Noveske Posted August 14, 2013 Report Share Posted August 14, 2013 (edited) All of the parts arrived either yesterday or today. The LM4's barrel nut is slightly larger than real steel, hence the gap on the C4 FSP. -Piano Welcome to the Cent Arms club Edited August 14, 2013 by Noveske Quote Link to post Share on other sites
PianoBlack Posted August 14, 2013 Report Share Posted August 14, 2013 Thanks Noveske, if I get a second upper, I'll join the Fortis club too. -Piano Quote Link to post Share on other sites
Manxmadman Posted August 14, 2013 Report Share Posted August 14, 2013 Probably my only contribution to this monster of a thread, think the rest of my ARs are on the plain side so haven't bothered with pictures of them. Taken quite a bit of time to build this DMR, thrown quite a bit of cash into the externals and also the internals to get it running very sweet. Taken using an iPhone 5 camera so not the best quality going, didn't have much better to hand at the time. Cable tie across the stock is gone, was trying to work out the best thing to do for a decent size battery solution in terms of securing a mag pouch on the stock. 1 Quote Link to post Share on other sites
judgeman Posted August 14, 2013 Report Share Posted August 14, 2013 (edited) Slowly working on a thing via a friend old CA. It's a Honey Badgerish deal, or it will be when it's finished. Front / rear sights are horrendous. Existing M4 outer barrel was cut down and re-assembled, suppressor is home made PVC. Stock is from a ICS. Grip will be a black Magpul MIAD if I can track one down. Internals will be stock TM Ver 2. Edited August 14, 2013 by judgeman Quote Link to post Share on other sites
DeltaZero Posted August 14, 2013 Report Share Posted August 14, 2013 KWA LM4. My first GBBR, I am very impressed! Completely Sold! Would sell the CTW if I didn't want to keep it as a back up! This thing is just phenomenal! Parts List as follows: - KWA LM4 - Madbull DD MK18 12.5" RIS - KAC Iron Sights - KAC Muzzle Break - Magpul RSA - Surefire M600 Scout light - HS Offset Thorntail Mount - Magpul Go Gas Pedal - Magpul RVG - Mix of Magpul XTM and KAC rail covers - Clone Spectre DR Scope 4x Fixed - Magpul USA MOE Grip - Magpul PTS MOE Stock - PTS PMAG Celcius CTW Team Alpha. Taken me a while to piece it all together but i'm very happy with it, its fantastically lightweight with cracking range. Very chuffed! Parts list as follows: - Celcius Team Alpha CTW - MDD Hop + Reformation barrel - Magpul Trigger Guard - Celcius Crane Stock - G&P Storm Grip - Noveske NSR 11" Keymod Rail + Rail attachment - Inforce WML - Magpul VFG - FCC Blackout 12.5" Outerbarrel - ACM Surefire FH556-216A Flash Hider - Vision King 1.25-5x26 Short Dot scope - Larue SPR Mount - Magpul ASAP Sling Plate 3 Quote Link to post Share on other sites
Noveske Posted August 15, 2013 Report Share Posted August 15, 2013 Slowly working on a thing via a friend old CA. It's a Honey Badgerish deal, or it will be when it's finished. Front / rear sights are horrendous. Existing M4 outer barrel was cut down and re-assembled, suppressor is home made PVC. Stock is from a ICS. Grip will be a black Magpul MIAD if I can track one down. Internals will be stock TM Ver 2. Those sights looks like they were from a KJW KC-02. Quote Link to post Share on other sites
validtumoralarm Posted August 15, 2013 Report Share Posted August 15, 2013 (edited) I have a question that you guys may be able to help with. I'm getting bored of my Block II setup and am considering changing into a Barrett Rec7. The issue is that I'd need to add a Madbull 9" Omega X rail. Will this fit a G&P upper receiver thread? I'm not even sure how those mount. I have the G&P barrel nut for my RIS II, but I'm pretty sure that's not how it works. And since this is a picture thread, here are some (pretty awful) pictures of my rifle as it stands. Edited August 15, 2013 by validtumoralarm 1 Quote Link to post Share on other sites
MRF Posted August 15, 2013 Report Share Posted August 15, 2013 Nice one!What brand is this RIS II? Quote Link to post Share on other sites
TheFull9 Posted August 15, 2013 Report Share Posted August 15, 2013 To my knowledge Madbull use the more generic TM spec thread that most AEGs have on them, G&P are different. Given that the Omega X use its' own barrel nut rather than clamping to a standard one as the Omega does, I don't think that plan is terribly likely to work without modification to the upper receiver. The tool that madbull themselves make might do the job, but I'm not too certain on that if I'm honest. Quote Link to post Share on other sites
mimesis Posted August 15, 2013 Report Share Posted August 15, 2013 (edited) Madbull Omega X with mounting barrel nut. As just pointed out, the metric thread on the Madbull nut is unlikely to be happy with the imperial thread on the G&P receiver. Given that the RIS II nut is not that different from the Omega, conceivably the Omega might fit on the G&P RIS II nut, but I'd want to hear first from someone who had done it. Edited August 15, 2013 by mimesis Quote Link to post Share on other sites
