Finbarqs Posted April 10, 2014 Report Share Posted April 10, 2014 I like it enough... now really contemplating G17 Premium.. not too sure if I like the short grip of the 19... As far as quality goes, I'd say it's okay. But then again, I didn't have ridiculous expectations like I did with the Ino 1911. AND it wasn't priced ridiculous like the ino, so my disappointment didn't amount to anything on the G19. I don't own a real G19, so obviously I can't compare. But it's just ever so slightly heavier. I was expecting it to feel like a real gun, but hey, if that happened then the gun won't cycle at all! I think it'll run okay on green gas, just not as snappy as CO2. Hence, I'm contemplating on G17 Premium... my match is good enough I think, since it'll run ideal on GG. Quote Link to post Share on other sites
Squad 701 Posted April 10, 2014 Report Share Posted April 10, 2014 (edited) I don't own a real G19, so obviously I can't compare. But it's just ever so slightly heavier. I was expecting it to feel like a real gun, but hey, if that happened then the gun won't cycle at all!The SA Premium G19 weighs 831g, so It's not too far off the real steel fully loaded weight of 850g. Having fired both steel-slide and CNC'd version of the Glock 17 with CO2, the CNC Glock 17 which comes complete with steel barrel is more favourable for skirmishing using CO2. Edited April 11, 2014 by Squad 701 Quote Link to post Share on other sites
Norsk22771 Posted April 12, 2014 Report Share Posted April 12, 2014 Okay, after i shoot with green gas, it dosent seem that the bolt actualy lock when the mag is emty :/ idk why? does anybody know how many seconds u gone fill? Quote Link to post Share on other sites
Squad 701 Posted April 14, 2014 Report Share Posted April 14, 2014 For Norsk, Here are the SA Glock CO2 details : The plastic tab at the bottom of the spring is what releases the bumper, and also the spring unfortunately, otherwise it can be quite fiddly as the cap underneath the bumper can get wedged between the bumper and magazine if you loosen too much, which is the recommended way as shown in the instructions on top. 1 Quote Link to post Share on other sites
Norsk22771 Posted April 14, 2014 Report Share Posted April 14, 2014 Thank you Squad 701 Gone buy the co2 mags very soon Quote Link to post Share on other sites
Burner1352 Posted April 14, 2014 Report Share Posted April 14, 2014 Ok I'm hoping someone can help me. I am trying to figure out where the spring and trigger bar link into each other plus the rest of the guts at the rear. I have most of the guts in. Just these last few Sent from my LG-D803 using Tapatalk Quote Link to post Share on other sites
mh78 Posted April 15, 2014 Report Share Posted April 15, 2014 There's several extensive Marui Glock re-assembly vids on Youtube that helps. Quote Link to post Share on other sites
Burner1352 Posted April 15, 2014 Report Share Posted April 15, 2014 Thanks Sent from my LG-D803 using Tapatalk Quote Link to post Share on other sites
emp3ror86 Posted April 15, 2014 Report Share Posted April 15, 2014 (edited) CO2 magazines are released yet? Edited April 15, 2014 by emp3ror86 Quote Link to post Share on other sites
Norsk22771 Posted April 15, 2014 Report Share Posted April 15, 2014 Yes http://www.bomanufacture.com/en/store/marque-9-stark-arms/ss-categorie-145-co2 Quote Link to post Share on other sites
Finbarqs Posted April 22, 2014 Report Share Posted April 22, 2014 alright, I ordered the G17 Premium also.... Quote Link to post Share on other sites
kagami Posted April 23, 2014 Report Share Posted April 23, 2014 I've been mostly paying attention to this thread so forgive me if it's already been posted but did anyone catch this lol? http://www.bomanufacture.com/en/produit-543-stark-arms-s17-match-gbb-co2-pistol is this factory stock? I dont know anyone who would make SAI style slides and not correct trademarks on them if it was aftermarket... Quote Link to post Share on other sites
garry Posted April 27, 2014 Report Share Posted April 27, 2014 Not normally into Glocks, but I do like the look of that... Quote Link to post Share on other sites
Norsk22771 Posted April 28, 2014 Report Share Posted April 28, 2014 (edited) Okay got my Co2 mags from BOManufacture and they work great with the stock gun the recoil kicks hard, almost littlebit scary. And the BB's is exploding out of the barrel, idk FPS but it is good for a pistol Edited April 28, 2014 by Norsk22771 Quote Link to post Share on other sites
