Beeingmyself Posted January 26, 2016 Report Share Posted January 26, 2016 (edited) Not to be opposite but... Okay I have a little to much time on my hands while I wait for parts to arrive. Found this Tapco style sling mount on Ebay for 1.25$ so why not. Still can decide weather to get a CTR stock with extended butt pad my little project here has the same weight sooo... This was about 30minutes with a boxcutter will give it a little finish later on. Just had to see how it looked. Edited January 26, 2016 by Beeingmyself Quote Link to post Share on other sites
hitmanNo2 Posted January 26, 2016 Report Share Posted January 26, 2016 I take it the sling mount is steel? I'm not sure if I would trust one of my babies hanging from a $1.25 sling mount lol Quote Link to post Share on other sites
Beeingmyself Posted January 27, 2016 Report Share Posted January 27, 2016 It is actualy steel and it has so far put wih me testing it with my pipe wrenth just to see if I will smash my Holusun sigt but running a 2-point sling. Quote Link to post Share on other sites
wally254 Posted January 27, 2016 Report Share Posted January 27, 2016 My fun little run n' gun. Based off an old G&G Combat machine. Using it as my current test bed - trying out the Jefftron V2 mosfet trigger unit right now. How you getting on with the Jefftron? I was looking at getting one of the internal ones that slot into the gearbox as I'm struggling getting a spectre but I was put off with it only rated for 20rps. I see you've exceeded that. Quote Link to post Share on other sites
DarkLite Posted January 27, 2016 Report Share Posted January 27, 2016 How you getting on with the Jefftron? I was looking at getting one of the internal ones that slot into the gearbox as I'm struggling getting a spectre but I was put off with it only rated for 20rps. I see you've exceeded that. Mixed bag. This particular fet works brilliantly so far, but I've heard that they can be damaged by trigger overtravel, so it depends on the gearbox you drop it into. You can fix it by filing your trigger down where it engages the trigger switch, but it's something that shouldn't really have to be done. Also, I got a Ver 3 trigger unit replacement fet from Jefftron which worked really well up until it fried itself out of the blue about 2000 shots after installation. Not a particularly stressful set up either, M100 on 18:1s and a ferrous motor with 11.1v 40c battery. Quote Link to post Share on other sites
wally254 Posted January 27, 2016 Report Share Posted January 27, 2016 Mixed bag. This particular fet works brilliantly so far, but I've heard that they can be damaged by trigger overtravel, so it depends on the gearbox you drop it into. You can fix it by filing your trigger down where it engages the trigger switch, but it's something that shouldn't really have to be done. Also, I got a Ver 3 trigger unit replacement fet from Jefftron which worked really well up until it fried itself out of the blue about 2000 shots after installation. Not a particularly stressful set up either, M100 on 18:1s and a ferrous motor with 11.1v 40c battery. I'm using 13:1 and HT motor with a 7.4v Lipo and have an 11.1v ready to slot in once I get the lacking of mosfet problem sorted. Had high hopes after initially finding out about the Jefftrons but looks like I'll be waiting for the elusive spectre to show its face. Quote Link to post Share on other sites
DarkLite Posted January 27, 2016 Report Share Posted January 27, 2016 Well, my V2 board is working fine so far, fingers crossed. The V3 board is a brand new mosfet so it could just be teething troubles. Quote Link to post Share on other sites
blam360 Posted January 27, 2016 Report Share Posted January 27, 2016 which mount is that? looks higher than the standard larue copy I have Quote Link to post Share on other sites
Whitehawk Posted January 31, 2016 Report Share Posted January 31, 2016 which mount is that? looks higher than the standard larue copy I have It is a higher version of it, called SPR/M4 1.93" Mount QD LT135. Basically the same, just a bit higher to clear peq. Atleast King-Arms makes a replica of it. Quote Link to post Share on other sites
Horsem4n Posted February 1, 2016 Report Share Posted February 1, 2016 (edited) Darklite, what grip do you have on the last gun you posted? Howed they get the steeper grip angle on an AEG? EDIT: nvm, its the daytac grip right? I can see that they hold the motor similarly to VFC HKs. Edited February 1, 2016 by Horsem4n Quote Link to post Share on other sites
DarkLite Posted February 1, 2016 Report Share Posted February 1, 2016 Darklite, what grip do you have on the last gun you posted? Howed they get the steeper grip angle on an AEG? EDIT: nvm, its the daytac grip right? I can see that they hold the motor similarly to VFC HKs. Yes and Yes. I honestly don't notice much of a difference unless I have the stock all the way in. 1 Quote Link to post Share on other sites
Bostitch Posted February 6, 2016 Report Share Posted February 6, 2016 Lightly moded TM SR16 TrYing to decide whether to keep it as-is, or go MBK and have a little fun. I would almost feel bad doing that though, as these are getting hard to find. New to me G&G Wombat machine raider...just a little backup/loaner gun that i traded a we g19 for. Surprisingly sturdy and reliable so far. Has upgraded barrel and hopup. Still need to crack it open and work on the compression. Quote Link to post Share on other sites
Alias1983 Posted February 6, 2016 Report Share Posted February 6, 2016 Leave the tm be. Quote Link to post Share on other sites
EOL Posted February 8, 2016 Report Share Posted February 8, 2016 My PTW/CTW 1 Quote Link to post Share on other sites
Skarclaw Posted February 9, 2016 Report Share Posted February 9, 2016 Leave the tm be. Obviously never used one... get a metal body ASAP. Quote Link to post Share on other sites
Alias1983 Posted February 9, 2016 Report Share Posted February 9, 2016 I use gas Quote Link to post Share on other sites
Maveric Posted February 13, 2016 Report Share Posted February 13, 2016 (edited) WE M4/M203 (GBBr) Edited February 13, 2016 by Maveric 7 Quote Link to post Share on other sites
TheFull9 Posted February 13, 2016 Report Share Posted February 13, 2016 Can you move the nice AR please? I need to meditate at the stone and get an extra character upgrade point. 3 Quote Link to post Share on other sites
Katotaka Posted February 13, 2016 Report Share Posted February 13, 2016 Someone left his AR at some save point 1 Quote Link to post Share on other sites
kojak Posted February 14, 2016 Report Share Posted February 14, 2016 CCP with CCC forend: MP4K 2 Quote Link to post Share on other sites
Bando Posted February 18, 2016 Report Share Posted February 18, 2016 after i broke my G&P m4's upper trying to remove the Delta ring i went back to my KISS CA m15a2 5 Quote Link to post Share on other sites
Bostitch Posted February 21, 2016 Report Share Posted February 21, 2016 Back again with another TM, this time an m4a1... Now I'm debating throwing the RIS from my sr16 onto this one, selling it, then using the sr16 internals to build a new SBR.. 2 Quote Link to post Share on other sites
Brandon C Posted March 1, 2016 Report Share Posted March 1, 2016 My beloved Armalite AR-15 (G&P M16vn) seen here with my '60s SAS Borneo' kit display... 4 Quote Link to post Share on other sites
Alias1983 Posted March 2, 2016 Report Share Posted March 2, 2016 Nice a1 Quote Link to post Share on other sites
Brandon C Posted March 2, 2016 Report Share Posted March 2, 2016 Speaking of A1s, my two seen here... . Some of my Carbines too... G&P M733 aka Colt M16A2 Commando G&P XM177E1 aka Colt Model 609 Commando G&P M653 aka M16A1 Carbine 5 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.