mr eagle Posted October 30, 2013 Report Share Posted October 30, 2013 New WE CO2 magazines: https://www.facebook.com/media/set/?set=a.651554598201985.1073741831.302822296408552&type=3 I do love them though Quote Link to post Share on other sites
vzx Posted November 1, 2013 Report Share Posted November 1, 2013 If RA-tech made a CNC replacement hammer assembly for the M&P... 1 Quote Link to post Share on other sites
uscmCorps Posted January 6, 2014 Report Share Posted January 6, 2014 I was just sent some samples to test. A pleasant surprise ... I do love these base pads and use them on my real M&P. Quote Link to post Share on other sites
Bucko Posted January 6, 2014 Report Share Posted January 6, 2014 I'm guessing that threaded barrel is on your real M&P? I'm contemplating jumping on a WE to build it up with the Ace1 SAI slide and trigger coming out soon... I'm also looking at the real one as my first handgun. It'd be followed by the P226 Mk25, but that'll be a ways out... Quote Link to post Share on other sites
uscmCorps Posted January 6, 2014 Report Share Posted January 6, 2014 I have a stormlake threaded barrel but I don't have it installed in the gun due to CA laws. The WE M&P I find to be a gamble. It could be awesome, it could also be a complete POS. The real M&P is a great gun. Not quite as accurate as a Glock past 25 yards but still a good gun. Trigger is meh though. Get that upgraded with new sights as soon as you get it. Quote Link to post Share on other sites
TnL Posted January 6, 2014 Report Share Posted January 6, 2014 I have a stormlake threaded barrel but I don't have it installed in the gun due to CA laws. The WE M&P I find to be a gamble. It could be awesome, it could also be a complete POS. The real M&P is a great gun. Not quite as accurate as a Glock past 25 yards but still a good gun. Trigger is meh though. Get that upgraded with new sights as soon as you get it. well, why do you live in kommunist kalifornia, anyways?!?! lol what kind of law outlaws threaded barrels? is it because if you have a threaded barrel your going to suppress it and be a super assassin? I would love to move to the states from this trash heap of a socialist country, but california is like the one place in the states thats even worse than Canada, they call SKSs Assault rifles there! Quote Link to post Share on other sites
uscmCorps Posted January 7, 2014 Report Share Posted January 7, 2014 Cali has it's pluses and minuses. The fact that much of the country is hunkered down for a miserable winter while I'm walking around in t-shirt and shorts is one of them. LOL The law regarding the threaded barrels is that it implies intent to suppress. It's pretty stupid. And it's totally OT. But I like the look of it on my airsoft M&P and that's all that matters. The threaded barrel is just one of WE's thread extensions with a knurled thread protector. It came bundled together in a package listed as ADM (as in "American Defense Manufacturing"). LOL. And it is quite clearly NOT an ADM product. Basically WE's way of once again up to some trickery: FYI, the 10-8 replica baseplates are by DyTac. They also make them for KSC and TM Glocks. Quote Link to post Share on other sites
NonEx Posted January 8, 2014 Report Share Posted January 8, 2014 Cali has it's pluses and minuses. The fact that much of the country is hunkered down for a miserable winter while I'm walking around in t-shirt and shorts is one of them. LOL The law regarding the threaded barrels is that it implies intent to suppress. It's pretty stupid. And it's totally OT. But I like the look of it on my airsoft M&P and that's all that matters. The threaded barrel is just one of WE's thread extensions with a knurled thread protector. It came bundled together in a package listed as ADM (as in "American Defense Manufacturing"). LOL. And it is quite clearly NOT an ADM product. Basically WE's way of once again up to some trickery: FYI, the 10-8 replica baseplates are by DyTac. They also make them for KSC and TM Glocks. I really want that thread protector but I can't find it anywhere. All I see are the 16mm ones which I don't think fit. Can you help me out ? Thanks. 1 Quote Link to post Share on other sites
