wolfgeorge Posted September 24, 2012 Report Share Posted September 24, 2012 Renegadecow that is sooo beautiful... Please post some more pics of it! Wolf Quote Link to post Share on other sites
WhiteHawksan Posted September 24, 2012 Report Share Posted September 24, 2012 (edited) RC stop *fruitcaging* everyone's keyboards with amazing builds. Edited September 24, 2012 by WhiteHawksan Quote Link to post Share on other sites
renegadecow Posted September 26, 2012 Report Share Posted September 26, 2012 But that one was old. All I did was touch it up a bit. This one however is new. I've improved the ergonomics a bit by adding a slight palm swell and a hint of a thumb rest. But more importantly at least I could now skirmish with the damn thing. Color doesn't look too well on fluorescent, will decide in the morning if I'll refinish it. Quote Link to post Share on other sites
renegadecow Posted September 27, 2012 Report Share Posted September 27, 2012 Colors ok. Looks much better in natural light. Quote Link to post Share on other sites
DarkLite Posted September 27, 2012 Report Share Posted September 27, 2012 DAMNIT RENEGADECOW THESE TROUSERS WERE NEW Quote Link to post Share on other sites
FireKnife Posted September 27, 2012 Report Share Posted September 27, 2012 Very nice grips, shame they are on one of those revolvers But then again I still have my STARS grip to fondle thanks to you 'FireKnife' Quote Link to post Share on other sites
renegadecow Posted September 28, 2012 Report Share Posted September 28, 2012 (edited) Aaand I just had to redo them. Slightly slimmed it down and restained in wenge/ebony. Edited September 28, 2012 by renegadecow Quote Link to post Share on other sites
Bando Posted September 28, 2012 Report Share Posted September 28, 2012 looked better the first time imo Quote Link to post Share on other sites
PianoBlack Posted September 28, 2012 Report Share Posted September 28, 2012 The G&P ACOG arrived today after spending a week at the New York Customs depot (really strange as I'm on the other coast and normally Alaska or California is where the package is routed). I'm extremely pleased with the end result. There's some wobble between the upper and lower receivers, but that's normal as the screw that holds on the plastic stock normally tightens this up. It doesn't affect accuracy though and I don't really notice it. I purchased a SAAV, which I modified by cutting out the dividers so I can use it with the 7.62mm magazines and it holds them really well. Cheers and enjoy, Piano Quote Link to post Share on other sites
demoncase Posted December 31, 2012 Report Share Posted December 31, 2012 Little something I finished before Christmas. Because shooting an M14 with a plastic stock is like trying to eat a chocolate bar with the wrapper still on Quote Link to post Share on other sites
SpankyTheDolphin Posted January 2, 2013 Report Share Posted January 2, 2013 Also have one of those Matebas, but with the fake wood. Quote Link to post Share on other sites
EOL Posted January 2, 2013 Report Share Posted January 2, 2013 Quote Link to post Share on other sites
ToaDi Posted February 2, 2013 Report Share Posted February 2, 2013 Refinished the stock on my SKS. Was nice and worn but the bb hits just look off-putting. Sanded down, filled in dents and reapplied shellac plus I've gone and weathered the bolt and bayonet a bit. That is one particularly sexy gun, never seen one of these in airsoft before. Is it one of your own project pieces? Gotta say guns do look so much sexier with wood furniture Quote Link to post Share on other sites
renegadecow Posted February 2, 2013 Report Share Posted February 2, 2013 Yep, that's a custom piece. It's archived in the projects section but I also made a video montage of it: Quote Link to post Share on other sites
ToaDi Posted February 2, 2013 Report Share Posted February 2, 2013 That is absolutely amazing, you really need to start your own company, and watch your products fly off the shelf. I'm assuming the 30rnd shotgun cartridge is what you are using for a magazine Quote Link to post Share on other sites
demoncase Posted February 6, 2013 Report Share Posted February 6, 2013 Some Tanaka porn, all with real wood Incidentally- if anyone has a Tanaka revolver they are interested in selling or trading, give me a shout Quote Link to post Share on other sites
wolfgeorge Posted February 6, 2013 Report Share Posted February 6, 2013 Wolf Quote Link to post Share on other sites
renegadecow Posted March 7, 2013 Report Share Posted March 7, 2013 Here's wood that's simulating to look like plastic that's simulating to look like wood! Quote Link to post Share on other sites
volante Posted May 4, 2013 Report Share Posted May 4, 2013 KTW winchester carbine + CAW wood kit + gas unit. Quote Link to post Share on other sites
blobface Posted May 4, 2013 Report Share Posted May 4, 2013 Renegadecow you are amazing..!That SKS...! So you're basically using 30 round magazines by inserting the Marui shells? I'm daydreaming of one day owning a SKS-M based on GHK gbb internals... I assume you have a pretty established DIY workshop at home? Quote Link to post Share on other sites
renegadecow Posted May 6, 2013 Report Share Posted May 6, 2013 Just a modest workbench. Some power tools and a surface to work on really. Quote Link to post Share on other sites
DarkLite Posted May 6, 2013 Report Share Posted May 6, 2013 KJW CZ-75 with markings and some rosewood grips: DBOYs AKSU with LCT foregrip and modified CYMA Ultimak: Quote Link to post Share on other sites
demoncase Posted May 7, 2013 Report Share Posted May 7, 2013 That CZ's a thing of beauty Quote Link to post Share on other sites
renegadecow Posted May 8, 2013 Report Share Posted May 8, 2013 (edited) Man, that's CZexy. There, I said it. Gonna sit in the corner of shame for a while. Edited May 8, 2013 by renegadecow Quote Link to post Share on other sites
aznriptide859 Posted May 9, 2013 Report Share Posted May 9, 2013 Krink Ultimak FTW Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.