Jump to content
KTcerberus

AR15 Variants and Derivitives Picture Thread

Recommended Posts

Quick pic of my new toy.

Actually not new - I bought this one from a friend. External alternations in relation to stock KA Larue 9.0 are pretty obvious ;). Internally it's a pure stock. This far. 10 inch steel outer barrel is a two piece Element.

 

8234632355_340d4f37fa_b.jpg

 

Talking about externals - in my opinion it's the one of the best looking out of the box guns on market - I can definitely put it in the line with G&P MRP IMHO.

Most likely I will go for some Cerakote Armory Black treatment in the future...

Edited by MRF

Share this post


Link to post
Share on other sites

Glad You like it :).

I agree with You on T1. Well, I just need another gun and T1 for it, because I like Comp M4 a lot ;).

  • Like 1

Share this post


Link to post
Share on other sites

OK.

 

Here are some more descent shots. Maybe these are not the most attractive angles man can get, but considering lack of lighting equipement I am still depenedent to natural light and related camera position.

I really like the look of this rig, although I haven't had an opportunity to shot it yet.

 

8240418363_3c3510b062_b.jpg

8241481556_8bfa2556b5_b.jpg

  • Like 1

Share this post


Link to post
Share on other sites

Please note, that MOE grip is a chinese clone.

And I have to say, You can't go any better for ~10$. Differences between this one and PTS latest model, are minor, hard to see - just irrelevant.

Share this post


Link to post
Share on other sites

Current setup of my PDW

 

DSCF1161.JPG

 

Needs a few minor tweaks and it'll be getting resprayed. Also going to replace the gearbox as the current frankenbox is quite frankly boiling my urine with all the issues it keeps developing after I sort one out.

  • Like 1

Share this post


Link to post
Share on other sites

DMR project I'm working on. Missing some bits and pieces but the gun is sitting about 200 miles away from me at the moment, so next week I'll add them, repaint, and post again.

 

dmrl.png

  • Like 1

Share this post


Link to post
Share on other sites

 

VFC PEQ....the pressure pad is actually pinched between the top rail and the bolt on side rail piece right next to the PEQ...

 

Does the PEQ not get in the way of your grip? Doesnt' seem like a lot of room between the handstop and the PEQ.

Share this post


Link to post
Share on other sites

Nope, its actually mirror the position of the light on the other side, they are more in line with the front sight...this pic might give you where every thing is relatively..

large.jpglarge.jpg

 

I just need to move my support thumb to actuate the rear push switch of the light, or press the pressure switch for the PEQ. Sorry for the cell pic...lol

Edited by RacingManiac

Share this post


Link to post
Share on other sites

And even more Of a reasOn Im digging these slimmed down rails, I run a double switch for both my Peq and mini scout right where your running the switch for the Peq. You seem to be able to almost fully wrap your hand around that rail, I have to reach over to actuate my switch when shooting lefty. Kinda strage at first but it's like any overly wrapped magpul grip

Share this post


Link to post
Share on other sites

Last Pics of my beauty for a long time!

 

iwtpubq6.jpg9njvublz.jpgj7yc2r2z.jpgkcs7tofn.jpg7jxwj9f3.jpg

 

 

Specs:

Iron Airsoft Parts: Larue Stealth Lower Receiver & 1003k WA Stain Hop Up Round

G&P WA Parts: M4 Commando Steel Outer Barrel, Assemble Steel Parts Set (A), Tri Bearing Hammer Set (WP137), M4 Steel Sear (WP33), M4 Hammer Lock (WP57), Reinforced 150% Spring & Pin Set (WP115), Anti Rotation Links & Buttstock Speed Buffer (WP95)

PRECISION Fire Pin Block & SHS Steel Firing Pin for WA M4 GBB

Inokatsu M4 Super Bolt (Steel) 2010 Version

RA-TECH Recoil Spring (Summer Type)

5KU HOP UP Barrel Guide

Madbull Parts: 6.03mm Black Python Ver.2 Tight Bore Barrel (300mm) & X spacer

Prometheus Air Seal Chamber Packing (Soft Type)

Magpul PTS AAC M4 2000 Silencer w/ Flash Hider (CW, DX Version, BK)

DPMS Parts: Pivot Pin Front, Take Down Pin Rear, Takedown/Pivot Pin Detent x2, Detent Spring x2 & Trigger Pin

LaRue Parts: Tactical STEALTH Upper Receiver Assembly (M4 Feed Ramps) LT-007, Tactical 7.0" Handguard LT15-7, 1.25 Inch Swivel x2 & A-PEG Grip (AR15, Rough & Black)

LMT Parts: SOPMOD Stock Gen 2, 6-position Mil-Spec carbine receiver extension, Heavy CAR Buffer, End Plate & Castle Nut

PRI Parts: Gas Block With Top Picatinny Rail, Fat Boy Gas Tube Carbine AR-15 & M84 Gas Buster® Charging Handle -Military Big Latch

Tango Down Rail Panel 6” Black (BP-4BLK) x2

Troy Front & Rear Folding BattleSight (LaRue Branded)

Blue Force Gear VCAS Sling (OA Model) Black

Flashlight: Surefire M900A with Larue Tactical LT170 Mount

Optics: Aimpoint T-1 2MOA Sight (2011) with LaRue Absolut-Cowitness Mount (LT751) & EoTech G33 Gen 3 STS Magnifier (2012)

 

Cheers

 

orb

Share this post


Link to post
Share on other sites

And even more Of a reasOn Im digging these slimmed down rails, I run a double switch for both my Peq and mini scout right where your running the switch for the Peq. You seem to be able to almost fully wrap your hand around that rail, I have to reach over to actuate my switch when shooting lefty. Kinda strage at first but it's like any overly wrapped magpul grip

 

Going from my older Larue style rail to this is really something very interesting. It almost feels like you are holding a spear or something as its so thin(basically just a bit bigger than the OD of the suppressor).

Share this post


Link to post
Share on other sites

Nope, its actually mirror the position of the light on the other side, they are more in line with the front sight...this pic might give you where every thing is relatively..

 

 

I just need to move my support thumb to actuate the rear push switch of the light, or press the pressure switch for the PEQ. Sorry for the cell pic...lol

 

Ah cool. Guess it was the angle from that last pic. I'm really digging the slim handguards now too. Been skirmishing with my URX3 a lot recently. Here she is as of last Saturday's game. Couple of updates I guess, can't really remember what I've added since the last time I posted her haha.

 

0E9C853A-E3E0-4433-A0B6-DA2E0943FE2C-9955-00000A6F00492C51.jpg

  • Like 2

Share this post


Link to post
Share on other sites

Yeah I'm thinking next/ current aeg build I'm using a newfangled slim rail

 

Interestingly, the new issue of "Recoil" magazine has a collection of the new slim rail and some of their spec(they picked 2 sizes of each type, one around 9-10" and one over 12"). The MI rail is one of the lightest around the 9" size, and the lightest 12+" rail.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.