Zmarre Posted February 7, 2012 Report Share Posted February 7, 2012 My brother asked me to upgrade his Warrior1 L96 replica rifle from 400FPS to about 550FPS. Through some google-fu I discovered that it should be compatible with APS-2 parts. So I ordered this Guarder APS-2/Type 96 spring, however I found out that the piston is too small for that spring... Now, is there any other spring that fits? Am I doing something wrongly wrong? Or is it that rifle that's built with the absolute wrong sizes? Link to post Share on other sites
Zmarre Posted February 13, 2012 Author Report Share Posted February 13, 2012 Hmpff, nobody? Link to post Share on other sites
shmook Posted February 14, 2012 Report Share Posted February 14, 2012 I used PDI bits in mine, the 150 spring was giving around 500 fps Edit, PDI type 96 spring, 9mm I/D with matching spring guide. There are 2 types of spring, 7 and 9mm internal diameter. Link to post Share on other sites
thre3aces Posted April 4, 2012 Report Share Posted April 4, 2012 Hmpff, nobody? You need. New piston spring guide and spring Sent from my mythical enchanted asynchronous 3VO Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.