Mike_West Posted September 2, 2011 Report Share Posted September 2, 2011 Niiiiice. :] Quote Link to post Share on other sites
gisburn20 Posted September 9, 2011 Report Share Posted September 9, 2011 Yay , I bought one today, nicely made bit of kit under all the rails. All the rails, sights and stock are sitting in the parts box now and it handles very nicely with a PTS MOE stock and a Simmons 1.5-5x 20 scope. Will be looking for an RS wood stock asap though. Anyone else struggle with the included speed loader? It was scratching the bb's and very fiddly to use. I had better luck using a TM stanag loader and keeping it in place with thumb and finger (of the hand holding the mag) either side of the nozzle/feed lips. I'm also going to try removing the "barrel extension" inside the outer barrel , and replacing it with some foam in the hopes of quietening down the muzzle report. Jim Quote Link to post Share on other sites
gisburn20 Posted September 10, 2011 Report Share Posted September 10, 2011 here she is! Anyone know where the long 30 round mags are cheapest? I think they look a better bet , they load from the bottom of the slot like the newer TM GBB mags. (check out the RA tech review video) Jim Quote Link to post Share on other sites
gisburn20 Posted September 13, 2011 Report Share Posted September 13, 2011 New thread started on the 10/22 to leave this one free for reviews. http://www.arniesairsoft.co.uk/forums/index.php?/topic/199358-kj-works-kc-02-ruger-1022-thread/page__pid__2487453&do=findComment&comment=2487453 feel free to add any hints n tips you find, or just ask questions. Jim Quote Link to post Share on other sites
Grindstone Posted September 13, 2011 Report Share Posted September 13, 2011 Has anybody fitted this to a RS 10/22 stock? Searches show nothing but speculation. Quote Link to post Share on other sites
Mike_West Posted September 13, 2011 Report Share Posted September 13, 2011 Yes, your search-fu is weak: http://www.arniesairsoft.co.uk/forums/index.php?/topic/192094-kjw-1022-gbb/page__view__findpost__p__2433061 Quote Link to post Share on other sites
Grindstone Posted September 14, 2011 Report Share Posted September 14, 2011 Yes, your search-fu is weak: http://www.arniesairsoft.co.uk/forums/index.php?/topic/192094-kjw-1022-gbb/page__view__findpost__p__2433061 ... I shall retire from the internets in shame Thank you Quote Link to post Share on other sites
gisburn20 Posted October 23, 2011 Report Share Posted October 23, 2011 Thought I would drop this in here... Real Steel Ruger Laminated Target stock. Dremelled out a notch on the stock for the "tang" on the KJW's receiver ( the real one doesnt have this) rocked the receiver/barrel into place and added a longer front stock screw (about 1/2 inch longer) All in about 40 minutes work, the next will be quicker, maybe a hogue synthetic stock? Jim Quote Link to post Share on other sites
rwoodcock01 Posted November 17, 2011 Report Share Posted November 17, 2011 Mine arrived yesterday and I think the best way to describe it is.... Awesome! There where a few things i noticed and these are just my intial thoughts: Check the magazine screws are tight, the first mag vented as the locking screw was a little loose. The Buffer tube seems to be a little odd in size as my Magpul CTR stock with friction lock is a little loose, nothing a differnt buffer tupe or a bit of electrical tape can't fix. Its light, my wife (an airsofter herself) finds it very comfortable. Very pointable more so than my normal M4's that I use. Intial plinking shots give you a lovely grin factor. Still getting used to the 10/22 and my RaTech 6.01 and Falcon Hop rubber are en-route and can't wait to install them. My intial thoughts are very positive for my first GBB rife and look forward to some time to play with this rifle. Cheers Rich 1 Quote Link to post Share on other sites
number47 Posted December 10, 2011 Report Share Posted December 10, 2011 Just bought one of these, very happy with it so far. With regard to real steel stocks, can anyone tell me if it matters if the stock is for the slim or bull barrelled version? Locking at a RS stock with a folding butt. Number 47 Quote Link to post Share on other sites
Mike_West Posted December 12, 2011 Report Share Posted December 12, 2011 OK. Now I'm not sure what to get: a KC02 with the intent of rebuilding it to look like the sniper rifle from Deus Ex Human Revolution, or just go the easy way and get an ACM SR25 and knockoff Magpul furniture. Quote Link to post Share on other sites
gisburn20 Posted December 12, 2011 Report Share Posted December 12, 2011 With regard to real steel stocks, can anyone tell me if it matters if the stock is for the slim or bull barrelled version? Its the bull barreled or target version , they refer to it as 0.92 inch barrel also My RS target stock just needed a groove cutting out for the "tang" on the kjw receiver where the rear stock screw goes , this isnt present on the RS. Jim Quote Link to post Share on other sites
