Gish Posted January 18, 2012 Report Share Posted January 18, 2012 Hello All, A review of the Source Hydration ILPS system. For a while now I have been searching for a hydration system to integrate into my LBT 6094 Slick carrier. The idea was is that the Slick being the base system for all my current rigs I would like to keep the hydration on it. Some requirements I was seeking - Around 2L capacity - Easy to refill - Very low profile After looking at various ideas for low profile carriers to be molle adapted and not finding one that I particularly liked I stumbled upon the Source Hydration systems. I've have heard of Source before from some mountain biker friends and was pleased they had a military division with hydration solutions. At first I was interested in the 1L Kangaroo - It seemed to fit the requirements, however contacting source on depth (Which was not listed) they said that it sticks out close to 5-6 inches at the base. It's more designed as a canteen replacement then a low profile system. I then noticed the ILPS system. Reading the information page it was designed to be inserted into a plate pocket. Perfect! For airsoft use i'm not really using the plate pocket at the moment except for a fake SAPI plate this could take it's place. And so it arrived direct from source Overall The whole package consists of the hydration pouch, a CB fabric covered hose and the UTA filler A brief side note on the UTA / I have to say this is a very ingenious system for refilling hydration carriers, especially those that are integrated into gear or stashed away deep in a pack. For a video of it in action check it out I briefly tested it and it works perfectly as advertised. Now I can easily fill in field from a few 1/2L jugs. The overall size of the ILPS is about that of a Medium (Replica) sapi plate with it having no more then 1/2 inch extra width in comparison. It is listed at Length 14.1 Width 10.6 Depth 2.6 Empty When filled to it's full 3L capacity it surprisingly does not change shape all that much. Full Compare One of the reason is there is a center rib in the hydration pouch to prevent the shape from changing to much. It also keeps the profile of very low In a side comparison the ILPS sticks up no more then the top edge of a SAPI plate would. In addition I plan on only filling to 1.5/2L capacity which will lower the profile even more. Side Comparison When inserted in the Slick carrier it feels very much like the fake SAPI. Since it's moving around it tends to mold to my back which makes it surprisingly comfortable Inside the Plate carrier Hose The hose is very well built and all the connecters are very robust. All connecters have a strong latching system and seal very well. I cannot foresee any issues with it. Bite valve The bite valve is also of a very good design. It has a turn and pull system to prevent accidental opening and the water flow is very good. Some people may not like this. Overall this seems to be a great solution for hydration. Pros - Will easily fit inside the space designed for a SAPI plate. Which many airsofters do not have filled - Carries a good amount of water - Innovative refill system means you do not need to gear down/remove the system - Wide top mouth for easy cleaning Cons - Since in my use it is close to my body. Water may be heated up due to this (May add a small layer of insulation to prevent) - May need to mod your plate carrier for hose placement. As I use it more I expect to find some more pros/cons but for now I am very pleased with the system. If anyone has any questions/comments please let me know! Cheers Quote Link to post Share on other sites
Lone_Bullet Posted January 18, 2012 Report Share Posted January 18, 2012 Seems a very handy alternative! I don't have questions, nor do I need one as my 3 systems have hydration integrated, but please post a skirm / comfort report! Thanks Quote Link to post Share on other sites
ArboristArmy Posted January 18, 2012 Report Share Posted January 18, 2012 Does anyone know of any UK retailers? Quote Link to post Share on other sites
TheFull9 Posted January 18, 2012 Report Share Posted January 18, 2012 Another great hydro product from Source, loving their stuff. Seems ideal for airsoft really seeing as so many of us use rigs with plate pouches but have no need for the armour itself. Thanks for highlighting this Gish, top quality review. Quote Link to post Share on other sites
Hatchet Posted January 18, 2012 Report Share Posted January 18, 2012 I have one of these and they also fit in the back of the 5.11 LBE vests, which gives you another option if you're not a plate carrier sort of person. In that setup they also help balance out mags, etc. on the front quite nicely. I ordered mine online from the source website without really thinking about it and was surprised when it turned up shortly afterwards with post tags from Israel. Quote Link to post Share on other sites
ArboristArmy Posted January 19, 2012 Report Share Posted January 19, 2012 Just ordered the 2L version from Trojan Group to fit in my WAS low profile hydro carrier. WAS says the carrier can hold a 3L bladder but the measurements for the 3L source were quite a bit larger than that of the carrier, so we will soon see if I maid the right choice. Quote Link to post Share on other sites
kojak Posted January 19, 2012 Report Share Posted January 19, 2012 I wonder if that's the proper bladder for my TAG "small" hydration carrier? The 50 oz. bladder they sell is the same one I have--way too long. Quote Link to post Share on other sites
sigma3 Posted January 20, 2012 Report Share Posted January 20, 2012 The one photographed there, at least, is the 3L that I have. Quote Link to post Share on other sites
ArboristArmy Posted January 21, 2012 Report Share Posted January 21, 2012 Woo! got mine today. Very impressed, fits into my hydro carrier nicely. Quote Link to post Share on other sites
Scuffer Posted February 17, 2012 Report Share Posted February 17, 2012 Just want to add to this: I ordered a Source ILPS bladder from their site (£40 odd all in) on the 13th of Feb, it turned up today. Very impressed with the website/ordering system/speed of postage delivery. The bladder it's self is very nice, I've owned a few bladders and hydros and this is by far the nicest. The construction of all the attachments (hose/bite valves/UTA) is spot on, each having a internal valve to stop leakages when no accessory is attached, the fact that they are all easily replaceable from Source is an added bonus. The actual bladder seems to be very robust and I'm sure it'll stand up to any abuse I can give it during a skirmish. I've fitted it into the rear platebag a replica JPC, you have to fold the top handle of the bladder down to fit it in once full, but it is a nice snug fit and can probably take about 3/4 of the bladders capacity before it starts to buldge out more than a SAPI plate should. If you are after a hydro of any type I'd say Source is the way to go, if you want to run your rig as HSLD as possible then the ILPS bladder is perfect. Quote Link to post Share on other sites
RSM Posted February 17, 2012 Report Share Posted February 17, 2012 Nice review:) I've been using Source products for years - mainly because I was a cheap student airsofter who wanted a 2L hydro carrier and found a MOD trial one on ebay for £20. Served me very well until I managed to bit through the mouth piece - a short e-mail to Source and I was sent a free replacement, hows that for customer service? Few years later tactical-kit gets them in at very reasonable price and they've got the nicer features such as the 'locking' disconnect valves and the UTA (I also have one, awesome bit of kit). The difference between the normal 2L/3L shaped ones is that the 3L is about 2 inches longer, I haven't measured both full but as the width of the two sizes is the same I don't think it buldges that much further. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.