Gunmane Posted March 3, 2014 Report Share Posted March 3, 2014 Just when I started looking at RK.95 again... If only the battery space wasn't against me. Quote Link to post Share on other sites
Yuri Posted March 3, 2014 Report Share Posted March 3, 2014 What kind of scope mount have you got on there Eizen? Looks cool. Quote Link to post Share on other sites
Eizen Posted March 3, 2014 Report Share Posted March 3, 2014 The issued one with small defects, straight from the factory. I can't really comment anything else. Quote Link to post Share on other sites
artfromchaos Posted March 10, 2014 Report Share Posted March 10, 2014 Before AfterMuch afterParts list: Hephaestus steel trigger setFG high speed bufferFG low flow systemRA-Tech wood handguard (refinished in red mahogany and rit-dye)RS bakelite gripMaple Leaf 75 degree Hop-Up Rubber Custom reinforced trigger box 3 Quote Link to post Share on other sites
TheFull9 Posted March 10, 2014 Report Share Posted March 10, 2014 #fabulous 15 Quote Link to post Share on other sites
NonEx Posted March 10, 2014 Report Share Posted March 10, 2014 #swaggio Quote Link to post Share on other sites
Tauron Posted March 10, 2014 Report Share Posted March 10, 2014 (edited) Got my pic for the RS SVD and VFC AK74UN for last week's skirm taken got to treat that mag for a more bakelite-ey finish, but all my other mags are steel AK47 mags or black polymer midcaps Edited March 10, 2014 by Tauron Quote Link to post Share on other sites
Roland1014 Posted March 11, 2014 Report Share Posted March 11, 2014 Before After Much after Parts list: Hephaestus steel trigger set FG high speed buffer FG low flow system RA-Tech wood handguard (refinished in red mahogany and rit-dye) RS bakelite grip Maple Leaf 75 degree Hop-Up Rubber Custom reinforced trigger box Base gun? Quote Link to post Share on other sites
adrian_geot Posted March 11, 2014 Report Share Posted March 11, 2014 Nice work artfromchaos! Quote Link to post Share on other sites
umisodachi Posted March 12, 2014 Report Share Posted March 12, 2014 My GBB AK 1 Quote Link to post Share on other sites
TheFull9 Posted March 12, 2014 Report Share Posted March 12, 2014 Nice guns umisodachi. Be interested to get some details on parts used in the two modern examples there please. I'm hoping to build something similar in the not-too-distant future. Quote Link to post Share on other sites
DrAlexanderTobacco Posted March 12, 2014 Report Share Posted March 12, 2014 #fabulous Close the thread guys, we're done here. 7 Quote Link to post Share on other sites
umisodachi Posted March 12, 2014 Report Share Posted March 12, 2014 Nice guns umisodachi. Be interested to get some details on parts used in the two modern examples there please. I'm hoping to build something similar in the not-too-distant future. Hello,CKinnerley. It is the AK in the middle, but it is a thing that you have modified the AK-74 of KSC. Upon remodeling, we are slotted by cutting the selector lever. Hand guard is fitted with a hand guard of X47 type of electric air gun for. In addition, there was a need to sharpen both the gas tube and hand guard is what I've used. Grip is fitted with a "Magpul MOE AK Grip". There is a need to sharpen the grip within the installation. However, when attached to the AK KSC of the MOE grip, you can is a gap in the rear because there is a step on the base body. I have exchange of electric air gun for the "AR Stock adapter" stock. It has a tube fitted with a stock of electric air gun for, I replaced the stock to "VLTOR IMOD Stock Standard type". It is attached by processing the Tokyo Marui AK-102 Front Sight Front site.It is the flash hider of this one, but the mounting MagpulPTS AAC flash hider. I am adding to the screwing charging handle on the left side of the other. It is the right of AK followed, but it is one that was modified a little WE AKM PMC. Replace to "VLTOR IMOD Stock Standard type" the stock is this one, I have replaced the "UltiMAK type rail hand guard" the hand guard. Replace the 3PLUNG Haider, just installed a T-1 dot site and flash light after. I'd appreciate it if accustomed to reference these parts. 2 Quote Link to post Share on other sites
artfromchaos Posted March 13, 2014 Report Share Posted March 13, 2014 Base gun? WE-AK Series Nice work artfromchaos! Thanks Quote Link to post Share on other sites
Nath Posted March 14, 2014 Report Share Posted March 14, 2014 #fabulous So much swag . 1 Quote Link to post Share on other sites
T3CH Posted March 14, 2014 Report Share Posted March 14, 2014 Project gun I'm ressurecting. It was a full length AKM clone, but I needed a shorter (and FAR lighter) backup to it's bigger brother (which has for some reason gained a 40mm launcher ). This has since aquired a rail top foregrip. I know the stock lock is broken, I've bodged it temporarily until I can get areplacement. Quote Link to post Share on other sites
scuba stu Posted March 16, 2014 Report Share Posted March 16, 2014 I know its not an ak but I love it all the same my realsword type 56 1 Quote Link to post Share on other sites
howitzer Posted March 16, 2014 Report Share Posted March 16, 2014 The real sword AEGs are beautiful. How is your stock holding up? Mine's gone all wobbly, lots of play in it. Need to get it sorted. Quote Link to post Share on other sites
scuba stu Posted March 17, 2014 Report Share Posted March 17, 2014 hi mate the stock was a bit loose on mine but I fitted a washer on the right hand side where the stock meets the body and the blood stopper on the rear of the stock and field dressing tapped on front of stock seem to have stopped it mate Quote Link to post Share on other sites
PureSilver Posted March 18, 2014 Report Share Posted March 18, 2014 How are the Type 56-1s to shoot? It must be completely impossible to get a cheek weld with the underfolder. Quote Link to post Share on other sites
howitzer Posted March 18, 2014 Report Share Posted March 18, 2014 hi mate the stock was a bit loose on mine but I fitted a washer on the right hand side where the stock meets the body and the blood stopper on the rear of the stock and field dressing tapped on front of stock seem to have stopped it mate Thanks for that information, will try that on mine. Quote Link to post Share on other sites
scuba stu Posted March 19, 2014 Report Share Posted March 19, 2014 (edited) hi puresilver the realsword is awesome to shoot mate no probs with the feel and balance the stock is spot on mate . no probs howitzer get some pics up soon mate lbe great to see your type56 Edited March 19, 2014 by scuba stu 1 Quote Link to post Share on other sites
Gish Posted March 20, 2014 Report Share Posted March 20, 2014 Silent enemy remover.King Arms VSS 1 Quote Link to post Share on other sites
renegadecow Posted March 20, 2014 Author Report Share Posted March 20, 2014 That's just about the funniest looking Kalashnikov I've seen. Quote Link to post Share on other sites
Horsem4n Posted March 20, 2014 Report Share Posted March 20, 2014 what do you suggest? making a new thread for 9mm russian carbines? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.