kojak Posted May 5, 2014 Report Share Posted May 5, 2014 LCT AS VAL. I'll make a review thread when I have time this weekend. Battery space in the suppressor is almost nonexistent, but it looks easy enough to get some wires out the back and into a battery bag. My only other complaint is that you can't adjust the hopup without removing the dust cover, but other than that it's great! Please, no more airsoft colostomy bags. It's designed to fit separated flat cell type lipo batteries: http://www.hobbyking.com/hobbyking/store/__901__900__Airsoft_Accessories-Lipoly_Batteries.html 1 Quote Link to post Share on other sites
DFM56 Posted May 5, 2014 Report Share Posted May 5, 2014 (edited) Please, no more airsoft colostomy bags. It's designed to fit separated flat cell type lipo batteries: http://www.hobbyking.com/hobbyking/store/__901__900__Airsoft_Accessories-Lipoly_Batteries.html A 1200mah 20c 11.1v won't pull an SP130 on 13:1s. I'm having a custom battery bag made for the stock, it won't look too bad. Edited May 5, 2014 by DFM56 Quote Link to post Share on other sites
Roland1014 Posted May 6, 2014 Report Share Posted May 6, 2014 looks like I'm in for the ride, ordered the VAL. WIP trading my V2 FE for a V3. Couldn't get any spare mag :/ Quote Link to post Share on other sites
aznriptide859 Posted May 6, 2014 Report Share Posted May 6, 2014 Why DFM, why T_T Quote Link to post Share on other sites
DFM56 Posted May 6, 2014 Report Share Posted May 6, 2014 looks like I'm in for the ride, ordered the VAL. WIP trading my V2 FE for a V3. Couldn't get any spare mag :/ I think fox airsoft is the only one that has them right now. $15 for a 50 round mid is a little too expensive for me, though. I'm sort of holding out for larger mags from LCT.. The mids out now are single stack, but theres plenty of room in the shell for double so I'm not sure why they didn't do that. Why DFM, why T_T Because my life is incredibly empty and the tears of strangers on the internet are the only things that bring me joy? But seriously, the lipos that actually fit are grossly inadequate for what I want to do with the gearbox. Plus, I want to run a 74u length inner and do.. things.. with the suppressor, so this was the only way. It's pretty clean and I can easily patch the only visible hole in the stock if I need to. Quote Link to post Share on other sites
kojak Posted May 6, 2014 Report Share Posted May 6, 2014 A 1200mah 20c 11.1v won't pull an SP130 on 13:1s. I'm having a custom battery bag made for the stock, it won't look too bad. This one should at 25-50c and it's really tiny, leaving plenty of room in the can for whatever else might find its way in there. It just seems odd to bodge up such a specific replica like a parts bin G36, but I guess it's no worse looking than a p-star nailgun hose. Maybe wrap with Russki tourniquet and/or stick the battery in a field dressing wrapper? Quote Link to post Share on other sites
PureSilver Posted May 6, 2014 Report Share Posted May 6, 2014 That's the problem with drilling holes in your very expensive new gun - sometimes someone comes along with a solution that might have obviated the need to do so... 1 Quote Link to post Share on other sites
Roland1014 Posted May 6, 2014 Report Share Posted May 6, 2014 Plus, I want to run a 74u length inner and do.. things.. with the suppressor Nyet nyet nyet that is my idea! Quote Link to post Share on other sites
DFM56 Posted May 6, 2014 Report Share Posted May 6, 2014 This one should at 25-50c and it's really tiny, leaving plenty of room in the can for whatever else might find its way in there. It just seems odd to bodge up such a specific replica like a parts bin G36, but I guess it's no worse looking than a p-star nailgun hose. Maybe wrap with Russki tourniquet and/or stick the battery in a field dressing wrapper? I just ordered one to try out, thanks. I've used turnigy cells around that size and I think their ratings are pretty optimistic, but I'll see how it does for a day on one of my more stressful setups. I normally use lipos double that size with continuous discharge ratings higher than that burst value so I'm interested to see how it will do.. Good idea on the tourniquet and field dressing wrap as well, I'll track some down since I've been meaning to replace the battery bag on my 74u with one. Quote Link to post Share on other sites
