LeeCustom Posted July 31, 2013 Report Share Posted July 31, 2013 Iron Airsoft 416 kit with Viper Tech Internals 7 Quote Link to post Share on other sites
vilerk Posted July 31, 2013 Report Share Posted July 31, 2013 (edited) Needs bigger RDS IMO. What about a Trijicon SRS? The Comp M4 was just thrown on from another gun for a skirmish, didn't have time to source sights for it. Probably won't, as I'm thinking of selling the gun. Not a fan, I'm afraid. The clubfoot/grip and the banana mags don't work together at all - it's a clash of angles - and the less said about the silver barrel and matching Triple Tap, the better. IMO the SR-47 is rare enough to be visually striking in its original configuration with KAC panels, 3rd-generation M4 stock, and the Obermeyer barrel and flash hider for compatibility with the KAC suppressor. I completely agree, this gun is just a cluster***k of parts that came together out of boredom. Kinda wanted to make a "trollish" gun, but it's novelty is starting to wear off. Though I like the barrel chromed, brings out the dimples Edited July 31, 2013 by vilerk Quote Link to post Share on other sites
PianoBlack Posted July 31, 2013 Report Share Posted July 31, 2013 Not a fan, I'm afraid. The clubfoot/grip and the banana mags don't work together at all - it's a clash of angles - and the less said about the silver barrel and matching Triple Tap, the better. IMO the SR-47 is rare enough to be visually striking in its original configuration with KAC panels, 3rd-generation M4 stock, and the Obermeyer barrel and flash hider for compatibility with the KAC suppressor. There's something about an all black SR47, which is why I'm currently replacing the Magpul PTS and MIAD with a VFC Crane Stock and A2 grip. I'm keeping the RS KAC URX III, Dytac dimple barrel, and VFC triple tap break though. -Piano Quote Link to post Share on other sites
Noveske Posted July 31, 2013 Report Share Posted July 31, 2013 I don't know if I like it yet.. That 416 stock and chrome barrel don't not work for me. Other than that, I like the SR-47. Quote Link to post Share on other sites
Elvis Posted July 31, 2013 Report Share Posted July 31, 2013 My Viper xm177e2 Before: After: 4 Quote Link to post Share on other sites
blablabla Posted July 31, 2013 Report Share Posted July 31, 2013 Purrrrdy... Quote Link to post Share on other sites
PureSilver Posted July 31, 2013 Report Share Posted July 31, 2013 My Viper xm177e2 Was it... green? Did someone two-tone a Viper or is that just the way the photo looks? Also, in my opinion, it was better as a true XM177E2. What's the new barrel from - M16? Quote Link to post Share on other sites
BaBaBooey Posted July 31, 2013 Report Share Posted July 31, 2013 Was it... green? Did someone two-tone a Viper or is that just the way the photo looks? Also, in my opinion, it was better as a true XM177E2. What's the new barrel from - M16? The Viper gun I had also had an awful blue/green finish. The barrel is probably a 14.5 x 0.625...Colt commonly referred to them as the "M16A1 Carbine" although it was never type classified by the US military. The receivers were never Property marked and generally had commercial M16A1 markings. They do show up in old military photos because of their "COTS" program where they purchased commercial items, not just weapons, for military use. Another unique feature of the real gun was what Colt called a compact "shortie" buffer...among other things. 1 Quote Link to post Share on other sites
DeltaZero Posted July 31, 2013 Report Share Posted July 31, 2013 (edited) Looks like a M653 to me... Lovely rifle! I have an AEG version, would love to make my LM4 into one! Please ignore Magpul pistol grip! It's since been changed for an A2. Unfortunately I couldn't get hold of an A1! Unfortunately it's up for sale though Edited July 31, 2013 by DeltaZero 1 Quote Link to post Share on other sites
Finbarqs Posted July 31, 2013 Report Share Posted July 31, 2013 Iron Airsoft 416 kit with Viper Tech Internals how'd you get viper internals? Did you have to drill for the bolt catch pin? I think everything is okay until the GFPA, which is specific to viper, unless heavily modified. 1 Quote Link to post Share on other sites
kylec Posted August 1, 2013 Report Share Posted August 1, 2013 Systema PTW MAX PDI Inner Barrel Daniel Defense MK18 RIS II, MK12 gas block Real steel carbine gas tube, bolt catch spring Troy Ambi mag release, Front/rear Tritium Battlesights EOTech 512 PTS Blackout 51T Flash Hider Magpul Handstop, RSA, Trigger guard BCM Gunfighter Charging Handle FCC MOE Grip Almost done with it.. 1 Quote Link to post Share on other sites
emp3ror86 Posted August 1, 2013 Report Share Posted August 1, 2013 Yeah, bring the Vipers and the old school stuff! Quote Link to post Share on other sites
blablabla Posted August 1, 2013 Report Share Posted August 1, 2013 Hell yeah !!, the bottom one is the same as above 3 Quote Link to post Share on other sites