validtumoralarm Posted August 15, 2013 Report Share Posted August 15, 2013 The RIS II is either MB or SOCOMGear. I can't remember. I seem to have gotten lucky with the finish on it, though. It looks like the barrel nuts are the same. I looked on DD's site and it says that the Omega X uses their "Bolt Up" mounting system, which is the same as the RIS II. If that's the case, then I have the G&P spec nut. Quote Link to post Share on other sites
akiraspeedstar Posted August 15, 2013 Report Share Posted August 15, 2013 KWA LM4C MK18 MOD 0 4 Quote Link to post Share on other sites
Failcat Posted August 16, 2013 Report Share Posted August 16, 2013 (edited) Hey guys! New toy. VFC HK416 CQB I know that everyone and their mother has a 416 now-a-days, but I couldn't resist building one. Externals:Magpul PTS AAC suppressor & compensator Laylax suppressor kitMagpul XTM enhanced rail panelsSurefire M600c Scout tactical lightSurefire KM2 White/IR output headSurefire Dual Output pressure switchG&P KAC style iron sightsMagpul PTS ASAPMagpul RSAMagpul PTS MIAD gripMagpul ACS-L stockG&P ambidextrious magazine releaseG&P buffer tube (sanded and buffed)Internals:PolarStar Gen. 1 Fusion Engine w/ Gen. 2 hardwarePolarStar Black NozzlePrototype Low-Flow Poppet Valve (to spec. with Red)ProWin hopup chamberPrometheus purple buckingDeepfire H-NubPDI 6.05 285mm tight bore barrel Edited August 16, 2013 by Failcat 3 Quote Link to post Share on other sites
PureSilver Posted August 16, 2013 Report Share Posted August 16, 2013 Oy vey - those trades! Who engraved War and Peace on the right-hand side of the magazine well? Is this Umarex's doing? Personally if I wanted a 'CQB' HK416 and was able to exercise the freedom of Polar*, I would've bought the HK416C. But still, nice rifle. Quote Link to post Share on other sites
aznriptide859 Posted August 16, 2013 Report Share Posted August 16, 2013 Yup, it's the we Americans have to deal with when buying any HK *suitcase* over here. Quote Link to post Share on other sites
Failcat Posted August 16, 2013 Report Share Posted August 16, 2013 'Murica! And I love the 416c, but I couldn't get over the stupid stock on that thing. Wasn't really too comfy for me haha. Thanks guise! Quote Link to post Share on other sites
judgeman Posted August 17, 2013 Report Share Posted August 17, 2013 Those sights looks like they were from a KJW KC-02. Because they are, at least for the moment. It was a "what I had at the moment" sort of thing. I plan to eventually replace them with Magpul sights. Quote Link to post Share on other sites
GhostWolf Posted August 17, 2013 Report Share Posted August 17, 2013 New arrival, and this one ain't going anywhere WE based N4 Noveske Diplomat, need to add a magnifier with flip to side mount and a PEQ 15. Maybe a BAD Lever and anit-rotation pin if I can work that one out. Also some RS KAC rail covers. 1 Quote Link to post Share on other sites
private_ruud Posted August 17, 2013 Report Share Posted August 17, 2013 g&p m16a3 parts: -acm acog + real deal killflash -g&p peq -real deal ka grip -acm m16 sling -acm buis 3 Quote Link to post Share on other sites
CplHicks Posted August 17, 2013 Report Share Posted August 17, 2013 Better pic 2 Quote Link to post Share on other sites
Bucko Posted August 18, 2013 Report Share Posted August 18, 2013 Ghostwolf, that looks oddly familiar... What barrel did you use? (Here's mine. WE base too) 4 Quote Link to post Share on other sites
GhostWolf Posted August 18, 2013 Report Share Posted August 18, 2013 (edited) Ghostwolf, that looks oddly familiar... What barrel did you use? (Here's mine. WE base too) Heres the list,consist of Noveske 7.25 inch outer barrel, Noveske 7.5 inch RIS, G&P Noveske sound hog/fire pig, LMT GBBR crane stock. Internally, full RA-TECH set of upgrades including full trigger set and NPAS. Edited August 18, 2013 by GhostWolf 1 Quote Link to post Share on other sites
TheGreatMrPoo Posted August 19, 2013 Report Share Posted August 19, 2013 VFC SR635 Gen 3 Red nozzle, Low flow poppet valve Prommy barrel with Prommy Hop up Rhop Troy handguards w/ KAC hand stop VLTOR Crane stock KAC Flip up sights T-1 Aimpoint Replica Magpul MITER silencer AAC 51T functional bolt catch Ambi selector switch Quote Link to post Share on other sites
Rogue845 Posted August 19, 2013 Report Share Posted August 19, 2013 Just finished my latest project - an M16 Dissipator type build. I still need a couple of things for it, such as a more suitable receiver and a weaponlight, but overall I'm happy with it as it is. 1 Quote Link to post Share on other sites
hiawatha Posted August 19, 2013 Report Share Posted August 19, 2013 Another 416 and a sopmod, both TM next gen recoils. 1 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.