10 Quote Link to post Share on other sites
aznriptide859 Posted March 10, 2017 Report Share Posted March 10, 2017 Easy, first I rebuilt my gearbox (which came straight out of my G3) with standard G&P parts (gears, piston, piston head, type 0 cylinder, rapper plate and nozzle), Systema M140 spring, G&P M160 motor, and G&p contacts and wiring. Shoots 450 fps, but I don't have an chrono to check consistency. Installing the V2 gearbox to the lower receiver was simple because I had G3 selector switch and King arms PSG1 hand grip for the G3; it was basically a drop in fit for the lower receiver. The upper receiver requires you to modify the bolt cover and remove the white plastic piece that enables the EBB, then jury rig the second spring to push the bolt forward in place. Or do as I did and use a G3 bolt and cocking tube spring lol. Pretty much as simple as that. Battery is a 11.1v Tenergy Lipo wired to deans and the barrel is a ACM brass 435mm barrel. Not really tuned yet, but I can reach a tree 180ft away at my old house 5 out of 10 shots but the hop up needs a shim job and the barrel needs lapping and an r-hop. Oh, because I wanted something special, I installed an PDI 440mm fluted barrel which gives the echo 1 suppressor an SD look. So the receiver/grip is G3-based, not the original PSG1 body? Quote Link to post Share on other sites
mksleep Posted March 11, 2017 Report Share Posted March 11, 2017 Go for R-hop. 150 spring. Easy (non movement) hits on 70m Type 0 cylinder for 435mm barrel length ok? Quote Link to post Share on other sites
Gunnman Posted March 11, 2017 Report Share Posted March 11, 2017 (edited) So the receiver/grip is G3-based, not the original PSG1 body? Nope, PSG 1. PSG1 lower receiver will fit the V2 gearbox, the upper needs modification. The grip from the PSG won't fit the v2 motor. You'll need a King Arms PSG 1 grip for the v2 motor. Edited March 11, 2017 by Gunnman Quote Link to post Share on other sites
aznriptide859 Posted March 11, 2017 Report Share Posted March 11, 2017 Nope, PSG 1. PSG1 lower receiver will fit the V2 gearbox, the upper needs modification. The grip from the PSG won't fit the v2 gearbox. Dammit the grip is my favorite part lol although that makes sense. I'd have to get the KA PSG1 grip right? Did you use a V4 nozzle w/ the stock hopup unit, or a G3 nozzle w/ a new G3 hopup unit? Quote Link to post Share on other sites
Gunnman Posted March 11, 2017 Report Share Posted March 11, 2017 (edited) Really, the V4 nozzle is basically the same as the v2 G3 nozzle, so it doesn't matter. I used the PSG 1 hop up unit, which is the same as the G3, only it has the lever so you can load the first bb. Edited March 11, 2017 by Gunnman Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.