Stinky Posted July 27, 2012 Report Share Posted July 27, 2012 Thinking of selling my TM Aug SR to help fund college. Pic (more later today). Specs: External: TM Aug SR Phantom Kit Psuedo multicam paint job is slightly more DE then normal multicam, best for drier western united states environments (was specific for California Central Valley scrub grass and foliage colors). Custom Foregrip NOTE: This is mounted to the main receiver body with through holes in the receiver just in front of the hand guard. So there are 2 holes there, both are not very noticeable if one wanted to not use the forgrip, could be easily filled and covered with a dab of paint to blend with the camo. Harris style bipod, mounts to foregrip and can be made loose for the pivot effect the Harris offers or run tight (screw on bottom adjusts this). One modded short sniper mag, looks pretty epic on this Aug if I do say so myself. Mechbox: CA reinforced v3 MB CA high torque motor Torque up gear set (cannot remember manufacturer) Guarder Aug bore up kit Original TM white plastic piston. For high power mods is one of the best pistons you can use, lasts forever but if things go wrong will break before hurting other parts. This one is in perfect condition, rack is in great shape still. It has been spaced and the teeth shaved for AOE perfection. Other then that mod it looks brand new. Hate to part with it, might replace with whatever high power piston is popular. ABS plastic piston head spacer for AOE. PDI 650mm tightbore m160 Spring Custom wire harness, all 16 gauge with direct solder to tabs. 11.1v Lipo (Brand new only 3 charge cycles, always kept balanced). Internal Mods: Dyna-mat sound suppression material in receiver body. Custom steal tubing barrel supporter from hop unit through barrel block well into phantom kit. This supports the 650mm tightbore eliminating sagging and makes this AEG the most accurate Airsoft sniper possible. Other Gas and spring fully upgraded beasts can match it, but nothing is going to out class this AEG for shear accuracy and tight grouping at extreme range. It takes experience with the AEG to maximize it, but once its tuned in with the barrel shimmed with teflon and masking tape and everything greased up and ready to go, its just crazy accurate with the right ammo. Its fully tuned right now except for the hop, I don't have enough space available to tune that in just right, but its functioning well and all that requires is spinning the dial and 10-20 ranging shots to get it set just right. Screw limiter for single shot only, can be easily removed to return auto function, but not suggested with the heavy spring and 11.1v Thicker mechbox retention plate, actually 2 of them. Installed short type for maximum battery space. Second spare is full length retention plate only thicker. Both will withstand the abuse of very strong springs. Larger screws as well, and larger set nuts in the receiver body. All much stronger then the original design. Some missing bits, front outer barrel of standard Aug, fairly cheap to buy replacement online though. Front vertical grip and pin. Inner plastic barrel the hop mounts to has been modded onto the steal barrel supporter so that is sort of gone, sort of serving a higher and more useful purpose. More pics later today. What do you estimate? Link to post Share on other sites
Stinky Posted July 1, 2013 Author Report Share Posted July 1, 2013 Bump, still would like a price estimate on this AEG. Link to post Share on other sites
hawaiianjuggernaut Posted July 1, 2013 Report Share Posted July 1, 2013 I'd say $300 range. Link to post Share on other sites
hawaiianjuggernaut Posted July 16, 2013 Report Share Posted July 16, 2013 It is probably worth 400+ range actually, but a sale might not happen until $300 Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.