emp3ror86 Posted August 1, 2013 Report Share Posted August 1, 2013 Once I spent ah hour looking for that bottom picture. Awesome guns, they always make me want to buy something less modern. Quote Link to post Share on other sites
Smoke Posted August 1, 2013 Report Share Posted August 1, 2013 WE XM177, chopped down a bit. Just whacked an NPAS, Angry Gun 6.03 and a Firefy soft in there, and she shoots great Quote Link to post Share on other sites
TB-Stalker Posted August 1, 2013 Report Share Posted August 1, 2013 Wow that M16 is stunning! Nice job Bla! Quote Link to post Share on other sites
BaBaBooey Posted August 2, 2013 Report Share Posted August 2, 2013 This was a PRIME M16A1 lower built for WA type gas guns...they actually did a fairly good job replicating a Vietnam era Colt built M16A1. They even got the markings and serial number range correct (1968) so I attached a E-Type stock and matching grip. Unfortunately, the original finish and the upper receiver that came with it was a giant mess. I ditched the upper and tried to make a Mk12 Mod1 to NAVSPEC: 2 Quote Link to post Share on other sites
k30dxedle Posted August 2, 2013 Report Share Posted August 2, 2013 (edited) Nice! I like the optic zoom throw lever. Can't remember who makes them off the top of my head, but you're the first airsofter I've seen to use one. Edited August 2, 2013 by k30dxedle Quote Link to post Share on other sites
LeeCustom Posted August 2, 2013 Report Share Posted August 2, 2013 (edited) I know Larue makes cat tails for various optics. Finbarqs, on 31 Jul 2013 - 1:26 PM, said: how'd you get viper internals? Did you have to drill for the bolt catch pin? I think everything is okay until the GFPA, which is specific to viper, unless heavily modified. The IA 416 lower has holes for the bolt catch pin, though it seems over sized, so might have to widen the hole on the bolt catch itself. I'll find out how much modifications it takes to get the GFPA to fit soon. From my understanding, the GFPAs were made to replace the old Ino's firing blocks which were WA firing blocks. Don't quote me on that though. Edited August 2, 2013 by LeeCustom Quote Link to post Share on other sites
LeeCustom Posted August 2, 2013 Report Share Posted August 2, 2013 (edited) Edited August 2, 2013 by LeeCustom Quote Link to post Share on other sites
Finbarqs Posted August 2, 2013 Report Share Posted August 2, 2013 I know Larue makes cat tails for various optics. Finbarqs, on 31 Jul 2013 - 1:26 PM, said: The IA 416 lower has holes for the bolt catch pin, though it seems over sized, so might have to widen the hole on the bolt catch itself. I'll find out how much modifications it takes to get the GFPA to fit soon. From my understanding, the GFPAs were made to replace the old Ino's firing blocks which were WA firing blocks. Don't quote me on that though. I have both ino and viper, from 2009, 2011 ino and 2012 viper. It's quite different. The firing block will not fit in each other, viper did some custom mod to the WA system. Quote Link to post Share on other sites
TB-Stalker Posted August 2, 2013 Report Share Posted August 2, 2013 Does anyone have any pictures of a RS Colt M4A1s serial number? Looked for a US military issued one preferably! Quote Link to post Share on other sites
BaBaBooey Posted August 2, 2013 Report Share Posted August 2, 2013 Does anyone have any pictures of a RS Colt M4A1s serial number? Looked for a US military issued one preferably! Hi. I can't say for sure what range the numbers are...I've seen a few US Property marked M4's and M4A1's and they all started with a "W" prefix with 6 digits...so "W######". Also, the markings are not engraved. I'm sure you can find one on the internet? Quote Link to post Share on other sites
The Reptile House Posted August 2, 2013 Report Share Posted August 2, 2013 Updates: SMR WIP - I've just stuck the upper on a KAC lower, so it can be used. Still quite a way to go on this, to get it right. Noveske build - final iteration, hopefully! Thanks to bladerunner168 for inspiration on the tweaks to this version. 4 Quote Link to post Share on other sites
TB-Stalker Posted August 2, 2013 Report Share Posted August 2, 2013 Does anyone have any pictures of a RS Colt M4A1s serial number? Looked for a US military issued one preferably! Thank you, got it sorted now, chosen my serial number for my new lower Updates: SMR WIP - I've just stuck the upper on a KAC lower, so it can be used. Still quite a way to go on this, to get it right. Noveske build - final iteration, hopefully! Thanks to bladerunner168 for inspiration on the tweaks to this version. So you were the man who had his barrel painted by PPTW! I had a suspicion! I'm looking forward to seeing what direction you go in with the SMR and the lower, I know what you mean about the KAC, I'm going to swap mine out for a Troy. 1 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.