Carter Posted March 12, 2011 Report Share Posted March 12, 2011 One more A&K SR25K question! Can it still accept the silencer that the full sized version comes with? Or, even better, aftermarket SR25/M110 style silencers? Link to post Share on other sites
SpecialistR Posted March 15, 2011 Report Share Posted March 15, 2011 One more A&K SR25K question! Can it still accept the silencer that the full sized version comes with? Or, even better, aftermarket SR25/M110 style silencers? Not unless you change out the gas block. Link to post Share on other sites
bruin757 Posted March 16, 2011 Report Share Posted March 16, 2011 Here's my KAC arsenal so far. Plan on getting a SR-16 CQB and an LMG (whenever they come out) in the near future, but I'm pretty happy with it so far. My favorite is my KA SR-16E3. Upgrades: FULLY upgraded, including m170 spring (this is my DMR), reinforced torque gears, G&P m170 motor, dimpled outer barrel, AWS Stealth mosfet, and pretty much everything else inside upgraded as well. My CQB gun is the Bravo KAC PDW Upgrades: high-speed setup w/ Element high speed motor, 13:1 gears, 11.1v lipo, AWS Stealth mosfet (coming soon), etc. Also picked up a KWA SR-10. Other than the camo paint job & all the external add-ons, it's pretty much stock. And of course the WE KnightHawk .45. Great sidearm. Link to post Share on other sites
SpecialistR Posted March 17, 2011 Report Share Posted March 17, 2011 Scratch my post above,I read over your question too quickly and somehow thought you were talking about the M110. The SR25k should accept the silencer without mods. Too late to edit my post. Link to post Share on other sites
MinAmmo Posted March 18, 2011 Report Share Posted March 18, 2011 My Brand New King Arms SR-16 E3 Link to post Share on other sites
ian@wca Posted April 17, 2011 Report Share Posted April 17, 2011 My Viper GBBR, with Prime KAC receiver: Link to post Share on other sites
08kecarv Posted April 17, 2011 Report Share Posted April 17, 2011 My Viper GBBR, with Prime KAC receiver: ...snip... GOOD gOD Mighty fine, worthy additions to our thread!!! Link to post Share on other sites
bladerunner168 Posted April 26, 2011 Report Share Posted April 26, 2011 The world needs more KAC stuff First up, AFC KAC Open Chamber. Have RA Tech NPAS and TBB's ready at hand but too lazy to install. RS C-MORE Tactical, RS Surefire M900V, G&P Dual Laser Illuminator Second up, my SR16 DMR build. This is my 4th attempt at a KAC SR build . Original base was the KA SR16 but pretty much everything was upgraded. Externals: Magpul UBR Stock OD Magpul Grip OD Magpul Trigger Guard G&P KAC style outer barrel 16" Magpul MBUS Sights OD Magpul RVG OD Mojji Killer Elite SMG Scope RS Surefire M952V DE Internals: Systema Revolution GB (M110) Systema Magmum Motor Systema Hop Up Madbull Hop Bucking (Blue) TM HX23/33 inner barrel Link to post Share on other sites
Sleepy_UK Posted April 27, 2011 Report Share Posted April 27, 2011 Ian@wca: that my friend is bootiful!.... Those prime receivers are so nice and really do it justice! Link to post Share on other sites
slu Posted April 27, 2011 Report Share Posted April 27, 2011 bladerunner: Correct your white balance, please. Link to post Share on other sites
bladerunner168 Posted April 27, 2011 Report Share Posted April 27, 2011 bladerunner: Correct your white balance, please. WB was set at 200, it was edited to have that effect. Link to post Share on other sites
slu Posted April 27, 2011 Report Share Posted April 27, 2011 it was edited to have that effect. Oh, in that case, nvm. Interesting effect! WB was set at 200, 200 Kelvin? That is far below the visible spectrum. Link to post Share on other sites
bladerunner168 Posted April 27, 2011 Report Share Posted April 27, 2011 Oh, in that case, nvm. Interesting effect! 200 Kelvin? That is far below the visible spectrum. Sorry, hard day at work, can't tell a**s from elbow, ISO was set at 200, WB was probably set at default Link to post Share on other sites
08kecarv Posted April 28, 2011 Report Share Posted April 28, 2011 @bladerunner: Why did you mount the MBUS on the URX front sight? Two is one, one is none? Just asking Link to post Share on other sites
bladerunner168 Posted April 28, 2011 Report Share Posted April 28, 2011 Good question, somehow I broke the retention scheme on the front sight, the front MBUS is to "clamp down" the original front sight. Link to post Share on other sites
Mirska Posted May 20, 2011 Report Share Posted May 20, 2011 Work in progress SR15E3. @Ian P good job on that SBR. Link to post Share on other sites
DFM56 Posted May 31, 2011 Report Share Posted May 31, 2011 I cooked up this monstrosity a few hours ago for a friend. Liquid wrench is my new best friend. Link to post Share on other sites
huntER_HuntED Posted May 31, 2011 Report Share Posted May 31, 2011 Needs a crane stock Love it though! Link to post Share on other sites
DFM56 Posted May 31, 2011 Report Share Posted May 31, 2011 I know! He hates retractable stocks though, I couldn't talk him into it. I'm building him a midlength front end on his CA AR10 next with a bit of magpul next, should turn out pretty well. Link to post Share on other sites
Sinner101GR Posted May 31, 2011 Report Share Posted May 31, 2011 I've been out of the game for a long time, but decided to get back in. I've had a lot of parts from my regular shooting stuff lying around...I simply needed to buy a gun again. VFC SR-15E3 10.5" VFC PEQ15 Aimpoint T-1 Surefire M600C w/GearSector mount Magpul AFG2 Magpul MBUS2 Rear 2x Tango Down covers waiting on the fake Triple Tap from EBB. Link to post Share on other sites
fiddlesticks4220 Posted June 1, 2011 Report Share Posted June 1, 2011 Coulda bought a worse gun Link to post Share on other sites
Sinner101GR Posted June 2, 2011 Report Share Posted June 2, 2011 Coulda bought a worse gun nonsense. This is a terrible LPEG, of course. Link to post Share on other sites
Bando Posted June 7, 2011 Report Share Posted June 7, 2011 those that know can you fit a ready mag to a KAC PDW? Link to post Share on other sites
komplikation Posted June 8, 2011 Report Share Posted June 8, 2011 I don't think a Redi-Mag would fit on the PDW. It looks like the left-hand magazine release would interfere with it. Link to post Share on other sites
Recommended Posts