groquik Posted February 23, 2012 Report Share Posted February 23, 2012 mine for the family album 1 Quote Link to post Share on other sites
bankz5152 Posted March 13, 2012 Report Share Posted March 13, 2012 Anyone know where a wood stock for one of these? Or at least a synthetic one Quote Link to post Share on other sites
Lax Posted March 14, 2012 Report Share Posted March 14, 2012 Ratech, available at their shop or at ehobby i.e. Quote Link to post Share on other sites
Mike_West Posted March 14, 2012 Report Share Posted March 14, 2012 Anyone know where a wood stock for one of these? Or at least a synthetic one Or grab a RS one from the US. I should pick up my Muzzelite soonish (it's stuck in customs right now), fitting shouldn't be much of a problem. Quote Link to post Share on other sites
gisburn20 Posted March 20, 2012 Report Share Posted March 20, 2012 Anyone know where a wood stock for one of these? Or at least a synthetic one ebay.co.uk has a few RS 10/22 stocks and the mod is very simple. See the thread in my sig. Jim Quote Link to post Share on other sites
Nath Posted March 27, 2012 Report Share Posted March 27, 2012 Any idea how to get this gun to shoot over 600FPS? Quote Link to post Share on other sites
Mike_West Posted March 28, 2012 Report Share Posted March 28, 2012 Any idea how to get this gun to shoot over 600FPS? Excuse me, are you insane? Quote Link to post Share on other sites
hwagan Posted March 28, 2012 Report Share Posted March 28, 2012 Any idea how to get this gun to shoot over 600FPS? The longest tightbore you can find and a massive *fruitcage* off silencer. Quote Link to post Share on other sites
Mike_West Posted March 28, 2012 Report Share Posted March 28, 2012 The longest tightbore you can find and a massive *fruitcage* off silencer. I doubt that. The longest is 509mm - see my gun, I posted a photo in the other 10/22 thread. On top of that, you need at least a 150mm silencer, CCW. And still the output will be around 500 fps (haven't chronoed it yet, though, it's a rough estimate).It's impossible, and unnecessary, to crank it that hot. 1 Quote Link to post Share on other sites
Nath Posted March 28, 2012 Report Share Posted March 28, 2012 Excuse me, are you insane? Average stock ACM assault rifle clocks at 450FPS, so I'm affraid that to have that edge in range (making KC02 a quite decent marksman weapon) I would need like 600FPS (more less). That would be a hot shooting one, but still not the hottest I saw (spring action A&K SVD behemoth clocking aroun 695FPS). On the other hand I wonder how high yours will clock. Putting a 455mm Prometheus tightbore into my TK/KJW M4 gave me around 550FPS (sunny day, 20 deg. C), which was rather crazy for an assault rifle, so I installed the stock barrel back. Quote Link to post Share on other sites
bankz5152 Posted March 28, 2012 Report Share Posted March 28, 2012 (edited) For range you do not need 600fps. Range is more to do with the Hop Unit, Rubber, Nub & rounds than FPS. Mine is currently shooting about 450 - 460fps and is accuratley hitting 150ft. Once the rubber beds in a little more and ive done a little more tweeking should hit 200ft. Raw power will not give you what you want unless the rest is done to match. My TM MEU (315fps warmish day) out ranged my old WE G39 (450fps warmish day) almost everytime. I also had a CO2 Uzi which was doing about 550fps but only shot around 40ft accurately. Edited March 28, 2012 by bankz5152 Quote Link to post Share on other sites
Nath Posted March 28, 2012 Report Share Posted March 28, 2012 All true. Don't get me wrong guys. My question was more like theorycrafting. Like I wrote in my previous post, I did an experiment on my gas M4 and the result was... well, much more than I expected. I was just curious if same thing applies to KC-02. Waiting for more info on how much fps Mike_West squeezed. Quote Link to post Share on other sites
Mike_West Posted March 28, 2012 Report Share Posted March 28, 2012 It does 420 on the stock 250mm barrel. Once I get my hands on a chrono (not before Easter), I'll check - people managed to reach 460 on a 363mm barrel, so I believe a 509mm should give at least 500. Also, I have absolutely no clue how to adjust the HU now that I have the adjustment wheel locked inside the stock. Maybe I'll seek some sucker willing to part with his broken MB05, fitting the Ruger inside that will be easier and more practical. A MB08 wouldn't be bad either - Ruger 10/22 AICS, because why the hell not. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.