[-=O=-]^{Woozie} Posted December 31, 2014 Report Share Posted December 31, 2014 My WE AK PMC GBBR. Modded and Upgraded by Darklite. 4 Quote Link to post Share on other sites
Murdoc Posted December 31, 2014 Report Share Posted December 31, 2014 (edited) Not sure the plastic to be strong enough to support a moving stock. The rear of the gearbox is very close to the stock and there are really no place to create a metal support here. I would dig it with fix M4 tube, PRS stock, and long "RPK-12" config. Nice work BTW... Edited December 31, 2014 by Murdoc Quote Link to post Share on other sites
T3CH Posted December 31, 2014 Report Share Posted December 31, 2014 Not sure the plastic to be strong enough to support a moving stock. The rear of the gearbox is very close to the stock and there are really no place to create a metal support here. The replacement of the internals (gearbox V3, hopup and barrel) was very easy. Original: Looks like plenty of room in the front end to stuff a LiPO into. As for the folding stock maybe a 3d printed adapter to fit over the original mount for the stock and shorten the current stock a bit? Quote Link to post Share on other sites
ninja master of coffee Posted December 31, 2014 Report Share Posted December 31, 2014 Now that it's officially approved by the military expect a race between the usual names to come out with one. But yours will still be the first. It is? Also, whatever happened to Izmash making AEGs? I am liking the AK-12, very good work!! Quote Link to post Share on other sites
DrAlexanderTobacco Posted December 31, 2014 Report Share Posted December 31, 2014 If memory serves, Atacka.com were the retailer partnering up with Izhmash to bring these to market - but looking at their online store, can't see any mention of them. I'm guessing a standard run-of-the-mill dispute between the two companies resulted in a termination of their agreement. Quote Link to post Share on other sites
Horsem4n Posted December 31, 2014 Report Share Posted December 31, 2014 (edited) well, probably not atacka as much as NPO. atacka just distributes niche russian guns from NPO, Gletcher/WG, and all that over here in the US. you can look through their website http://npoaeg.ru/ but then again, atacka is kinda *suitcase* at letting people know what's going on. Edited December 31, 2014 by Horsem4n Quote Link to post Share on other sites
Roland1014 Posted January 1, 2015 Report Share Posted January 1, 2015 IIRC Atacka emails Izhmash monthly for progress updates on their AEG Quote Link to post Share on other sites
Gunmane Posted January 1, 2015 Report Share Posted January 1, 2015 http://www.airsoftgi.com/product_info.php?products_id=19589 That didn't take long for a repaint. Quote Link to post Share on other sites
mightyjebus Posted January 1, 2015 Report Share Posted January 1, 2015 it's the same AEG made in black. I suspect there is an OEM and Well and Blackviper are 3rd parties or BV are another name for Well. I've ordered one (transparent) to see what I can do. So far I'm looking at 3Ding a new flash hider, making a more realistic stock along with stripping the internals and fitting a mosfet'd metal V3 gearbox, new hop unit and inner barrel. I think there is enough room at the back of the receiver to make the folding stock a working model and I'll have a look at the mag release when it turns up. I think it's possible to make a working push button like the real thing. The other thing I'll be looking at is making it easy to change batteries as this will move to the top of the gearbox instead of the stock. Quote Link to post Share on other sites
chas Posted January 3, 2015 Report Share Posted January 3, 2015 Does anyone know where to get a cheap Dboys/Cyma (VFC compatible) AKMS body? Quote Link to post Share on other sites
mightyjebus Posted January 8, 2015 Report Share Posted January 8, 2015 Fake left side selector and longer flash hider knocked up in Sketchup I'll start the stock next 2 Quote Link to post Share on other sites
blobface Posted January 9, 2015 Report Share Posted January 9, 2015 Got the Zenit pistol grip as well but I don't really like it after putting it on, so reverted back to Bakelite. GHK based Zenit built! 5 Quote Link to post Share on other sites
renegadecow Posted January 10, 2015 Author Report Share Posted January 10, 2015 (edited) I think they were designed with gloves in mind. Just too angular for bare hands. And which make DTK-4 is that if I may ask? Edited January 10, 2015 by renegadecow Quote Link to post Share on other sites
blobface Posted January 10, 2015 Report Share Posted January 10, 2015 (edited) I'm planning to get some spray paint / oil mix on a rag and start rubbing and burning it to give it a used finish... It's made in Russia I think. http://kitgun.ru/collection/frontpage/product/dtk-4-kochevnik Pretty cheap, $25 usd. Edited January 10, 2015 by blobface Quote Link to post Share on other sites
mightyjebus Posted January 10, 2015 Report Share Posted January 10, 2015 can anyone tell me the 2 sizes in the picture below? Quote Link to post Share on other sites
DarkLite Posted January 10, 2015 Report Share Posted January 10, 2015 I think I might need help: Three GBB AKs, all WE/LCT builds. I now have 13 magazines. 5 Quote Link to post Share on other sites
scorch Posted January 10, 2015 Report Share Posted January 10, 2015 Me gusta. Quote Link to post Share on other sites
renegadecow Posted January 10, 2015 Author Report Share Posted January 10, 2015 What's the muzzle device on the top most? I keep seeing that around but never catch what it's called. And does anyone know if there are replicas of that AKS74U flash hider that's usually in bare metal, kinda looks like the original but with the flared end cut off? Quote Link to post Share on other sites
hitmanNo2 Posted January 10, 2015 Report Share Posted January 10, 2015 Got the Zenit pistol grip as well but I don't really like it after putting it on, so reverted back to Bakelite. GHK based Zenit built! Nice. Detail on the grip/light combo please? I've seen them around but don't know their name, availability e.t.c. Quote Link to post Share on other sites
blobface Posted January 10, 2015 Report Share Posted January 10, 2015 (edited) It's the Zenit B-11 handguard, B-16 Rail extension, RK-0 Foregrip and 2P Klesh light. All from Russian Thunder. One thing worth keeping in mind is that the GHK AKS74U handguard retainer is cast steel instead of stamped like you'd find on real ones, which means it's significantly thicker, and the B-16 rail extension isn't able to clamp on the handguard while clearing the retainer, I bought a d-boy one from WGC just now so when it arrives I hope that it will be thinner and would work with it, right now the retainer is just wedged there between the gas block and the handguard, but due to the lack of extra space the handguard is hanging on there pretty securely. Edited January 10, 2015 by blobface Quote Link to post Share on other sites
hitmanNo2 Posted January 10, 2015 Report Share Posted January 10, 2015 Excellent. Cheers. I shall check out Russian Thunder. Quote Link to post Share on other sites
mightyjebus Posted January 11, 2015 Report Share Posted January 11, 2015 Stock hinge for AK12 taking shape Quote Link to post Share on other sites
johny_blaze Posted January 11, 2015 Report Share Posted January 11, 2015 So I joined the AK owners club again - sold my G&G Combat Machine and found a friend that was selling his LCT 104 for the same ammount of money the same day. 2 Quote Link to post Share on other sites
CALLAHAN_88 Posted January 11, 2015 Report Share Posted January 11, 2015 I think I might need help: Three GBB AKs, all WE/LCT builds. I now have 13 magazines. Love the short one! Quote Link to post Share on other sites
[-=O=-]^{Woozie} Posted January 12, 2015 Report Share Posted January 12, 2015 It's okay Darklite.You can give them all to me. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.