bart Posted October 31, 2011 Report Share Posted October 31, 2011 hi New Japanese products in stock at Firesupport RCC Recoil Spring for Marui G26 RCC Main Spring for Marui M92F RCC Recoil Spring for Marui M92F Mode2 Carbon Suppressor Long (270x42 CW/CCW) RCC High Route Valve for MARUI PY RCC Torsion Spring Set for MARUI PY [Trigger SP 70%,Hammer SP 130% RCC Main Spring for Marui P226 RCC Recoil Spring for Marui P226 RCC Cylinder Valve for Marui P226 KM Head Rubber Chamber Hardness '45 for Marui MP7,VZ61,G18C,M93R,USP Prometheus EG spring guide Tornado Shaft type Ver.9 (AK74MN) RCC Recoil Spring for Marui FN5-7 Diamond Ring Efficient Stock Rot for Marui SOPMODM4,M4CQBR Prometheus Stock Terminal conversion kit for SOPMOD M4 CQBR FIRST Hard Inner block for SOPMOD M4 FiRST Hard Buffer Ring for SOPMOD M4 Prometheus Advaned Power EG Hard Gear "Torque" for AEG Shoot & Recoil ver. Diamond Ring Barrel Wrench & Stock Wrench for Marui SOPMODM4 Prometheus Hard Piston new ver2 for SOPMOD M4 Prometheus Hard Piston new ver1 for AK74MN/G36K RCC Cylinder Valve for Marui Px4 RCC Main Spring for Marui Px4 RCC Recoil Spring for Marui Px4 Nineball Tritium sight for Marui G18C BLK FIRST Sling Plate for M4(Shoot & Recoil ver.) Nineball Tritium sight for Marui PX4 BLK Prometheus EG Barrel 380mm/MASADA 14.5inch outer Prometheus EG Barrel 318mm/MASADA 11.5inch outer FIRST Metal Lower Frame (Colt) for M4(Shoot & Recoil ver.) Prometheus Hard Piston new ver2 for SCAR Tanaka (MakerParts) No-4 SearLever for Browning HP Tanaka (MakerParts) No-5 Sear Pin for Browning HP Maruzen (Magazine) for APS-2 KM-Head (Muzzle Adaptor) for MP5 Kurtz/PDW To 14mm CW LayLax(FIRST) PSS2 Piston for APS-2,96 LayLax(FIRST) PSS2 Spring M110 (Thin Type) for APS-2 LayLax(FIRST) PSS2 Spring M150 (Thick Type) for APS-2 LayLax(FIRST) PSS2 Spring M170 (Thick Type) for APS-2 LayLax(FIRST) PSS2 Spring M210 (Thick Type) for APS-2 Fire Fly (Hop UP Packin) for Marui AEG [soft] Tanio-Koba (Hop Up Twist Inner Barrel) for Marui AEG M4 CAW/Mosquito (Muzzle Adaptor) for G3 To 14mm CCW LayLax(Prometheus) Gold Pin Connector set for Mini-Connector LayLax(Prometheus) Gold Pin set for Motor (8pcs) LayLax(Prometheus) Element cord Tanaka Magazine for gas : M700/M24/M40 (Normal) LayLax(Prometheus) EG Barrel 509mm/M16A1,A2,VN,AUG LayLax(Prometheus) EG Barrel 363mm/M4,SR16,SG551,AK102 LayLax(Prometheus) EG Barrel 229mm/MP5A4,A5,SD,AK-Beta LayLax(Prometheus) Piston Head [POM] LayLax(Prometheus) Piston Head [Metal] LayLax(Prometheus) Hard Piston V2,V3 Tanio-Koba (Hop Up Twist Inner Barrel) for Marui AEG M733/Thompson LayLax(Prometheus) (Bush) Sintered Alloy for Ver2,3 LayLax(Prometheus) Hard Selector Plate for M16 LayLax(Prometheus) Air Seal Chamber Packing for AEG Barrel [soft/purple] LayLax(Prometheus) Air Seal Chamber Packing for AEG Barrel [Hard/Red] LayLax(FIRST) PSS10 Mount Base for VSR10 LayLax(FIRST) PSS10 Damper Cylinder Head for VSR10 LayLax(FIRST) PSS10 