judgeman Posted May 9, 2014 Report Share Posted May 9, 2014 Got bored. Went bling. 2 Quote Link to post Share on other sites
renegadecow Posted May 10, 2014 Author Report Share Posted May 10, 2014 Is that paint or did you go bananas with a buffing wheel? Quote Link to post Share on other sites
chaoslord800 Posted May 10, 2014 Report Share Posted May 10, 2014 King Arms VSS: 5 Quote Link to post Share on other sites
Murdoc Posted May 10, 2014 Report Share Posted May 10, 2014 Nice VSS chaoslord800 !!! An one question! Do this steel side bracket fit on DBOYS steel AKs??? I mean do the holes fit??? (Te screw diameter is another question...) Because I ran on mine with CYMA one... Quote Link to post Share on other sites
HardcoreCook Posted May 10, 2014 Report Share Posted May 10, 2014 In my opinion it should fit, because AK's are quite universal. In case the holes are too tight, surely using a slightly bigger drill would work, in order to make the holes bigger, right? Quote Link to post Share on other sites
Murdoc Posted May 10, 2014 Report Share Posted May 10, 2014 (edited) My fear is grounded in CYMA's pot metal side mount vs. DBoys/Kalash receiver incompatibility... The middle hole is in totally different position... 2-3 mm... that's too much... Edited May 10, 2014 by Murdoc Quote Link to post Share on other sites
judgeman Posted May 10, 2014 Report Share Posted May 10, 2014 That is acrylic paint. Montana Gold. It's an evolving work in progress, I need to add a little bit of brown to imitate ivory. It's eventually going to wind up in a display case mounted on my wall. Quote Link to post Share on other sites
-Drake- Posted May 21, 2014 Report Share Posted May 21, 2014 Some minor updates. VFC AKS74 LCT AMD65 LCT AK105 6 Quote Link to post Share on other sites
Gunmane Posted May 21, 2014 Report Share Posted May 21, 2014 Drake, I applaud you sir, the envy is strong with you. Quote Link to post Share on other sites
Isamu Posted May 21, 2014 Report Share Posted May 21, 2014 Nice guns, Drake, which optic and rail are you using in the ak105? Quote Link to post Share on other sites
-Drake- Posted May 21, 2014 Report Share Posted May 21, 2014 Its the LCT AK Upper rail system, optic is a Russian kobra (rail mounted version). It did have the side mounted version fitted previously but it obviously doesn't allow you to fold the stock while its fitted, which makes the railed upper quite useful. Also allows you to fit all kinds of blasphemous doodad's... Quote Link to post Share on other sites
Isamu Posted May 21, 2014 Report Share Posted May 21, 2014 Rail mounted kobra? my wallet cryes in envy and pain... =,( Thanks for the info and gratuitous gun pr0n pic Quote Link to post Share on other sites
Seraphim989 Posted May 21, 2014 Report Share Posted May 21, 2014 Drake, what's the optic on the AMD? I rather like the look of that... Quote Link to post Share on other sites
-Drake- Posted May 21, 2014 Report Share Posted May 21, 2014 Its one of those Trijicon RX06-14 Reflex Sight replica's, I think it suits those ultimak style rails pretty well. Quote Link to post Share on other sites
Murdoc Posted May 21, 2014 Report Share Posted May 21, 2014 It did have the side mounted version fitted previously but it obviously doesn't allow you to fold the stock while its fitted, which makes the railed upper quite useful... Same reason I put rail on my AKSU top cover (to thell the trouth I put 47'-type top cover on it...). Nobody else understood it in my team... Quote Link to post Share on other sites
sigma3 Posted May 21, 2014 Report Share Posted May 21, 2014 That's gotta be the strangest 104 I've ever seen. It's well done, but it's really really odd. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.