Squad 701 Posted April 28, 2014 Report Share Posted April 28, 2014 Okay got my Co2 mags from BOManufacture and they work great with the stock gun the recoil kicks hard, almost littlebit scary. And the BB's is exploding out of the barrel, idk FPS but it is good for a pistol That's good to hear Bear in mind when the weather gets hot the slide might start locking back and fail to return to battery with the stock springs, as they are quite weak for the force of CO2. I think it's only a matter of swapping the springs out for a TM stock 1911 spring, maybe cut shorter to size required. NonEx may answer this as I'm sure he tried changing springs on his. Cheers. Quote Link to post Share on other sites
Finbarqs Posted May 1, 2014 Report Share Posted May 1, 2014 Hey NonEx, did you ever get your pistol? My G17 premo is held up in customs right now, being "explored on" awaiting clearance from ups... been almost 3 weeks now... 1.5 weeks in customs. Quote Link to post Share on other sites
NonEx Posted May 3, 2014 Report Share Posted May 3, 2014 (edited) Nope. Still in customs, no idea what's going on. Gonna ask again on monday next week. Mine is up to a month now in customs. Edited May 3, 2014 by NonEx Quote Link to post Share on other sites
Finbarqs Posted May 3, 2014 Report Share Posted May 3, 2014 yeah my G17 Premium is in customs.. going on 2 weeks now... Quote Link to post Share on other sites
L4gi Posted May 5, 2014 Report Share Posted May 5, 2014 (edited) Hey fellas. Ran into a small problem when shooting my SA G19. I had fired maybe 5-10 magazines total within around 30 minutes, and all of a sudden the gun jammed. The slide got stuck coming forward, about 1-2 cm from its "starting position". I tried helping the slide back forward, but eventually I had to take the slide apart, apply a ton of silicone spray and put it back together. It works now, but the slide doesnt go all the way forward. I think I saw someone post something about this earlier, but they had the problem from the start. Feeds ok with a full load of gas, but nearing the end it wont feed properly. Might be cause the nozzle is really far forward when shooting. Third pic has the little plastic bit around 1mm from where it used to be, can only get it to go all the way with a lot of force, but then it just goes back like it is. Heres a few pictures, maybe someone can tell me whats going on and if its normal; if not, possible fixes. https://www.dropbox.com/s/d4gw8vpzd70ztw1/20140505_202037.jpg https://www.dropbox.com/s/vflyrbzf46c1ooa/20140505_202151.jpg https://www.dropbox.com/s/8dvu5b4mqlmigq3/20140505_202217.jpg (Sorry for the link, dropbox doesnt want to work with forums always) Edited May 5, 2014 by L4gi Quote Link to post Share on other sites
Finbarqs Posted May 10, 2014 Report Share Posted May 10, 2014 Wondering if that glock lawsuit has anything to do with it... 400 usd (and whatever NonEx paid also) is no small chunk of change to throw away... I should start a paypal dispute.. Sent from my iPhone using Tapatalk Quote Link to post Share on other sites
Tisane Posted May 11, 2014 Report Share Posted May 11, 2014 (edited) PayPal dispute won't get you anywhere if its stuck in customs, that is no fault of the sender whatsoever. I ordered one a week or so ago and mine has just got to the customs charging part, so I should have mine by the end of next week I hope.....fingers crossed. Edited May 11, 2014 by Tisane Quote Link to post Share on other sites
uscmCorps Posted May 11, 2014 Report Share Posted May 11, 2014 Are the higher end stark Glocks available in HK? I'm here in HK right now and I'd like to pick some up. Quote Link to post Share on other sites
Tisane Posted May 11, 2014 Report Share Posted May 11, 2014 Only Ehobbyasia as far as I'm aware. Quote Link to post Share on other sites
Squad 701 Posted May 11, 2014 Report Share Posted May 11, 2014 Are the higher end stark Glocks available in HK? I'm here in HK right now and I'd like to pick some up. Hey there, Try UnCo, they should have both steel versions in stock ! http://www.uncompany.com/pageproductdetails.asp?prodid=35576 Quote Link to post Share on other sites
intinerious Posted May 11, 2014 Report Share Posted May 11, 2014 Are the higher end stark Glocks available in HK? I'm here in HK right now and I'd like to pick some up. WGC has it for 2k hkd. Probably the the only shop on kws that has it. Dunno how ehobby and unco are priced though. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.