DangerWerx Posted November 1, 2011 Report Share Posted November 1, 2011 Hey guys, Its been awhile since I announced my vsr-10 hop up levers. My first batch was a bag of mixed results, so I had to go back and tweak a few things about it. The CQB Valve and Mp9 barrels then took my main attention and the levers went on the back burner. Fast forward a few months and my work slate has been mostly cleared and I have pulled this back out to the main light. After a few tweaks, the prints were sent off to be prototyped and I am now looking for other opinions ( aside from my own) Anyways. I am looking for 15-20 beta testers who; - Have a fingered hop up rubber installed or on hand. (optional) - Can take a baseline grouping of shots with stock hop up arms. ( with hop up settings recorded) - Can install the hop up lever - Take notes and record results. (again, with hop up settings) - Report back findings. Now, I cannot offer any of you monetary compensation, but what I can do is offer to let you keep the beta arms and also send a production arm when they are ready. If you are interested, Shoot me a PM with the following info.. Name: Vsr-10 or Bar-10: Current FPS: BB Weight(s) used: Upgrades: Country: As I am in the USA, I will be favoring those who are local to me. This does not mean I will not be sending them abroad. Shipping will be covered by myself. And so, Any takers? - Dave * Mods, if this post is inappropriate for this forum, please excuse my actions. Link to post Share on other sites
chas Posted November 1, 2011 Report Share Posted November 1, 2011 HI! I dont own a VSR myself, but I wanna be the first (at least on this forum) to congratulate you on both having the ingenuity to make your own parts and having players test them out to get feedback and make your product better. Airsoft companies in general could take a lesson. I wish you all the success in the world! Link to post Share on other sites
The Bushman Posted November 1, 2011 Report Share Posted November 1, 2011 As always.... I'm in Good Hunting Link to post Share on other sites
DangerWerx Posted November 1, 2011 Author Report Share Posted November 1, 2011 HI! I dont own a VSR myself, but I wanna be the first (at least on this forum) to congratulate you on both having the ingenuity to make your own parts and having players test them out to get feedback and make your product better. Airsoft companies in general could take a lesson. I wish you all the success in the world! Thanks! I just think it is better to hold off a product, even if it means 2-3 months of delay, to make something that just plain works the first time. I know I hate it when I have to wait for gen 2 or 3 of a model before I can use it as intended. Why should people be used as paying test subjects? Well, I feel this way about physical goods at least. As always.... I'm in Good Hunting Haha! You already had a lever earmarked. Link to post Share on other sites
Traha Posted November 25, 2011 Report Share Posted November 25, 2011 I have I'm not the only one who sent you a PM and did not make a post here. Time to make a post here to bring some attention to this. Link to post Share on other sites
DangerWerx Posted November 26, 2011 Author Report Share Posted November 26, 2011 Sorry for the lack of updates. I am basically waiting on retailer checks to arrive.No capital to send for the production. I'll make another post once I get paid Link to post Share on other sites
mayhem.mange Posted November 27, 2011 Report Share Posted November 27, 2011 DangerWerx: I was one of the guys who bought some of your first batch , and one thing that i noticed from that batch was that they werent all exactly alligned. But that didnt matter had a friend who could file them and we took off the pin that met the hopuprubber. Once that was done we used a H-nub between the lever and hopup and man it was sweet. Small right hook thanks to the wind but they all hit their mark. :D :D Link to post Share on other sites
scar527 Posted November 28, 2011 Report Share Posted November 28, 2011 I'm using mine with a standard hop rubber(King Arms) and MAN it is accurate. I have no issues hitting a torso sized target EVERY time at 70m, and can lob with a fair degree of accuracy even further. Link to post Share on other sites
The Bushman Posted November 28, 2011 Report Share Posted November 28, 2011 The first batch gave my sons BAR10, the ability to go beyond 0.30g The extra lift, means he now uses 0.36g GUARDER and has brilliant trajectory considering the gun is just under 400fps (chrono'd with 0.20g) He uses the 9ball VSR hop rubber. Rest of the rifle is stock JG. Looking forward to the MK2 DANGERWERX FTW! Good Hunting Link to post Share on other sites
minijosh Posted November 30, 2011 Report Share Posted November 30, 2011 Once I get my cylinder gets fixed I'll test stuff for you. Link to post Share on other sites
DangerWerx Posted December 30, 2011 Author Report Share Posted December 30, 2011 Quick update. Samples arrived! Testers, be on the look out, I'll be sending out soon. Link to post Share on other sites
astagg Posted January 1, 2012 Report Share Posted January 1, 2012 if your still looking for some more testers I will give one a blast Link to post Share on other sites
mayhem.mange Posted January 4, 2012 Report Share Posted January 4, 2012 Well im always up for another batch so just say when and im ready ^.^ Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.