hitmanNo2 Posted November 24, 2016 Report Share Posted November 24, 2016 Plus, it's kind of a bit special. You don't tend to see many people rocking them so it stands out more in the fields of Scouts, WMLs e.t.c. 1 Quote Link to post Share on other sites
wazzy1013 Posted November 26, 2016 Report Share Posted November 26, 2016 yeah, ive been looking at that model for like 2-3yrs now, like the led, strobe, and being a lefty, under barrel is where I want to situate the lif9 Quote Link to post Share on other sites
quiksilver6184 Posted December 15, 2016 Report Share Posted December 15, 2016 3 Quote Link to post Share on other sites
wolfgeorge Posted December 15, 2016 Report Share Posted December 15, 2016 Nice!!!!!!How long is the RIS? Wolf Quote Link to post Share on other sites
quiksilver6184 Posted December 17, 2016 Report Share Posted December 17, 2016 Its 13.5" and I have a 12.5" outer installed. I just ordered a battlecomp 1.0. Hopefully that will be more flush with the end of the rail. Quote Link to post Share on other sites
icolater Posted December 20, 2016 Report Share Posted December 20, 2016 G&p or aps? Quote Link to post Share on other sites
quiksilver6184 Posted December 20, 2016 Report Share Posted December 20, 2016 It's actually a classic army, with an angry gun lvoa rail, and a g&p 12.5 barrel. Quote Link to post Share on other sites
Dj_komodo Posted December 30, 2016 Report Share Posted December 30, 2016 (edited) WE M4 (RA-Tech) AAC300 (Magazine is non functioning but looks better on picture ) Edited December 30, 2016 by Dj_komodo 10 Quote Link to post Share on other sites
Lone_Bullet Posted December 30, 2016 Report Share Posted December 30, 2016 Quite the build! love it 1 Quote Link to post Share on other sites
icolater Posted December 31, 2016 Report Share Posted December 31, 2016 Nice !!! Have one similar in the pipe line, got ghk receveirs with AAC MPW markings instead of the ra recevier. 1 Quote Link to post Share on other sites
CALLAHAN_88 Posted January 1, 2017 Report Share Posted January 1, 2017 3 Quote Link to post Share on other sites
Beeingmyself Posted January 2, 2017 Report Share Posted January 2, 2017 (edited) Edited January 2, 2017 by Beeingmyself Quote Link to post Share on other sites
Ivan le Fou Posted January 6, 2017 Report Share Posted January 6, 2017 Pew.™ 7 Quote Link to post Share on other sites
aznriptide859 Posted January 8, 2017 Report Share Posted January 8, 2017 Is that an older SMR Mk4? Those Keymod panels or MLOK panels? Quote Link to post Share on other sites
Ivan le Fou Posted January 8, 2017 Report Share Posted January 8, 2017 First version of the SMR MK4.The panels are from a previous KAC handguard, I just had to machine the correct screws to hold them in place. Quote Link to post Share on other sites
CALLAHAN_88 Posted January 9, 2017 Report Share Posted January 9, 2017 Ivan le Fou nice as allways! 1 Quote Link to post Share on other sites
Brigg Posted January 15, 2017 Report Share Posted January 15, 2017 Though I have posted this before, I just got this back from being cerakoted. Well, the lower was cerakoted anyway. I didn't want to paint an original LE SP1 upper. So here's my custom GBB Colt SMG again, now with nice paint! I think the lower matches as well as it's every likely to using paint. I recently machined new internals for some of the conversion parts out of steel so now it's functioning much better then it had been. The aluminum parts were wearing very quickly. and now I'm debating whether I want to refinish the selector and pins, or if I like them worn looking. 12 Quote Link to post Share on other sites
Mr.Schnabel Posted January 18, 2017 Report Share Posted January 18, 2017 Mommy ... can i go out and kill tonight? ...Vipertech M4a1+ Colt 1/N Stock+ John Masen Butt Pad+ Colt M16a1 Grip+ Kac 300m BUIS+ Eotech 551+ Boonie Packer Gen.1 Redi-mag+ KAC MRE Rail+ Surefire 6P+ ITI CVL+ G&P An/Peq2a ( Laser/light version )+ G-Grip ( Lone Star Ordnance grip )+ V-Tac wide padded Sling.... Still needs an Eotech riser ... except G&P peq´n base gun RS parts ...Cheers 7 Quote Link to post Share on other sites
Lone_Bullet Posted January 19, 2017 Report Share Posted January 19, 2017 I feel like taking a life ^^ Sent from my C6603 using Tapatalk 1 Quote Link to post Share on other sites
fantus Posted January 24, 2017 Report Share Posted January 24, 2017 Hi to all, I'm not sure if this is the right place but i try to build new front on my G&G and i have a problem....any ideas about the gap? Quote Link to post Share on other sites
fantus Posted January 24, 2017 Report Share Posted January 24, 2017 Hi to all, I'm not sure if this is the right place but i try to build new front on my G&G and i have a problem....any ideas about the gap? Quote Link to post Share on other sites
bladerunner168 Posted January 24, 2017 Report Share Posted January 24, 2017 Hi to all, I'm not sure if this is the right place but i try to build new front on my G&G and i have a problem....any ideas about the gap? This isn't the thread you're looking for, post your problems here http://arniesairsoft.co.uk/forums/index.php?/forum/10-technical-discussion/ Quote Link to post Share on other sites
Brigg Posted February 1, 2017 Report Share Posted February 1, 2017 (edited) So, heres the final destination of my WE to KWC mag conversion. It took a long time but I finally built a gas blowback Colt 633 "DOE carbine" aka Briefcase model. Due to a slight mishap with underestimating the thickness of the paint, the current barrel is unpainted, but will be once it stops snowing. the paint had to be removed to fit it and now i have to turn it down just slightly so it works with the paint. Unfortunately the paint also takes a week to cure and i am the least patient man in the world. So unpainted steel barrel it is! Im really glad to have gotten this build done (Aside from the unpainted barrel) . it was a whole mess of measuring and machining, trial and error, and all sorts of swearing and the like. But i think after this I have a way better understanding of the guts of a gas blowback system. Just like the previous 635 iteration of this build, the 633 build uses a kwc mini uzi mag. im considering cutting up one of the mags i destroyed in testing and brazing it to the bottom of another to get the "correct" 30 round mag length. Edit: I also forgot to change out the flat A1 delta ring for a tapered A2 delta ring. one is in the mail. Edited February 1, 2017 by Brigg 12 Quote Link to post Share on other sites
Katotaka Posted February 1, 2017 Report Share Posted February 1, 2017 Dude, no great work is done without swearing 1 Quote Link to post Share on other sites
bladerunner168 Posted February 5, 2017 Report Share Posted February 5, 2017 GHK KAC SR-16 Tokyo Marui 4 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.