uscmCorps Posted January 8, 2014 Report Share Posted January 8, 2014 I have a couple brand new spares but it wasn't cheap. They're not entirely common. If you're genuinely interested in it I can sell it to you and mail it. Quote Link to post Share on other sites
NonEx Posted January 8, 2014 Report Share Posted January 8, 2014 I sure am my good sir, PM incoming! Quote Link to post Share on other sites
blablabla Posted January 26, 2014 Report Share Posted January 26, 2014 Anybody has a lead on HK3P M&P in stock ? Preferably the full-size model... Airsoftglobal has the compact model, but not the full sized. Did some searching around but nothing popped up. Quote Link to post Share on other sites
hitmanNo2 Posted January 26, 2014 Report Share Posted January 26, 2014 May as well wait for the VFC in March surely? Quote Link to post Share on other sites
blablabla Posted January 26, 2014 Report Share Posted January 26, 2014 nah mate, on a budget... Quote Link to post Share on other sites
NonEx Posted January 26, 2014 Report Share Posted January 26, 2014 (edited) A video CRW posted recently stated that the full size M&P with marked lower frame is no longer being produced. Possibly from pressure from Cybergun in preperations for the upcoming full size VFC M&P ? http://www.youtube.com/watch?v=b7VD5s17oEs Right at the start of the video. Why the F doesn't the YouTube links pre-load the viewer all the time !?!? Edited January 26, 2014 by NonEx Quote Link to post Share on other sites
hitmanNo2 Posted January 26, 2014 Report Share Posted January 26, 2014 Weird. They always post OK for me. You're just straight up copying and pasting the link from the address bar right? Quote Link to post Share on other sites
blablabla Posted January 26, 2014 Report Share Posted January 26, 2014 hmm seems legit about the Cybergun thing. They already have the compact model don't they ? Quote Link to post Share on other sites
NonEx Posted January 26, 2014 Report Share Posted January 26, 2014 (edited) I do. I had the problem a few days ago, and posting the URL in another thread made it work. So dunno. Yeah they do have the compact model out. But my logic is that since the compact is already out, but the full size is about to be launched, they might take action to dry up stock on the HK full size so that their model is the only fully traded full size available for purchase. Just a theory of course. The traded HK compact came out after Cybergun so they might not have given it as much energy. Edited January 26, 2014 by NonEx Quote Link to post Share on other sites
blablabla Posted February 25, 2014 Report Share Posted February 25, 2014 Anybody has some news on the fullsize 9mm M&P from Cybergun ? Can't seem to find it on their site or I could be going blind, that's also an option... Quote Link to post Share on other sites
NonEx Posted February 25, 2014 Report Share Posted February 25, 2014 There was some post on arms-cool showing some pics but beyond that nothing. Quote Link to post Share on other sites
jkpics Posted March 25, 2014 Report Share Posted March 25, 2014 Just tested a batch of 12 new WE M&P9's yesterday, nor a single one was able to auto fire, or not cock the hammer when pulling up on the slide, they also had a QC sticker in the mag well. WE might be taking QC more serious now. 1 Quote Link to post Share on other sites
WTF?Shane Posted March 25, 2014 Report Share Posted March 25, 2014 Sounds good. How much rounds were fired per gun to conduct your test? Quote Link to post Share on other sites
jkpics Posted March 25, 2014 Report Share Posted March 25, 2014 5-10 shots pr gun, with a CO2 mag, moving the trigger back as slowly as possible, IMHO they work out of the box now, and if they pick up the known problems down the road, they a easily fixed, shimming the BBU and filing the trigger part. Quote Link to post Share on other sites
NonEx Posted April 1, 2014 Report Share Posted April 1, 2014 Here are some pics of my WE Ace1Arms SAI build, WIP; HK3 tan frame and SAI trigger is in customs 2 Quote Link to post Share on other sites
Norotor Posted April 2, 2014 Report Share Posted April 2, 2014 Detonator VTAC sights and ATEI costa 5 inch slide WANT!! Quote Link to post Share on other sites
WTF?Shane Posted April 2, 2014 Report Share Posted April 2, 2014 LOL. Have you seen the price for the Detonator slides??? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.