Spring Guide for VSR10 LayLax(FIRST) PSS10 Spring 100sp for VSR10 LayLax(FIRST) PSS10 Spring 120sp for VSR10 LayLax(FIRST) PSS10 Spring 150sp for VSR10 LayLax(FIRST) PSS10 Spring 170sp for VSR10 LayLax(FIRST) PSS10 High Pressure Piston NEO with silent shaft for VSR10/Red LayLax(FIRST) PSS10 Silent Dumper for VSR10 (for Dumper Head) LayLax(Prometheus) Shim Set includes 6-each of 0.1/0.2/0.3/0.5 LayLax(Prometheus) Stainless Hard Cylinder for Marui AEG ( fit Barrel 450～401mm long LayLax(NineBall) Main Spring for Marui HI-CAPA LayLax(FIRST) PSS10 Zero-Trigger for VSR10 (Normal Trigger) include an exclusive piston LayLax(NineBall) Spring-Plunger set for Marui Hi-Capa LayLax(NineBall) Inner Barrel for Marui P226 Rail & G17 /97mm LayLax(FIRST) PSS10 Air-Seal CHAMBER for VSR10 (Use Marui AEG Barrel) LayLax(Prometheus) EG Barrel 420mm/ for M14 /short Tanio-Koba (Hop Up Twist Inner Barrel) for Marui AEG M14 & M16 Tanio-Koba (Hop Up Twist Inner Barrel) for Marui HI-CAPA 4.3 LayLax(NineBall) Inner Barrel for Marui Hi-CAPA4.3 /Normal LayLax(NineBall) Inner Barrel for Marui MP7 Normal 182mm LayLax(NineBall) Muzzle Fitting (14mm CW) for Marui MP7 Big Out (Buffer Rubber for Marui AEG) H-HOP LayLax(NineBall) Sling Swivels End for MP7 LayLax(Prometheus) Metal Chamber NEO (for Marui M16A2/M4A1) Tanio-Koba (Hop Up Twist Inner Barrel) for Marui HI-CAPA 5.1 & M1911A1 LayLax(NineBall) Dyna-piston head for Marui Hi-CAPA,GM M1911,P226,G26 Fire Fly Chamber Packing [soft] for Marui VSR10,M1911A1,P226,HiCAPA,G26,SOCOM Fire Fly Chamber Packing [Hard] for Marui VSR10,M1911A1,P226,HiCAPA,G26,SOCOM Fire Fly (Cylinder Valve) for Marui MEU,M1911A1,Hi-Capa,P226 Tanio-Koba (Hop Up Twist Inner Barrel) for Marui G17/P226 RAIL LayLax(NineBall) Inner Barrel for Marui USP (AEG/Fixed)/111.5mm LayLax(NineBall) (Rubber Magazine End) for Marui HI-CAPA (1-pc per Pack) LayLax(Prometheus) EG Barrel 455mm/AK47,47S RCC (Recoil Spring) for Marui G17 Fire Fly (Buffer Rubber) for Marui AEG [Normal] LayLax(Prometheus) Sealing Nozzle for SOPMOD M4 Freedom Art (Swivel ring) for Stock Pipe (Fit SOPMOD M4) LayLax(Prometheus) Hard Cut Off Lever for Vr.6 P90 LayLax(NineBall) Smooth Ring (POM) for Recoil Spring for Marui FN5-7 CAROM (Wood Grip) for M1911 (Rose Wood/Smooth with Colt medal) LayLax(FIRST) Barrel Lock Shim Set for M4(Shoot & Recoil ver.) LayLax(FIRST) Hard Barrel Base for M4(Shoot & Recoil ver.) LayLax(FIRST) (Ring Wrench) for M4(Shoot & Recoil ver.) Freedom Art (Swivel Plate) for Stock Pipe (Fit SOPMOD M4) LayLax(Prometheus) Piston Head SH for Marui High Cycle AEG TOP (Magazine for AEG/Ultimate Ejection ver.) M4/30round TOP (Plastic Cartridge for AEG/Ultimate Ejection ver.) for M4 (30-rds) See RCC GBB Upgrade Springs Prometheus barrels and AEG upgrade parts Nineball Pistol Upgrade parts Freedon Art TOP FireFly Big Out Carom Tanio Koba barrel and Many More www.fire-support.co.uk Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.